so it continues always with the line Mar 6 14:08:13 *raspberrypi weewx[25014]: interceptor: MainThread: empty queue*
pi@raspberrypi:/etc/weewx $ *sudo tail -f /var/log/syslog* Mar 6 14:06:23 raspberrypi weewx[25014]: interceptor: MainThread: empty queue Mar 6 14:06:33 raspberrypi weewx[25014]: interceptor: MainThread: empty queue Mar 6 14:06:40 raspberrypi vncserver-x11[439,root]: HostedRendezvous: Connection to [mFRmAi-o5XJi-DFfFZP] is from user "<misko0...@gmail.com>" Mar 6 14:06:40 raspberrypi vncserver-x11[439,root]: Connections: connected: ---@gmail.com (via hc-2-gb-slg-1.services.vnc.com) Mar 6 14:06:40 raspberrypi vncserver-x11[439,root]: Connections: authenticated: ---@gmail.com (via hc-2-gb-slg-1.services.vnc.com), as pi (f permissions) Mar 6 14:06:41 raspberrypi vncserver-x11[439,root]: SPrintConnMgr: Failed to add printer: server-error-service-unavailable Mar 6 14:06:43 raspberrypi weewx[25014]: interceptor: MainThread: empty queue Mar 6 14:06:53 raspberrypi weewx[25014]: interceptor: MainThread: empty queue Mar 6 14:07:03 raspberrypi weewx[25014]: interceptor: MainThread: empty queue Mar 6 14:07:13 raspberrypi weewx[25014]: interceptor: MainThread: empty queue Mar 6 14:07:23 raspberrypi weewx[25014]: interceptor: MainThread: empty queue Mar 6 14:07:33 raspberrypi weewx[25014]: interceptor: MainThread: empty queue Mar 6 14:07:43 raspberrypi weewx[25014]: interceptor: MainThread: empty queue Mar 6 14:07:53 raspberrypi weewx[25014]: interceptor: MainThread: empty queue Mar 6 14:08:03 raspberrypi weewx[25014]: interceptor: MainThread: empty queue Mar 6 14:08:13 raspberrypi weewx[25014]: interceptor: MainThread: empty queue Mar 6 14:08:23 raspberrypi weewx[25014]: interceptor: MainThread: empty queue Mar 6 14:08:33 raspberrypi weewx[25014]: interceptor: MainThread: empty queue Mar 6 14:08:43 raspberrypi weewx[25014]: interceptor: MainThread: empty queue Mar 6 14:08:53 raspberrypi weewx[25014]: interceptor: MainThread: empty queue Mar 6 14:09:03 raspberrypi weewx[25014]: interceptor: MainThread: empty queue Mar 6 14:09:13 raspberrypi weewx[25014]: interceptor: MainThread: empty queue Mar 6 14:09:23 raspberrypi weewx[25014]: interceptor: MainThread: empty queue Mar 6 14:09:33 raspberrypi weewx[25014]: interceptor: MainThread: empty queue Mar 6 14:09:43 raspberrypi weewx[25014]: interceptor: MainThread: empty queue Mar 6 14:09:53 raspberrypi weewx[25014]: interceptor: MainThread: empty queue thank you, Michal Dňa streda, 6. marca 2019 11:26:39 UTC+1 Scott Grayban napísal(-a): > I need to see more of the log. Let it cycle a few times so I can see what > it's doing. > > On Wednesday, March 6, 2019 at 1:26:18 AM UTC-8, miso k wrote: >> >> thank you Scott, >> this is the result: >> >> pi@raspberrypi:/etc/weewx $ *sudo tail -f /var/log/syslog* >> Mar 6 10:22:42 raspberrypi weewx[25014]: engine: Finished loading >> service weewx.restx.StdAWEKAS >> Mar 6 10:22:42 raspberrypi weewx[25014]: engine: Loading service >> weewx.engine.StdPrint >> Mar 6 10:22:42 raspberrypi weewx[25014]: engine: Finished loading >> service weewx.engine.StdPrint >> Mar 6 10:22:42 raspberrypi weewx[25014]: engine: Loading service >> weewx.engine.StdReport >> Mar 6 10:22:42 raspberrypi weewx[25014]: engine: Finished loading >> service weewx.engine.StdReport >> Mar 6 10:22:42 raspberrypi weewx[25014]: engine: Starting up weewx >> version 3.9.1 >> Mar 6 10:22:42 raspberrypi weewx[25014]: engine: Station does not >> support reading the time >> Mar 6 10:22:42 raspberrypi weewx[25014]: engine: Starting main packet >> loop. >> Mar 6 10:22:52 raspberrypi weewx[25014]: interceptor: MainThread: empty >> queue >> >> >> My station does not have any open port. Is it OK to have it like this? >> >> device_type = observer >> mode = sniff >> iface = wlan0 >> pcap_filter = src 192.168.1.151 and dst port 80 >> >> >> Thanks, >> Michal >> >> >> Dňa pondelok, 4. marca 2019 20:46:36 UTC+1 Scott Grayban napísal(-a): >>> >>> Helps if you paste logs and set debug = 1 in the weewx.conf >>> >>> >>> On Monday, March 4, 2019 at 4:11:43 AM UTC-8, miso k wrote: >>>> >>>> Hello. >>>> >>>> I am trying to make the weewx to work with *Eurochron EFWS2900*, which >>>> is practically the same like *Fine Offset WH2900 / Ambient Weather >>>> WS-2902A. * >>>> I am using intercept driver, but I dont know if I have set it up >>>> correctly. The Webpage is not refreshing. >>>> >>>> this is beginning of my weewx.conf file: >>>> >>>> >>>> # This section is for information about the station. >>>> [Station] >>>> >>>> # Description of the station location >>>> location = "Trencianske Jastrabie, Hlboka ulica, 320mnm" >>>> >>>> # Latitude and longitude in decimal degrees >>>> latitude = 48.801 >>>> longitude = 18.103 >>>> >>>> # Altitude of the station, with unit it is in. This is downloaded >>>> from >>>> # from the station if the hardware supports it. >>>> altitude = 320, meter >>>> >>>> # Set to type of station hardware. There must be a corresponding >>>> stanza >>>> # in this file with a 'driver' parameter indicating the driver to >>>> be used. >>>> station_type = Interceptor >>>> >>>> # If you have a website, you may specify an URL >>>> #station_url = http://www.example.com >>>> >>>> # The start of the rain year (1=January; 10=October, etc.). This is >>>> # downloaded from the station if the hardware supports it. >>>> rain_year_start = 1 >>>> >>>> # Start of week (0=Monday, 6=Sunday) >>>> week_start = 0 >>>> >>>> ############################################################################## >>>> [Interceptor] >>>> # This section is for the network traffic interceptor driver. >>>> >>>> # The driver to use: >>>> driver = user.interceptor >>>> >>>> # Specify the hardware device to capture. Options include: >>>> # acurite-bridge - acurite internet bridge, smarthub, or access >>>> # observer - fine offset WH2600/HP1000/HP1003, ambient WS2902 >>>> # lw30x - oregon scientific LW301/LW302 >>>> # lacrosse-bridge - lacrosse GW1000U/C84612 internet bridge >>>> # wu-client - any hardware that uses the weather underground >>>> protocol >>>> device_type = observer >>>> mode = sniff >>>> iface = wlan0 >>>> pcap_filter = src 192.168.1.151 and dst port 80 >>>> # port = 8080 >>>> # address = 192.168.1.151 >>>> >>>> ############################################################################## >>>> [Simulator] >>>> # This section is for the weewx weather station simulator >>>> >>>> # The time (in seconds) between LOOP packets. >>>> loop_interval = 2.5 >>>> >>>> # The simulator mode can be either 'simulator' or 'generator'. >>>> # Real-time simulator. Sleep between each LOOP packet. >>>> mode = simulator >>>> # Generator. Emit LOOP packets as fast as possible (useful for >>>> testing). >>>> #mode = generator >>>> >>>> # The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the >>>> default >>>> # is to use the present time. >>>> #start = 2011-01-01T00:00 >>>> >>>> # The driver to use: >>>> driver = weewx.drivers.simulator >>>> >>>> >>>> What do I do wrong there? >>>> >>>> Thank you, >>>> Michal >>>> >>>> >>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.