If you really want them split, try this?
station_observations = "barometer", "dewpoint", "outHumidity", "dayRain",
"rainRate"
Anything in the MQTT packet should be viewable. rainWithRainRate is a
special one that combines 2 observations into 1 line.
On Tuesday, July 14, 2020 at 12:23:16 PM UTC-4, Pat wrote:
>
> Remove rainTotal, that was my mistake. I confused the chart for the
> station_observations.
>
> Right now rainWithRainRate is the only one that will show you the rain
> total for the day using the dayRain observation.
>
>
>
> On Tuesday, July 14, 2020 at 12:19:34 PM UTC-4, Didier Decoodt wrote:
>>
>> I do that and I display: station_observations = "barometer", "dewpoint",
>> "outHumidity", "rainWithRainRate", "rainTotal", "rain", "rainRate"
>> I don't understand rainTotal (invalid observation) and rain (0,1 mm)
>>
>> Le mar. 14 juil. 2020 à 18:10, Pat <p...@obrienphoto.net> a écrit :
>>
>>> You'll also need to update rain, rainRate too for mm
>>>
>>> [[[inputs]]]
>>> [[[[dayRain]]]]
>>> name = dayRain_mm
>>> units = mm
>>> [[[[rainRate]]]]
>>> name = rainRate_mm_per_hour
>>> units = mm_per_hour
>>> [[[[rain]]]]
>>> name = rain_mm
>>> units = mm
>>>
>>>
>>>
>>> On Tuesday, July 14, 2020 at 12:01:45 PM UTC-4, Pat wrote:
>>>>
>>>> You're MQTT is sending rain information in CM. Do you want it in CM or
>>>> MM?
>>>>
>>>> Looking at the code, you'll want rainWithRainRate to show the dayRain
>>>> observation.
>>>>
>>>> If you want this in MM, you need to update your weewx.conf [[MQTT]]
>>>> section to send data in MM.
>>>>
>>>> [[MQTT]]
>>>> [[[inputs]]]
>>>> [[[[dayRain]]]]
>>>> name = dayRain_mm
>>>> units = mm
>>>>
>>>>
>>>> MQTT: {"dateTime": "1594742272.0", "outTemp_C": "21.333333333333336",
>>>> "outHumidity": "64.9", "dewpoint_C": "14.444444444444445", "heatindex_C":
>>>> "21.166666666666664", "windchill_C": "21.333333333333336",
>>>> "windSpeed_kph":
>>>> "1.7059046400000002", "windDir": "360.0", "windGust_kph":
>>>> "3.4118092800000004", "windGustDir": "6.0", "barometer_mbar":
>>>> "1015.7471282370167", "pressure_mbar": "998.4088208638761", "rain_cm":
>>>> "0.0", "rainRate_cm_per_hour": "0.0", "inTemp_C": "25.944444444444443",
>>>> "inHumidity": "42.6", "inDewpoint_C": "12.277777777777779", "usUnits":
>>>> "16.0", "altimeter_mbar": "1016.4348448211537", "appTemp_C":
>>>> "22.423477298218454", "beaufort_count": "0.0", "cloudbase_meter":
>>>> "988.6539444933627", "humidex_C": "24.96873770987386", "maxSolarRad_Wpm2":
>>>> "531.7266550230675", "hourRain_cm": "0.0", "rain24_cm": "0.0600000324",
>>>> "dayRain_cm":
>>>> "0.0600000324"}
>>>>
>>>>
>>>> On Tuesday, July 14, 2020 at 11:56:45 AM UTC-4, Didier Decoodt wrote:
>>>>>
>>>>> meteo-auffargis.decoodt.eu
>>>>>
>>>>> Le mar. 14 juil. 2020 à 17:56, Pat <p...@obrienphoto.net> a écrit :
>>>>>
>>>>>> What is the link to your site? I'll take a look at it through your
>>>>>> debug
>>>>>>
>>>>>> On Tuesday, July 14, 2020 at 11:55:18 AM UTC-4, Didier Decoodt wrote:
>>>>>>>
>>>>>>> How do you do that?
>>>>>>>
>>>>>>>
>>>>>>> Le mar. 14 juil. 2020 à 17:50, Pat <p...@obrienphoto.net> a écrit :
>>>>>>>
>>>>>>>> What does your mqtt say for rain or day rain?
