fantastic! so where should I end?
here?
https://github.com/weewx/weewx/wiki/hostapd-WiFi-setup-for-Interceptor-driver#edit-etcdhcpcdconfand-edit-the-first-4-lines-below-for-yournetwork-router-static-ip

Dňa nedeľa, 17. novembra 2019 16:19:46 UTC+1 G Hammer napísal(-a):
>
> If you are trying to use the custom server from a Fine Offset device you 
> don't need anything except to assign as static IP to your WeeWx machine.
> No AP, no DHCPD, just a static IP from your router.
>
> On Sunday, November 17, 2019 at 9:31:50 AM UTC-5, miso k wrote:
>>
>> going further:
>>
>> cant find /etc/dhcpd.config on my Pi
>>
>>
>> https://github.com/weewx/weewx/wiki/hostapd-WiFi-setup-for-Interceptor-driver#edit-etcdhcpcdconfand-edit-the-first-4-lines-below-for-yournetwork-router-static-ip
>>
>> Dňa nedeľa, 17. novembra 2019 15:18:33 UTC+1 miso k napísal(-a):
>>>
>>> Cant install it.
>>>
>>> during install I chose Simulator driver.
>>>
>>> then continued here:
>>>
>>> https://github.com/weewx/weewx/wiki/hostapd-WiFi-setup-for-Interceptor-driver
>>>
>>> after entering the second command
>>>
>>>> sudo wee_extension --install weewx-interceptor-master.zip
>>>
>>>
>>> i got this
>>>
>>>  sudo wee_extension --install weewx-interceptor-master.zip
>>>> Request to install 'weewx-interceptor-master.zip'
>>>> Traceback (most recent call last):
>>>>   File "/usr/bin/wee_extension", line 82, in <module>
>>>>     main()
>>>>   File "/usr/bin/wee_extension", line 74, in main
>>>>     ext.install_extension(options.install)
>>>>   File "/usr/share/weewx/weecfg/extension.py", line 125, in 
>>>> install_extension
>>>>     raise InstallError("Extension '%s' not found." % extension_path)
>>>> weecfg.extension.InstallError: Extension 'weewx-interceptor-master.zip' 
>>>> not found.
>>>
>>>
>>> :(
>>>
>>>
>>> Dňa štvrtok, 7. novembra 2019 11:57:37 UTC+1 Ingper napísal(-a):
>>>>
>>>> No change on anything else besides WS and R-Pi - if they are on the 
>>>> same local network. But you need of course to set a static IP (disable 
>>>> DHCP) on your R-pi so the WS have a known destination IP when uploading 
>>>> data.
>>>>
>>>> Den torsdag 7 november 2019 kl. 10:35:47 UTC+1 skrev miso k:
>>>>>
>>>>> thanks,
>>>>> is it all about weewx on rpi, or do I need to make some changes on 
>>>>> router/somewhere else too?
>>>>>
>>>>>
>>>>> Dňa piatok, 1. novembra 2019 7:47:34 UTC+1 Ingper napísal(-a):
>>>>>>
>>>>>> As you may have seen in my thread (linked above) it's possible to get 
>>>>>> it work, quite easy with "Ecowitt" protocol (but not WU) by using 
>>>>>> Interceptor. I think that is the easiest way, even though you don't want 
>>>>>> to 
>>>>>> use Interceptor driver...
>>>>>>
>>>>>> Den fredag 1 november 2019 kl. 06:44:50 UTC+1 skrev miso k:
>>>>>>>
>>>>>>> Nobody?
>>>>>>
>>>>>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/695998e9-cbfd-40f5-be7a-f75678a6e961%40googlegroups.com.

Reply via email to