Du kannst auch mal hier nach sehen und alles Abarbeiten.
http://wetterstation-gellershausen.de/wiki/doku.php?id=wetter:weewx_installation

Am Donnerstag, 23. Mai 2019 13:03:21 UTC+2 schrieb Kalli:
>
> Hallo
> ich betreibe die Selbe Station
>
> schau mal in deine weewx.conf   ob das so da drinne steht.
>
> [WH23xx]
>     # This section is for Fine Offset WH23xx stations
>     
>     # The model name such as Tycon, or TP2700
>     model = Tycon TP2700
>     
>     polling_mode = PERIODIC
>     
>     polling_interval = 60
>     
>     
>     # The driver to use
>     driver = user.wh23xx
>
>
> Am Mittwoch, 22. Mai 2019 12:15:38 UTC+2 schrieb Günther Wrana:
>>
>> Hallo
>>
>> Ich habe diese Wetterstation Renkforce WH2315
>>
>> Wenn jemand weis das diese Wetterstation mit weewx auf Lununtu oder 
>> Raspberry pi kompatibel ist da soll er mir sagen was ich falsch gemacht 
>> habe.
>>
>>
>>
>>
>> https://www.conrad.at/de/p/renkforce-wh2300-wh2315-funk-wetterstation-vorhersage-fuer-12-bis-24-stunden-1404262.html
>>
>> Das Programm weewx habe ich auf einem Laptop mit Lubuntu 16.04 und 
>> einem raspberry pi 3 v1.2 installiert.
>>
>> Ob das richtig installiert ist wies ich nicht aber es lässt sich starten 
>> und es startet.
>>
>> Die Wetterstation wird auch nach Eingabe von lsusb im Terminal angezeigt.
>>
>>
>> modelleisenbahn@modelleisenbahn-LIFEBOOK-E-Series:~$ lsusb
>> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 001 Device 004: ID 10c4:8468 Cygnal Integrated Products, Inc. 
>> Bus 001 Device 002: ID 0846:9030 NetGear, Inc. WNA1100 Wireless-N 150 
>> [Atheros AR9271]
>> Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> modelleisenbahn@modelleisenbahn-LIFEBOOK-E-Series:~$ 
>>
>>
>> Wenn ich dann weewx starte oder es schon gestartet ist wird folgendes 
>> angezeigt.
>>
>>
>> modelleisenbahn@modelleisenbahn-LIFEBOOK-E-Series:~$ sudo 
>> /etc/init.d/weewx start
>> [sudo] password for modelleisenbahn: 
>>  * Starting weewx weather system weewx                                  
>>  [ OK ] 
>> modelleisenbahn@modelleisenbahn-LIFEBOOK-E-Series:~$ sudo tail -f 
>> /var/log/syslog
>> May  5 11:24:55 modelleisenbahn-LIFEBOOK-E-Series weewx[2447]: engine: 
>> pid file is /var/run/weewx.pid
>> May  5 11:24:55 modelleisenbahn-LIFEBOOK-E-Series weewx[2451]: engine: 
>> Using configuration file /etc/weewx/weewx.conf
>> May  5 11:24:55 modelleisenbahn-LIFEBOOK-E-Series weewx[2451]: engine: 
>> Loading station type FineOffsetUSB (weewx.drivers.fousb)
>> May  5 11:24:55 modelleisenbahn-LIFEBOOK-E-Series weewx[2451]: fousb: 
>> driver version is 1.9
>> May  5 11:24:55 modelleisenbahn-LIFEBOOK-E-Series weewx[2451]: fousb: 
>> polling mode is PERIODIC
>> May  5 11:24:55 modelleisenbahn-LIFEBOOK-E-Series weewx[2451]: fousb: 
>> polling interval is 60
>> May  5 11:24:55 modelleisenbahn-LIFEBOOK-E-Series weewx[2451]: fousb: 
>> Cannot find USB device with Vendor=0x1941 ProdID=0x8021 Device=None
>> May  5 11:24:55 modelleisenbahn-LIFEBOOK-E-Series weewx[2451]: import of 
>> driver failed: Unable to find USB device (<class 'weewx.WeeWxIOError'>)
>> May  5 11:24:55 modelleisenbahn-LIFEBOOK-E-Series weewx[2451]: engine: 
>> Unable to load driver: Unable to find USB device
>> May  5 11:24:55 modelleisenbahn-LIFEBOOK-E-Series weewx[2451]:     ****  
>> Exiting...
>>
>>
>>
>> Nun habe ich in der weewx.conf etwas eingefügt wie in einer anderen Zeile 
>> beschrieben.
>>
>> weewx StdReport exits if USB disconnected
>>
>> # Keeping retrying!
>>
>> loop_on_init = 1
>>
>>
>> Danach wird im Terminal alle 60 Sekunden folgendes angezeigt.
>>
>>
>> Unable to load driver: Unable to find USB device
>>
>>
>> Zum Abschluss ist diese Wetterstation mit weewx auslesbar oder nicht wenn 
>> ja was habe ich bei der Installation oder beim einstellen falsch gemacht.
>>
>>
>> Grüße Günther
>>
>>
>>
>>
>>
>>
>>
>>  
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/d87d95c6-1258-4877-a038-c0dfe4f1a8b0%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to