If this is still a problem for you, then you need to add the name parameter. This will change the name in the MQTT payload and adjust the website values
For example [[[inputs]]] [[[[windSpeed]]]] name = windSpeed_kmh On Thursday, November 28, 2019 at 3:09:10 PM UTC-5, Kike .Asekas wrote: > > Sorry. I didn't see your message. It was that. I change MQTT inputs and > now the speed is in km/h althought it reports windSpeed_mps > {"noise_dB": "-29.591", "cloudbase_meter": "134.366868777", "outHumidity": > "96.0", "pressure_mbar": "1004.74", "maxSolarRad": "0.0", "barometer_mbar": > "1011.6171679", "rainRate_mm_per_hour": "0.0", "dewpoint_C": > "11.7795292565", "heatindex_C": "12.4", "dayRain_mm": "2.1", "battery": > "0.0", "altimeter_mbar": "1011.2607317", "windchill_C": "12.4", "snr_dB": > "29.476", "rain_total": "68.55", "appTemp_C": "12.4773944539", "outTemp_C": > "12.4", "humidex_C": "14.545643026", "hourRain_mm": "0.0", "windGust_mps": > "3.67200912966", "rssi_dB": "-0.115", "inTemp_C": "19.5", "usUnits": > "17.0", "rain_mm": "0.0", "rain24_mm": "3.9", "dateTime": "1574971656.0", > "windDir": "0.0", "windSpeed_mps": "2.44800608644"} > > El miércoles, 27 de noviembre de 2019, 20:12:17 (UTC+1), Greg Troxel > escribió: >> >> "Kike .Asekas" <enu...@gmail.com> writes: >> >> > I use MQTT y I have configure it with METRICWX. >> > [[MQTT]] >> > server_url = mqtt://broker.hivemq.com:1883 >> > topic = estacion/datos >> > unit_system = METRICWX >> > binding = loop >> > ... >> > When I load the page goes well, but at the time of updating the wind >> speed >> > appears in m / s. If I change the lines I told you multiplying x3.6 it >> goes >> > well. >> >> You can tell the mqtt publisher to set the units on each thing to >> publish. Probably you should just do that, even if in the background >> you try to investigate the defaults. >> >> For example, I have >> >> [[[inputs]]] >> [[[[barometer]]]] >> name = barometer_hPa >> units = hPa >> >> I am really not sure why I needed this, as I have group_pressure set to >> hPa as a default for all reports, but it was easy to set. >> >> > This is the output of MQTT. By the way, I don't understand how >> maxSolarRad >> > appears without having a solar sensor >> >> That does not make sense. Some stations pretend to measure solar >> radation from an illuminance sensor, but I don't even see that in your >> output. >> >> Also, since solar radiation is more or less always in W/m^2 (even in the >> US we do not use hp/ft^2), the value 7 does not really make sense unless >> right at dawn. Even a very dark day will see 50. >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/fe9a2d5d-298e-40ef-a1ff-86b2886b1c5a%40googlegroups.com.