I discovered that using the python install method, which I have to use for Manjaro, does not include the python serial module. It was in the repository, and once I installed it, weewx downloaded data in terminal. Now that I have the data, how do I see graphs and charts. Does that require an extension or is there something else I need to install? Thanks. I will research this to see if I can figure it out, but any advice is welcome.
On Tuesday, June 9, 2020 at 2:31:29 PM UTC-4, Henri Emurian wrote: > > I am new to Linux and recently installed Manjaro. My old operating system > is Windows 7. I have a Vantage Pro 2 station which is connected via USB. On > Windows 7 I used the WeatherLink software from Davis. That gave me my data > by clicking the executable. > I read the user guide for Weewx and installed it using the Python utility > Setup.py. The install seemed to go well, although I was not sure which port > to choose (I chose the default ttyUSB0). No error messages came up. > To run the program directly, I use cd /home/weewx, then sudo ./bin/weewxd. > When I execute this command, nothing happens. The cursor just goes to the > command line. There is no indication that data is being downloaded from the > station. My question is, how do I know whether data is being downloaded, > and how do I see my data, charts, etc? I have read the user manual and > found nothing which would help. TIA for any assistance. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/c750b329-97da-4004-82d9-e667c3284091o%40googlegroups.com.