To enable INIT settings, should I remove # sign at beginning of each line? On Thursday, February 28, 2019 at 2:32:15 PM UTC+1, Thomas Keffer wrote: > > 1. It looks like you're using the WeatherLinkIP logger in your Vantage. > These are generally not as reliable as the serial and USB versions and, as > you discovered, depend on the network being up before the Vantage is useful. > > I am not a boot expert, but try this: go into /etc/init.d/weewx and > change this > > ### BEGIN INIT INFO > # Provides: weewx > # Required-Start: $local_fs $remote_fs $syslog $time > # Required-Stop: $local_fs $remote_fs $syslog > # Default-Start: 2 3 4 5 > # Default-Stop: 0 1 6 > # Short-Description: weewx weather system > # Description: Manages the weewx weather system > ### END INIT INFO > > > to this > > ### BEGIN INIT INFO > # Provides: weewx > # Required-Start: $local_fs $remote_fs $syslog $networking $time > # Required-Stop: $local_fs $remote_fs $syslog > # Default-Start: 2 3 4 5 > # Default-Stop: 0 1 6 > # Short-Description: weewx weather system > # Description: Manages the weewx weather system > ### END INIT INFO > > This says that the system should not run WeeWX until the network is up. > What I'm not sure of is how Debian defines "up." Worth a try. > > 2. The clock must also be set. Either use a hardware real time clock > (RTC), or remove the "fake clock" by following these directions > <https://github.com/weewx/weewx/wiki/Raspberry-Pi#b-remove-the-fake-clock> > . > > On Thu, Feb 28, 2019 at 3:57 AM David Hindley <hind...@gmail.com > <javascript:>> wrote: > >> Many Thanks. >> >> 1. I will do as you suggest re separate log files. >> >> 3. The cron task was something I had to add after installing the >> belchertown skin, just to copy some files from one directory to another, on >> the Rpi, before then using sftp to upload to my website. It seems to work >> most of the time, but, as you say, this seemed to be when the corruption >> occurred. The CRON job works every five minutes at 1,6,11... minutes past >> each hour - on the basis that weewx should have updated the archive etc by >> then - maybe that is something to do with it. >> >> 4. Further down the log file, I see: >> >> Feb 27 15:17:04 raspberrypi weewx[379]: Starting weewx weather system: >> weewxerror: unexpectedly disconnected from boot status daemon >> >> and then... >> >> Feb 27 15:17:05 raspberrypi weewx[423]: engine: Initializing weewx >> version 3.9.1 >> Feb 27 15:17:05 raspberrypi weewx[423]: engine: Using Python 2.7.13 >> (default, Sep 26 2018, 18:42:22) #012[GCC 6.3.0 20170516] >> Feb 27 15:17:05 raspberrypi weewx[423]: engine: Platform >> Linux-4.14.79-v7+-armv7l-with-debian-9.6 >> Feb 27 15:17:05 raspberrypi weewx[423]: engine: Locale is 'en_GB.UTF-8' >> Feb 27 15:17:05 raspberrypi weewx[423]: engine: pid file is >> /var/run/weewx.pid >> Feb 27 15:17:05 raspberrypi weewx[467]: engine: Using configuration file >> /etc/weewx/weewx.conf >> Feb 27 15:17:05 raspberrypi weewx[467]: engine: Debug is 1 >> Feb 27 15:17:05 raspberrypi weewx[379]: . >> Feb 27 15:17:05 raspberrypi systemd[1]: Started LSB: weewx weather system. >> Feb 27 15:17:05 raspberrypi weewx[467]: engine: Initializing engine >> Feb 27 15:17:05 raspberrypi weewx[467]: engine: Loading station type >> Vantage (weewx.drivers.vantage) >> Feb 27 15:17:06 raspberrypi weewx[467]: vantage: Driver version is 3.1.1 >> Feb 27 15:17:06 raspberrypi weewx[467]: vantage: Socket error while >> opening port 22222 to ethernet host 10.0.1.83. >> Feb 27 15:17:06 raspberrypi weewx[467]: import of driver failed: [Errno >> 101] Network is unreachable (<class 'weewx.WeeWxIOError'>) >> Feb 27 15:17:06 raspberrypi weewx[467]: engine: Unable to load driver: >> [Errno 101] Network is unreachable >> Feb 27 15:17:06 raspberrypi weewx[467]: **** Exiting... >> >> So, looks like the internet connection went down perhaps? (I was away >> when all this happened yesterday, so not sure) >> >> Good point re making sure weewx doesn't restart until it has a sensible >> time via valid NTP connection - any idea how I do that? I will order an >> RTC anyway I think. >> >> Thanks >> >> David. >> >> On Thu, 28 Feb 2019 at 11:25, Andrew Milner <andrew.s...