Pi 4B Full Debian Buster OS load on clean SD Weewx 3.9.2-1 setup.py install VP2
Syslog excerpt in attached file; truncated: Starts from weewx restart, ends after several Wunderground RF reports (they continue as the *only* published records after setting debug to 1 (with debug = 3, the AWEKAS records *were* published)) Excerpt from weewx.conf: # This section is for general configuration information. # Set to 1 for extra debug info, otherwise comment it out or set to zero debug = 1 # Root directory of the weewx data file hierarchy for this station WEEWX_ROOT = /home/weewx # Whether to log successful operations log_success = True # Whether to log unsuccessful operations log_failure = True # How long to wait before timing out a socket (FTP, HTTP) connection socket_timeout = 20 # Do not modify this. It is used when installing and updating weewx. version = 3.9.2 [StdRESTful] [[StationRegistry]] # To register this weather station with weewx, set this to true register_this_station = true [[AWEKAS]] # This section is for configuring posts to AWEKAS. # If you wish to do this, set the option 'enable' to true, # and specify a username and password. # To guard against parsing errors, put the password in quotes. enable = true username = rcnzz password = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx [[CWOP]] # This section is for configuring posts to CWOP. # If you wish to do this, set the option 'enable' to true, # and specify the station ID (e.g., CW1234). enable = true station = EW2751 # If this is an APRS (radio amateur) station, uncomment # the following and replace with a passcode (e.g., 12345). #passcode = replace_me (APRS stations only) [[PWSweather]] # This section is for configuring posts to PWSweather.com. # If you wish to do this, set the option 'enable' to true, # and specify a station and password. # To guard against parsing errors, put the password in quotes. enable = true station = IAUCKLAN159 password = xxxxxxxxxxxxxxxxxxxxxx [[WeatherCloud]] id = 90734c166072f2eco key = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx [[WOW]] # This section is for configuring posts to WOW. # If you wish to do this, set the option 'enable' to true, # and specify a station and password. # To guard against parsing errors, put the password in quotes. enable = true station = 1b29c260-51e2-e911-b3ba-0003ff59b0d7 password = XXXXXXXXXXXXXXXXXXXXXXXXXXX [[Wunderground]] # This section is for configuring posts to the Weather Underground. # If you wish to do this, set the option 'enable' to true, # and specify a station (e.g., 'KORHOODR3') and password. # To guard against parsing errors, put the password in quotes. enable = true station = IAUCKLAN159 password = qxxxxxxxxxxxxxv # Set the following to True to have weewx use the WU "Rapidfire" # protocol. Not all hardware can support it. See the User's Guide. rapidfire = True ############################################################################## -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/f3d35d0d-39e5-4e60-969a-abd42e73b932%40googlegroups.com.
Group_Post_Weewx.info
Description: Binary data