Sure sounds to me like a problem with your ISS, or, possibly, the link between the ISS and console. I would give Davis a call.
On Mon, Jul 13, 2020 at 10:53 PM peter <peter...@gmail.com> wrote: > I still had no chance to see the console whether it reports the solar > value or not. I have few observations that may help. I'd really appreciate > advice what may be causing this. > > 1. Davis' datalogger is set to 1-minute interval. I stopped the weewx for > 10 minutes and then restarted. Upon start it went back 10 minutes and > logged the data. My assumption was: if Davis works OK, weewx will get all > values (including solar) from the datalogger. But it did not. No solar in > the past 10 minutes. > 2. I stopped the weewx, stopped the Davis datalogger, cleared the > datalogger's memory, started the datalogger and then weewx. Solar was > there! For one day. Then it stopped logging it. > 3. After point (2), I left it running and the solar came back sometime > next day, then disappeared, etc. No intervention from me. > 4. *Important:* When the solar value disappears, the wind values are > definitely *wrong*. If I'm not mistaken, weewx picks up the maximum gust > & average in the last minute (I have it set to 1 minute interval). But I > think it just picks up some value that is on line at the moment of reading. > Not the minute-generated values by the console. This is clearly seen in the > wind plots. But not in temperature because temperature is not as dynamic > value as the wind is. > 5. On another faulty occasion, clearing the datalogger's memory didn't > help. So it is not really a workaround or solution to the problem. > > I haven't installed the RTC chip yet but I highly doubt the time is the > issue. Time reading has been very stable comparing to my laptop and other > RPis I have installed around. I've installed an NTP as well. > Is it possible the Davis' datalogger is the issue here? Had anyone > experienced a similar observation or Davis hardware failure? I know I need > to see the console in person but right now this is not possible. At least > for a month. > > > Dne nedelja, 21. junij 2020 23.04.44 UTC+2 je oseba Tom Keffer napisala: >> >> See the section *Running directly >> <http://www.weewx.com/docs/usersguide.htm#Running_directly>* in the >> User's Guide. Be sure to stop weewx first. >> >> On Sun, Jun 21, 2020 at 1:55 PM peter <pete...@gmail.com> wrote: >> >>> >>>> >>>> Is a value for solar radiation appearing on the console? >>>> >>>> I don't know, sorry. The setup is located at a remote location. I'll >>> try and find out once it happens again. >>> >>> If you run weewxd directly from the command line, does it show a value >>>> for radiation? >>>> >>> >>> I haven't tried this yet. I guess the run command is provided with >>> instructions but if you could just post the command, that would help. >>> >>> Thanks. >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to weewx...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/7a3d85f5-5899-486d-92ed-591df7b0c275o%40googlegroups.com >>> <https://groups.google.com/d/msgid/weewx-user/7a3d85f5-5899-486d-92ed-591df7b0c275o%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/0522ee7e-b63b-4e63-af55-6eee97668946o%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/0522ee7e-b63b-4e63-af55-6eee97668946o%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAPq0zECj-ybz7VnWf%2Ba3y_Nb7V9BcorfvtwpGgwciL4GGULWYQ%40mail.gmail.com.