@gmail.com >> <javascript:>> wrote: >> >>> 1. I recommend you put weewx log messages in their own log file - see >>> wiki for a) separate logfile and also logrotation. >>> 2. The ^@ rubbish looks like possible corruption whilst executing a >>> cron task >>> 3. What cron task was it trying to execute >>> 4. I see the clock has gone backwards around the rubbish point - >>> implying the rpi has rebooted itself. If that is the case you need to >>> ensure that weewx does not restart again until it has a sensible time - or >>> fit an RTC to your rpi >>> >>> All looks like some form of corruption - power supply perhaps or memory >>> card problem which is then causing a pi reboot and should cause a weewx >>> restart - but the log portion you posted does not run long enough to give >>> weewx restart details and ensure it held off until it had a valid time and >>> ntp connection. >>> >>> >>> >>> On Thursday, 28 February 2019 13:10:57 UTC+2, David Hindley wrote: >>>> >>>> Thanks. I agree that it is probably the Raspberry Pi, rather than >>>> weewx. My syslog file around the relevant time that it stopped working >>>> yesterday is as follows. Does anyone have any idea how to interpret this? >>>> The "^@" is very puzzling to a linux novice such as me! >>>> >>>> David. >>>> >>>> Feb 27 15:30:28 raspberrypi weewx[9312]: sftp: uploaded file >>>> /belchertown/graphs/index.html >>>> Feb 27 15:30:28 raspberrypi weewx[9312]: sftp: create remote directory >>>> /belchertown/records >>>> Feb 27 15:30:29 raspberrypi weewx[9312]: sftp: uploaded file >>>> /belchertown/records/index.html >>>> Feb 27 15:30:29 raspberrypi weewx[9312]: sftp: create remote directory >>>> /belchertown/reports >>>> Feb 27 15:30:29 raspberrypi weewx[9312]: sftp: uploaded file >>>> /belchertown/reports/index.html >>>> Feb 27 15:30:29 raspberrypi weewx[9312]: sftp: create remote directory >>>> /belchertown/about >>>> Feb 27 15:30:29 raspberrypi weewx[9312]: sftp: uploaded file >>>> /belchertown/about/index.html >>>> Feb 27 15:30:29 raspberrypi weewx[9312]: sftp: create remote directory >>>> /belchertown/images >>>> Feb 27 15:30:29 raspberrypi weewx[9312]: sftp: create remote directory >>>> /reports >>>> Feb 27 15:30:29 raspberrypi weewx[9312]: sftp: uploaded file >>>> /reports/index.html >>>> Feb 27 15:30:29 raspberrypi weewx[9312]: sftp: create remote directory >>>> /about >>>> Feb 27 15:30:29 raspberrypi weewx[9312]: sftp: uploaded file >>>> /about/index.html >>>> Feb 27 15:30:29 raspberrypi weewx[9312]: sftp: create remote directory >>>> /images >>>> Feb 27 15:30:30 raspberrypi weewx[9312]: sftpgenerator: transferred 34 >>>> files in 7.72 seconds >>>> Feb 27 15:30:30 raspberrypi weewx[9312]: reportengine: Running report >>>> 'Highcharts_Belchertown' >>>> Feb 27 15:30:30 raspberrypi weewx[9312]: reportengine: Found >>>> configuration file /etc/weewx/skins/Highcharts_Belchertown/skin.conf for >>>> report 'Highcharts_Belchertown' >>>> Feb 27 15:30:30 raspberrypi weewx[9312]: cheetahgenerator: using search >>>> list ['weewx.cheetahgenerator.Almanac', 'weewx.cheetahgenerator.Station', >>>> 'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.Stats', >>>> 'weewx.cheetahgenerator.UnitInfo', 'weewx.cheetahgenerator.Extras', >>>> 'user.belchertown_highchartsSearchX.