Hello Sebastien, I have exactly the same problem as you... Connecting a Raspberry with my 6-1 Bresser via USB Do you have solve your problem ? Thank-you Sebastian !
Le dimanche 27 octobre 2019 18:45:31 UTC+1, Sebastien ROVERCH a écrit : > > > thank you for the answer. > > Do you have a brand to come out for the cable and for the USB HUB? > > Thanks > > Le vendredi 25 octobre 2019 23:47:14 UTC+2, mwall a écrit : >> >> what other devices are connected to the rpi? >> >> it looks like you are having usb connection problems. you should try the >> following: >> >> - connect the weather station to a powered usb hub instead of directly to >> the pi >> - do not connect any other device to the pi other than the weather station >> - be sure to use a quality usb cable to connect the weather station >> - try different operating system versions/releases on the rpi >> >> also, be sure to use PERIODIC mode, not ADAPTIVE mode in your >> configuration. see the weewx guide for more details: >> >> http://weewx.com/docs/hardware.htm#fousb_notes >> >> finally, i'm not certain that the console that comes with a bresser 6in1 >> is a fine-offset 1080 device. the vendor:product code for 1080 and 3080 >> devices is 1941:8021, and i see that in the lsusb output that you posted. >> but the pictures i've seen for bresser 6in1 have two different consoles, >> and neither one looks like a 1080/2080/3080 device. so i am a bit confused. >> >> could you post a picture of the console of your console? >> > > > >> >> m >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/548478d7-aa5f-43b8-9608-3a18b46f08c6%40googlegroups.com.
