Simon If you set debug = 1 in weewx.conf restart and then run sudo tail -f /var/log/syslog from the command line you should be able to see the loop data coming from your weather station in real time.
On Sat, 30 May 2020 at 08:57, steeple ian <steeple...@gmail.com> wrote: > Simon, > You are correct in your original assumption that w34realtime.txt is based > on the Cumulus realtime.txt specification. It has had few additional values > added but nothing to do with UV measurements. > > According to the Cumulus specification position 44 should be UVI but the > value you have there is clearly not. I used to have a similar device to you > which is a clone of Fine Offset, from memory it did not actually measure UV > directly but was a derived value. I always used to use the HP1000 driver > from Aussie Susan and cannot recall having any issues with that. > > One quick check you could make which would eliminate any issue caused by > weather34.py is to disable weather34.py and install the crt.py and check > the realtime.txt out put from that. If you still have the same issue, I > would look at the driver you are using. > > Ian > > On Fri, 29 May 2020 at 13:04, 'Simon Davies' via weewx-user < > weewx-user@googlegroups.com> wrote: > >> Weather34 is displaying the Solar radiation reading instead of the UV >> index. Any idea how to correct this? >> >> I've installed this version a few weeks ago and its been a problem since >> then. WX-HC20-IHVN-1.0.0 WeeWX-(4.0.0) Ambient Weather WS-1000 >> http://cawston.weather-station.co.uk/ >> >> w34realtime.txt : 29/05/20 12:12:34 22.0 33 5.0 0.5 0.2 77 0.0 0.0 1015.5 >> ENE 0 m/s C mb mm 9.3 -0.7 0.0 109.2 0.0 25.3 23 22.0 3.8 22.0 12:11 11.0 >> 05:35 2.0 11:21 4.4 09:49 1017.9 00:10 1015.2 11:36 4.0.0 0 3.3 22.0 NULL >> 3054.0 NULL 630 188 0.0 0 1 0 S NULL m NULL 7.4 NULL 0 >> >> 44th value is 3054.0 and is displayed as the UVI. >> >> I don't have a definition for the w34realtime.txt, >> https://cumuluswiki.org/a/Realtime.txt has the definition for >> "realtime.txt", i'm unsure is this is the same. >> >> If the definition is correct then it looks like my solar radiation is in >> the wrong place. Any idea how to fix. >> >> weewx config: >> >> [Weather34RealTime] >> binding = loop >> exclude_fields = rain >> filename = /var/www/html/weewx/weather34/w34realtime.txt >> unit_system = METRICWX >> "# cache_enable" = False >> cache_stale_time = 900 >> cache_directory = /tmp >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/da42a7a6-caeb-4d5f-a452-025ee9222afc%40googlegroups.com >> <https://groups.google.com/d/msgid/weewx-user/da42a7a6-caeb-4d5f-a452-025ee9222afc%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CADASSaRYywBaTWQAjzy%2BnUKi9ZzMSg%3D%3DWqCfoecnU8u1gAdedw%40mail.gmail.com.