$ >>>> Feb 27 15:30:30 raspberrypi weewx[9312]: manager: Daily summary version >>>> is 2.0 >>>> Feb 27 15:30:44 raspberrypi weewx[9312]: cheetahgenerator: Generated 4 >>>> files for report Highcharts_Belchertown in 14.36 seconds >>>> Feb 27 15:30:44 raspberrypi weewx[9312]: copygenerator: copied 0 files >>>> to /var/www/html/weewx/belchertown >>>> Feb 27 15:30:44 raspberrypi weewx[9312]: reportengine: Running report >>>> 'Belchertown' >>>> Feb 27 15:30:44 raspberrypi weewx[9312]: reportengine: Found >>>> configuration file /etc/weewx/skins/Belchertown/skin.conf for report >>>> 'Belchertown' >>>> Feb 27 15:30:44 raspberrypi weewx[9312]: cheetahgenerator: using search >>>> list ['weewx.cheetahgenerator.Almanac', 'weewx.cheetahgenerator.Station', >>>> 'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.Stats', >>>> 'weewx.cheetahgenerator.UnitInfo', 'weewx.cheetahgenerator.Extras', >>>> 'user.belchertown.getData'] >>>> Feb 27 15:30:44 raspberrypi weewx[9312]: manager: Daily summary version >>>> is 2.0 >>>> Feb 27 15:30:47 raspberrypi weewx[9312]: cheetahgenerator: Generated 12 >>>> files for report Belchertown in 3.13 seconds >>>> Feb 27 15:30:47 raspberrypi weewx[9312]: copygenerator: copied 1 files >>>> to /var/www/html/weewx/belchertown >>>> Feb 27 15:30:47 raspberrypi weewx[9312]: reportengine: Running report >>>> 'FTP' >>>> Feb 27 15:30:47 raspberrypi weewx[9312]: reportengine: Found >>>> configuration file /etc/weewx/skins/Ftp/skin.conf for report 'FTP' >>>> Feb 27 15:30:47 raspberrypi weewx[9312]: ftpgenerator: FTP upload not >>>> requested. Skipped. >>>> Feb 27 15:30:47 raspberrypi weewx[9312]: reportengine: Running report >>>> 'RSYNC' >>>> Feb 27 15:30:47 raspberrypi weewx[9312]: reportengine: Found >>>> configuration file /etc/weewx/skins/Rsync/skin.conf for report 'RSYNC' >>>> Feb 27 15:30:47 raspberrypi weewx[9312]: rsyncgenerator: rsync upload >>>> not requested. Skipped. >>>> Feb 27 15:31:01 raspberrypi CRON[12528]: (pi) CMD (sudo cp -f >>>> /var/www/html/weewx/belchertown/json/day.json >>>> /var/www/html/weewx/belchertown/json/week.json >>>> /var/www/html/weewx/belchertown/json/month.json >>>> /var/www/html/weewx/belchertown/json/year.json /var/www/html/weewx/json) >>>> >>>> ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@$ >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] Booting Linux on >>>> physical CPU 0x0 >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] Linux version >>>> 4.14.79-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG >>>> crosstool-ng-1.22.0-88-g8460611)) #1159 SMP Sun Nov 4 17:50:20 GMT 2018 >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] CPU: ARMv7 Processor >>>> [410fd034] revision 4 (ARMv7), cr=10c5383d >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] CPU: div >>>> instructions available: patching division code >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] CPU: PIPT / VIPT >>>> nonaliasing data cache, VIPT aliasing instruction cache >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] OF: fdt: Machine >>>> model: Raspberry Pi 3 Model B Plus Rev 1.3 >>>> Feb 27 15:17:04 raspberrypi fake-hwclock[87]: Wed 27 Feb 15:17:01 UTC >>>> 2019 >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] Memory policy: Data >>>> cache writealloc >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] cma: Reserved 8 MiB >>>> at 0x3ac00000 >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] On node 0 >>>> totalpages: 242688 >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] free_area_init_node: >>>> node 0, pgdat 80c85280, node_mem_map ba39f000 >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] Normal zone: 2133 >>>> pages used for memmap >>>> Feb 27 15:17:04 raspberrypi systemd[1]: Started Apply Kernel Variables. >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] Normal zone: 0 >>>> pages reserved >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] Normal zone: >>>> 242688 pages, LIFO batch:31 >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] percpu: Embedded 17 >>>> pages/cpu @ba348000 s38720 r8192 d22720 u69632 >>>> Feb 27 15:17:04 raspberrypi systemd[1]: Started File System Check >>>> Daemon to report status. >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] pcpu-alloc: s38720 >>>> r8192 d22720 u69632 alloc=17*4096 >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] pcpu-alloc: [0] 0 >>>> [0] 1 [0] 2 [0] 3 >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] Built 1 zonelists, >>>> mobility grouping on. Total pages: 240555 >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] Kernel command line: >>>> 8250.nr_uarts=0 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 >>>> bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 >>>> dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 >>>> rootfstype=ext4 elevator=deadli$ >>>> Feb 27 15:17:04 raspberrypi systemd-fsck[119]: e2fsck 1.43.4 >>>> (31-Jan-2017) >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] PID hash table >>>> entries: 4096 (order: 2, 16384 bytes) >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] Dentry cache hash >>>> table entries: 131072 (order: 7, 524288 bytes) >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] Inode-cache hash >>>> table entries: 65536 (order: 6, 262144 bytes) >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] Memory: >>>> 940232K/970752K available (7168K kernel code, 576K rwdata, 2076K rodata, >>>> 1024K init, 698K bss, 22328K reserved, 8192K cma-reserved) >>>> Feb 27 15:17:04 raspberrypi systemd[1]: Started Create Static Device >>>> Nodes in /dev. >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] Virtual kernel >>>> memory layout: >>>> Feb 27 15:17:04 raspberrypi kernel: [ 0.000000] vector : >>>> 0xffff0000 - 0xffff1000 ( 4 kB) >>>> >>>> >>>> On Thu, 28 Feb 2019 at 10:33, Andrew Milner <andrew.s...@gmail.com> >>>> wrote: >>>> >>>>> The best tip I can give you is to identify why the site is crashing by >>>>> looking at the weewx and webserver logs. >>>>> >>>>> Weewx should never crash per se. If it encounters an irrecpoverable >>>>> situation it should restart. If it is not restarting Tom would require, >>>>> I >>>>> am pretty sure, to see the log of the failure. The log should also give >>>>> you a clue as to the cause of the failure (if it is indeed weewx). >>>>> >>>>> A more likely cause would be flakey RPi power supply or flakey SD card >>>>> - both of which are pretty notorious issues when an RPi is running 24/7. >>>>> If you are also hosting the site on the RPi it is even possible that your >>>>> site is being hacked from outside and brought down!!! >>>>> >>>>> So there you have it, in a nutshell. Find the cause first then try >>>>> and find a solution!!! >>>>> >>>>> >>>>> >>>>> On Thursday, 28 February 2019 11:36:14 UTC+2, hind...@gmail.com wrote: >>>>>> >>>>>> I use weewx on a Raspberry pi and post my results to my own public >>>>>> weather station website (www.ashteadweather.com) with the excellent >>>>>> belchertown skin. It all works very nicely most of the time, but now >>>>>> and >>>>>> again, something goes wrong and the Raspberry pi crashes and weewx stops >>>>>> working - then my weather website shows out of date results until I >>>>>> notice >>>>>> this and restart the pi and weewx - then all fine again. Has anyone got >>>>>> any tips for tracking these problems proactively so as to minimise the >>>>>> downtime (rather than waiting until I happen to notice the problem) and >>>>>> perhaps getting weewx to show a holding message on the website until the >>>>>> problem is corrected? >>>>>> >>>>>> Thanks >>>>>> >>>>>> David. >>>>>> >>>>> -- >>>>> You received this message because you are subscribed to a topic in the >>>>> Google Groups "weewx-user" group. >>>>> To unsubscribe from this topic, visit >>>>> https://groups.google.com/d/topic/weewx-user/P7KTI7Xv1CQ/unsubscribe. >>>>> To unsubscribe from this group and all its topics, send an email to >>>>> weewx-user+...@googlegroups.com. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> -- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "weewx-user" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/weewx-user/P7KTI7Xv1CQ/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> weewx-user+...@googlegroups.com <javascript:>. >>> For more options, visit https://groups.google.com/d/optout. >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com <javascript:>. >> For more options, visit https://groups.google.com/d/optout. >> >
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
