I did the same. I will be taking a swing at the WH32B this weekend to capture data to be added as a new device, but the WH25 worked with 30 seconds of setup.
On Friday, February 8, 2019 at 10:52:06 AM UTC-6, G Hammer wrote: > > You can purchase a WH25B then you'll have indoor temp humidity and > barometer with SDR. > I spent quite a bit of time on sniffing the data and eventually decided to > get the dongle and WH25B and forget Interceptor. > > > On Tuesday, January 1, 2019 at 7:03:59 AM UTC-5, Zsolt Máté wrote: >> >> I tried, something is not working or I'm doing something wrong. >> >> On Wednesday, January 2, 2019 at 12:53:42 AM UTC+13, Andrew Milner wrote: >>> >>> with the interceptor driver >>> >>> >>> >>> On Tuesday, 1 January 2019 13:42:18 UTC+2, Zsolt Máté wrote: >>>> >>>> I ran tcpdump on my router an I got this: >>>> GET >>>> /weatherstation/updateweatherstation.php?ID=*****&PASSWORD=****&indoortempf=72.5&tempf=64.4&dewptf=59.7&windchillf=64.4&indoorhumidity=52&humidity=85&windspeedmph=0.0&windgustmph=0.0&winddir=198&absbaromin=29.63&baromin=29.60&rainin=0.00&dailyrainin=0.00&weeklyrainin=0.31&monthlyrainin=0.00&solarradiation=0.00&UV=0&dateutc=2019-1-1%2011:38:47&softwaretype=EasyWeatherV1.2.3&action=updateraw&realtime=1&rtfreq=5 >>>> >>>> HTTP/1.0 >>>> >>>> The question is, how can I intercept and interpret this communication >>>> from my raspi? >>>> >>>> On Wednesday, January 2, 2019 at 12:32:34 AM UTC+13, Zsolt Máté wrote: >>>>> >>>>> The console has no USB port, it's communicating via WiFi. >>>>> >>>>> On Tuesday, January 1, 2019 at 8:05:28 PM UTC+13, mwall wrote: >>>>>> >>>>>> >>>>>> >>>>>> On Tuesday, January 1, 2019 at 12:10:46 AM UTC-5, Zsolt Máté wrote: >>>>>>> >>>>>>> >>>>>>> Is there a way to get the barometer readout as well? >>>>>>> >>>>>> >>>>>> not using rtl_433/weewx-sdr. the pressure sensor is located in your >>>>>> weather station console, so the pressure data are never sent. rtl_433 >>>>>> picks up only the transmissions from the instrument cluster (and any >>>>>> remote >>>>>> temperature/humidity sensors), not the console. >>>>>> >>>>>> you'll have to intercept the data sent by the console (e.g., using >>>>>> the weewx-interceptor driver) or figure out some way to probe the >>>>>> console >>>>>> for data (does it have a usb port that responds to data requests?) >>>>>> >>>>>> m >>>>>> >>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
