Hi Thanks, I'll do further investigations. At least it's possible.
Gert On Monday, December 23, 2019 at 11:50:28 PM UTC+1, rich T wrote: > > I'm using a I2C BME280 Sensor and this driver > https://gitlab.com/wjcarpenter/bme280wx. > > On Monday, December 23, 2019 at 5:40:55 PM UTC-5, Gert Andersen wrote: >> >> Hi >> I'm running a configuration with the Ecowitt GW1000/Froggit DP1500(no >> console) and some senors (rain, wind temp, etc). Data from these sensors >> are received via the weewx SDR driver and rtl_433. So the GW1000 is not >> seen by the SDR system and therefore no pressure data are received. >> >> Question, it it possible to add a pressure sensor, which can be seen from >> the SDR driver or is there another solution. >> >> Thanks >> Gert >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/48f5c6d7-be64-4284-8ba0-7e73f58b2450%40googlegroups.com.