Ok, I'm going with Patience Grasshopper.... I now have data LOL the only thing that changed, time.
On Tue, Jun 18, 2019 at 12:16 PM Jeremy Darling <jeremy.darl...@gmail.com> wrote: > From dmesg: > > [352095.739345] usb 2-1.8: new low-speed USB device number 11 using > ehci-pci > [352095.836292] usb 2-1.8: New USB device found, idVendor=24c0, > idProduct=0003 > [352095.836298] usb 2-1.8: New USB device strings: Mfr=0, Product=2, > SerialNumber=0 > [352095.836301] usb 2-1.8: Product: Chaney Instrument > [352105.839346] hid-generic 0003:24C0:0003.0067: usb_submit_urb(ctrl) > failed: -1 > [352105.839365] hid-generic 0003:24C0:0003.0067: timeout initializing > reports > [352105.839504] input: Chaney Instrument as > /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/0003:24C0:0003.0067/input/input117 > [352105.839746] hid-generic 0003:24C0:0003.0067: input,hidraw1: USB HID > v1.11 Device [Chaney Instrument] on usb-0000:00:1d.0-1.8/input0 > > From the syslog (yeah I forgot to capture it at the same as above, so > device numbers are different): > > Jun 18 12:09:51 elementary-red kernel: [352244.011592] usb 2-1.8: USB > disconnect, device number 11 > Jun 18 12:09:54 elementary-red kernel: [352247.279912] usb 2-1.8: new > low-speed USB device number 12 using ehci-pci > Jun 18 12:09:54 elementary-red kernel: [352247.376366] usb 2-1.8: New USB > device found, idVendor=24c0, idProduct=0003 > Jun 18 12:09:54 elementary-red kernel: [352247.376370] usb 2-1.8: New USB > device strings: Mfr=0, Product=2, SerialNumber=0 > Jun 18 12:09:54 elementary-red kernel: [352247.376380] usb 2-1.8: Product: > Chaney Instrument > Jun 18 12:10:04 elementary-red kernel: [352257.380014] hid-generic > 0003:24C0:0003.0068: usb_submit_urb(ctrl) failed: -1 > Jun 18 12:10:04 elementary-red kernel: [352257.380039] hid-generic > 0003:24C0:0003.0068: timeout initializing reports > Jun 18 12:10:04 elementary-red kernel: [352257.380158] input: Chaney > Instrument as > /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/0003:24C0:0003.0068/input/input118 > Jun 18 12:10:04 elementary-red kernel: [352257.380607] hid-generic > 0003:24C0:0003.0068: input,hidraw1: USB HID v1.11 Device [Chaney > Instrument] on usb-0000:00:1d.0-1.8/input0 > Jun 18 12:10:04 elementary-red mtp-probe: checking bus 2, device 12: > "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8" > Jun 18 12:10:04 elementary-red mtp-probe: bus: 2, device: 12 was not an > MTP device > Jun 18 12:10:06 elementary-red weewx[29825]: acurite: Failed attempt 2 of > 10 to get LOOP data: [Errno 110] Operation timed out > Jun 18 12:10:36 elementary-red weewx[29825]: acurite: R1: bad length: 00 00 > Jun 18 12:10:36 elementary-red weewx[29825]: cheetahgenerator: Generated 8 > files for report SeasonsReport in 0.19 seconds > Jun 18 12:10:37 elementary-red weewx[29825]: imagegenerator: Generated 14 > images for SeasonsReport in 0.11 seconds > Jun 18 12:10:37 elementary-red weewx[29825]: copygenerator: copied 5 files > to /var/www/html/weewx > Jun 18 12:10:54 elementary-red weewx[29825]: acurite: R1: ignoring stale > data (rssi indicates no communication from sensors): 01 c8 f7 78 00 39 09 > 47 00 00 > Jun 18 12:11:12 elementary-red weewx[29825]: acurite: R1: ignoring stale > data (rssi indicates no communication from sensors): 01 c8 f7 78 00 39 09 > 47 00 00 > Jun 18 12:11:30 elementary-red weewx[29825]: acurite: R1: ignoring stale > data (rssi indicates no communication from sensors): 01 c8 f7 78 00 39 09 > 47 00 00 > (^^over and over and over again) > > On Tue, Jun 18, 2019 at 11:58 AM vince <vinceska...@gmail.com> wrote: > >> On Tuesday, June 18, 2019 at 9:27:33 AM UTC-7, Jeremy Darling wrote: >>> >>> For a few split seconds I do see a hidraw1 but not long enough to get >>> anything off of it :( >>> >>> >>> >> When in doubt look at your /var/log directory and run the 'dmesg' command >> as well. >> You'll need to sudo to get root privs of course. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/86d0b88c-e96d-46ad-9226-f96f89b3eaad%40googlegroups.com >> <https://groups.google.com/d/msgid/weewx-user/86d0b88c-e96d-46ad-9226-f96f89b3eaad%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> For more options, visit https://groups.google.com/d/optout. >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAAhs7EjNyaRXz6-mAqKdCbGyZzewfC1yFu_1eNR-nb7RBNXodg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
