Forgot to say the screenshot of the spectrum is one burst from the weather station at the lowest frequency range.
On Sunday, March 17, 2019 at 7:02:23 PM UTC, Phil Green wrote: > > Hi Luc, > Thanks for the prompt response. > Yes, I have now sorted the configuration of GO. > > However, I am still not receiving anything. > I will attach the command line capture of both no offset and +27000 offset > according to my device if I calibrate it will a known signal. > I have also attached a screenshot of the spectrum using an SDR program > with the +27kHz offset. > > Please advise on your suggestions. > > Thanks > Phil > > > On Sunday, March 17, 2019 at 5:21:22 PM UTC, Luc Heijst wrote: >> >> Hi Phil, >> >> My instructions are nor clear, sorry. >> Add the following 3 lines at the ens of your .profile file. >> export GOROOT=/usr/lib/go >> export GOPATH=$HOME/work >> export PATH=$PATH:$GOROOT/bin:$GOPATH/bin >> Then save the file. >> To activate the changes in the profile right away, type command: >> source ~/.profile >> >> The program doesn't run at its own on future restarts. >> I have set a cronjob for program weewx (with the weewx-rtld driver >> installed) which will start program rtldavis. >> >> crontab -e >> Add at the end: >> @reboot /home/weewx/util/init.d/weewx.debian restart >> >> The weewx-rtld driver can be found here: >> https://github.com/lheijst/weewx-rtld >> >> Beware: the first action is to get program rtldavis collecting the raw >> data. Without this raw data the weewx-rtld program is useless. >> >> After each successful data collection program rtldavis reports the >> frequency-offset between the RTL-SDR dongle and the Davis transmitter of >> that message. >> Program rtldavis has an option to preset an overall frequency correction: >> -fc xxx (in Hz) for all configured transmitters (often there is only one >> transmitter). >> >> Please report the output of program rtldavis to get more information what >> is happening. >> >> Luc >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.