>>>>>>>>
>>>>>>>> On Tuesday, July 14, 2020 at 11:40:57 AM UTC-4, Didier Decoodt
>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>> I verify rainTotal in graphs.conf, it's OK 0,6 mm
>>>>>>>>>
>>>>>>>>> Le mar. 14 juil. 2020 à 17:33, Didier Decoodt <didier...@gmail.com>
>>>>>>>>> a écrit :
>>>>>>>>>
>>>>>>>>>> I try rainTotal and rainRate ==> Invalid observation
>>>>>>>>>> I try rainWithRainRate ==> always 0,1mm (instead of 0,6)
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Le mar. 14 juil. 2020 à 17:23, Pat <p...@obrienphoto.net> a
>>>>>>>>>> écrit :
>>>>>>>>>>
>>>>>>>>>>> Or if you want them separated, try
>>>>>>>>>>>
>>>>>>>>>>> station_observations = "barometer", "dewpoint",
>>>>>>>>>>> "outHumidity", "rainTotal", "rainRate"
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> "rain" will show you just the last rain value from mqtt, if you
>>>>>>>>>>> want the total you'll need to try rainTotal or rainWithRainRate
>>>>>>>>>>>
>>>>>>>>>>> On Tuesday, July 14, 2020 at 11:21:40 AM UTC-4, Pat wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> I think you'll want this
>>>>>>>>>>>>
>>>>>>>>>>>> station_observations = "barometer", "dewpoint",
>>>>>>>>>>>> "outHumidity", "rainWithRainRate"
>>>>>>>>>>>>
>>>>>>>>>>>> Save and restart weewx
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Tuesday, July 14, 2020 at 11:18:11 AM UTC-4, Didier Decoodt
>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> Ah... this is for today (missunderstanding)
>>>>>>>>>>>>> But today I have 3*0.2=0.6 mm
>>>>>>>>>>>>>
>>>>>>>>>>>>> # Station Observations. Special observation
>>>>>>>>>>>>> rainWithRainRate combines Daily Rain with Rain Rate in 1 line
>>>>>>>>>>>>> station_observations = barometer, dewpoint,
>>>>>>>>>>>>> outHumidity, rain, rainRate
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Le mar. 14 juil. 2020 à 17:12, Pat <p...@obrienphoto.net> a
>>>>>>>>>>>>> écrit :
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Why is this a problem?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> You've had 0,1mm of rain today right?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> This shows the rain you've had for today.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> What do you have for your station_observations setting?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Tuesday, July 14, 2020 at 10:58:30 AM UTC-4, Didier
>>>>>>>>>>>>>> Decoodt wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> OK
>>>>>>>>>>>>>>> But now it is 5 PM, and the last rainfall was at 11 AM this
>>>>>>>>>>>>>>> morning, and I see 0,1 mm.
>>>>>>>>>>>>>>> This is a problem...
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Le mar. 14 juil. 2020 à 16:49, Pat <p...@obrienphoto.net> a
>>>>>>>>>>>>>>> écrit :
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> When the page is first loaded, it loads the information
>>>>>>>>>>>>>>>> from the database. After MQTT connects, it then updates from
>>>>>>>>>>>>>>>> any
>>>>>>>>>>>>>>>> information in MQTT.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Sometimes MQTT is more updated than the databased depending
>>>>>>>>>>>>>>>> on the time of your archives. timing of loop, etc.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Tuesday, July 14, 2020 at 6:19:38 AM UTC-4,
>>>>>>>>>>>>>>>> didier....@gmail.com wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hi
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I don't understand why I have a rain = 0,1 mm while it
>>>>>>>>>>>>>>>>> hasn't been raining for 1/4 h
>>>>>>>>>>>>>>>>> (RainRate seems to be correct during this period)
>>>>>>>>>>>>>>>>> When I press F5 to refresh the screen, it appears very
>>>>>>>>>>>>>>>>> shortly 0 mm, then 0,1 mm
>>>>>>>>>>>>>>>>> Do you have an explaination?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hereafter the "ip"/v1/current_conditions
>>>>>>>>>>>>>>>>> {"data":{"did":"001D0A711DF5","ts":1594720938,"conditions":[{"lsid":319839,"data_structure_type":1,"txid":1,"temp":
