Hi,
The clue is in the config file comment for the altitude setting:
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
Your station supports a hardware altitude setting and that is likely overriding
your weewx.conf altitude setting. Did you set altitude in the console when you
setup your station? You can manually set the altitude through the console setup
routine (ie pushing buttons) or you can use the WeeWX wee_device utility
(http://weewx.com/docs/hardware.htm#vantage_notes). If you do use wee_device
make sure you stop WeeWX first.
Gary
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/bd0c3290-981b-4dfa-a5b9-586ea3f061b0%40googlegroups.com.
