Thank you, after swing hard at it I have got the SDR solution working with the WH65B, now I need to figure out the WH31B - Will post separately.
On Sunday, January 27, 2019 at 3:00:35 PM UTC-6, mwall wrote: > > > > On Sunday, January 27, 2019 at 9:59:52 AM UTC-5, torrin wrote: >> >> Ya, I have been banging against it. I can't sniff packets due to my >> network setup. When I read the guides, there was a lot of talk about USB >> drivers so I had hoped I could pull data from the USB port on the WS-2000. >> I might try the SDR bit. >>> >>> > these configurations *should* work with the kit you have: > > option 1: rpi bridge between wifi and wired. configure the rpi as a wifi > access point. connect the rpi wired interface to your wired network. > connect the ws2000 to the ssid advertised by the rpi. > > option 1a: rpi sniffs traffic. with the rpi configured as a bridge (or > router), sniff the traffic coming from the ws2000; make the > weewx-interceptor sniff traffic on the rpi wifi interface (or the wired > interface, for that matter). > > option 1b: rpi listens for traffic. make the rpi a dns server for the > wifi ssid that it advertises. make the dns entry for the host the ws2000 > is looking for be the rpi. make weewx-interceptor listen for connections > on the rpi wifi interface. the station will talk directly to weewx. > > option 2: rpi listens for traffic. configure dns on your lan so that the > rpi is the wunderground destination. make weewx-interceptor listen for > http traffic. the station will talk directly to weewx. > > sorry i do not have recipes for each of these, but i have had each of > these configurations working at one time or another. > > m > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