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> 59.6,"hum":83.3,"dew_point": 54.5,"wet_bulb":
>>>>>>>>>>>>>>>>> 56.3,"heat_index":
>>>>>>>>>>>>>>>>> 59.6,"wind_chill": 59.6,"thw_index":
>>>>>>>>>>>>>>>>> 59.6,"thsw_index":null,"wind_speed_last":0.93,"wind_dir_last":300,"wind_speed_avg_last_1_min":0.93,"wind_dir_scalar_avg_last_1_min":260,"wind_speed_avg_last_2_min":0.62,"wind_dir_scalar_avg_last_2_min":266,"wind_speed_hi_last_2_min":3.43,"wind_dir_at_hi_speed_last_2_min":300,"wind_speed_avg_last_10_min":0.93,"wind_dir_scalar_avg_last_10_min":242,"wind_speed_hi_last_10_min":4.25,"wind_dir_at_hi_speed_last_10_min":15,"rain_size":2,"rain_rate_last":0,"rain_rate_hi":0,"rainfall_last_15_min":0,"rain_rate_hi_last_15_min":0,"rainfall_last_60_min":3,"rainfall_last_24_hr":3,"rain_storm":3,"rain_storm_start_at":1594717981,"solar_rad":null,"uv_index":null,"rx_state":0,"trans_battery_flag":0,"rainfall_daily":3,"rainfall_monthly":8,"rainfall_year":60,"rain_storm_last":5,"rain_storm_last_start_at":1593604621,"rain_storm_last_end_at":1593702061},{"lsid":319838,"data_structure_type":4,"temp_in":
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> 77.8,"hum_in":40.6,"dew_point_in": 52.0,"heat_index_in":
>>>>>>>>>>>>>>>>> 76.9},{"lsid":319837,"data_structure_type":3,"bar_sea_level":30.074,"bar_trend":-0.002,"bar_absolute":29.561}]},"error":null}
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails
>>>>>>>>>>>>>>>> from it, send an email to weewx...@googlegroups.com.
>>>>>>>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/e1dadaa1-f15f-41c4-8c32-702d4625b030o%40googlegroups.com
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/e1dadaa1-f15f-41c4-8c32-702d4625b030o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>>>>>>> .
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from
>>>>>>>>>>>>>> it, send an email to weewx...@googlegroups.com.
>>>>>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/551c2bc9-d1f5-4fde-8d55-2b1e11fa8828o%40googlegroups.com
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/551c2bc9-d1f5-4fde-8d55-2b1e11fa8828o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>>>>> .
>>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from
>>>>>>>>>>> it, send an email to weewx...@googlegroups.com.
>>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/94cbf91b-12c5-4ad5-aea1-7b9f149d5fc0o%40googlegroups.com
>>>>>>>>>>>
>>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/94cbf91b-12c5-4ad5-aea1-7b9f149d5fc0o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>>> .
>>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>> Groups "weewx-user" group.
>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>> send an email to weewx...@googlegroups.com.
>>>>>>>> To view this discussion on the web visit
>>>>>>>> https://groups.google.com/d/msgid/weewx-user/fff2dd6b-b562-43ab-8a3b-5d9f902b90f2o%40googlegroups.com
>>>>>>>>
>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/fff2dd6b-b562-43ab-8a3b-5d9f902b90f2o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>> .
>>>>>>>>
>>>>>>> --
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "weewx-user" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>> send an email to weewx...@googlegroups.com.
>>>>>> To view this discussion on the web visit
>>>>>> https://groups.google.com/d/msgid/weewx-user/62e69db0-dfaf-4609-8d52-4ca6e5698551o%40googlegroups.com
>>>>>>
>>>>>> <https://groups.google.com/d/msgid/weewx-user/62e69db0-dfaf-4609-8d52-4ca6e5698551o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>> .
>>>>>>
>>>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to weewx...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/weewx-user/ad7b0cf0-f128-4434-ab19-4576ae30c133o%40googlegroups.com
>>>
>>> <https://groups.google.com/d/msgid/weewx-user/ad7b0cf0-f128-4434-ab19-4576ae30c133o%40googlegroups.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/65968db5-aec3-4db1-ace4-b94f239e733co%40googlegroups.com.
