RE: [weewx-user] Re: Module Error

steepleian Wed, 12 Aug 2020 08:06:46 -0700

Ok carry on with the other troubleshooting stages.

Sent from Mail for Windows 10

From: Mauro De Lauretis
Sent: 12 August 2020 16:03
To: weewx-user
Subject: Re: [weewx-user] Re: Module Error

Changed into this:

[StdReport]

# Where the skins reside, relative to WEEWX_ROOT

SKIN_ROOT = skins

# Where the generated reports should go, relative to WEEWX_ROOT

HTML_ROOT = /var/www/html/weewx

# The database binding indicates which data should be used in reports.

data_binding = wx_binding

No changes, still the same problem:

root@raspberrypi:/var/www/html/weewx/weather34/w34highcharts# sudo python3 wee_reports_w34

Traceback (most recent call last):

File "wee_reports_w34", line 8, in <module>

import weewx

ModuleNotFoundError: No module named 'weewx'

Il giorno mercoledì 12 agosto 2020 alle 16:46:18 UTC+2 steep...@gmail.com ha scritto:

Hi Mauro,

You need to change HTML_ROOT in StdReport stanza to HTML_ROOT = /var/www/html/weewx

and restart WeeWX

Wait for the next report cycle and I think things will improve.

Ian

On Wed, 12 Aug 2020 at 15:32, Mauro De Lauretis <mauro.de...@gmail.com> wrote:
Using verbosity=1, displaying most info

wee_debug output will be sent to stdout(console)

Using configuration file /home/weewx/weewx.conf
Using database binding 'wx_binding', which is bound to database 'archive_sqlite'

System info
Platform: Linux-5.4.51+-armv6l-with-debian-10.4
Python Version: 3.7.3

Load Information
1 minute load average: 0.46
5 minute load average: 0.46
15 minute load average: 0.45

General Weewx info
Weewx version 4.1.1 detected.

Station info
Station type: Vantage
Driver: weewx.drivers.vantage

Driver info
[Vantage]
# This section is for the Davis Vantage series of weather stations.

# Connection type: serial or ethernet
# serial (the classic VantagePro)
# ethernet (the WeatherLinkIP or Serial-Ethernet bridge)
type = serial

# If the connection type is serial, a port must be specified:
# Debian, Ubuntu, Redhat, Fedora, and SuSE:
# /dev/ttyUSB0 is a common USB port name
# /dev/ttyS0 is a common serial port name
# BSD:
# /dev/cuaU0 is a common serial port name
port = /dev/ttyUSB0

# If the connection type is ethernet, an IP Address/hostname is required:
host = 1.2.3.4

######################################################
# The rest of this section rarely needs any attention.
# You can safely leave it "as is."
######################################################

# Serial baud rate (usually 19200)
baudrate = 19200

# TCP port (when using the WeatherLinkIP)
tcp_port = 22222

# TCP send delay (when using the WeatherLinkIP):
tcp_send_delay = 0.5

# The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both
loop_request = 1

# The id of your ISS station (usually 1). If you use a wind meter connected
# to a anemometer transmitter kit, use its id
iss_id = 1

# How long to wait for a response from the station before giving up (in
# seconds; must be greater than 2)
timeout = 4

# How long to wait before trying again (in seconds)
wait_before_retry = 1.2

# How many times to try before giving up:
max_tries = 4

# Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2
model_type = 2

# The driver to use:
driver = weewx.drivers.vantage

Currently installed extensions
No extensions installed

Archive info
Database name: weewx.sdb
Table name: archive
Version 2.0
Unit system: 16 (METRIC)
First good timestamp: 2020-08-03 14:10:00 CEST (1596456600)
Last good timestamp: 2020-08-12 16:25:00 CEST (1597242300)
Number of records: 2613
weewx (weewx.conf) is set to use an archive interval of 300 seconds.
The station hardware was not interrogated in determining archive interval.

Databases configured in weewx.conf
Database name: weewx.sdb
Database driver: weedb.sqlite

Database name: weewx
Database driver: weedb.mysql
Database host: localhost

Parsed and obfuscated weewx.conf
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2019 Tom Keffer <tke...@gmail.com>
# See the file LICENSE.txt for your rights.

##############################################################################

# This section is for general configuration information.

# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 1

# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /home/weewx

# Whether to log successful operations
log_success = True

# Whether to log unsuccessful operations
log_failure = True

# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20

# Do not modify this. It is used when installing and updating weewx.
version = 4.1.1

##############################################################################

# This section is for information about the station.

[Station]

# Description of the station location
location = "Pineto, Teramo"

# Latitude in decimal degrees. Negative for southern hemisphere
latitude = 42.634585
# Longitude in decimal degrees. Negative for western hemisphere.
longitude = 14.040554

# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 40, meter # Choose 'foot' or 'meter' for unit

# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be used.
station_type = Vantage

# If you have a website, you may specify an URL
station_url = XXX obfuscated by wee_debug XXX

# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1

# Start of week (0=Monday, 6=Sunday)
week_start = 0

##############################################################################

[Vantage]
# This section is for the Davis Vantage series of weather stations.

# Connection type: serial or ethernet
# serial (the classic VantagePro)
# ethernet (the WeatherLinkIP or Serial-Ethernet bridge)
type = serial

# If the connection type is serial, a port must be specified:
# Debian, Ubuntu, Redhat, Fedora, and SuSE:
# /dev/ttyUSB0 is a common USB port name
# /dev/ttyS0 is a common serial port name
# BSD:
# /dev/cuaU0 is a common serial port name
port = /dev/ttyUSB0

# If the connection type is ethernet, an IP Address/hostname is required:
host = 1.2.3.4

######################################################
# The rest of this section rarely needs any attention.
# You can safely leave it "as is."
######################################################

# Serial baud rate (usually 19200)
baudrate = 19200

# TCP port (when using the WeatherLinkIP)
tcp_port = 22222

# TCP send delay (when using the WeatherLinkIP):
tcp_send_delay = 0.5

# The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both
loop_request = 1

# The id of your ISS station (usually 1). If you use a wind meter connected
# to a anemometer transmitter kit, use its id
iss_id = 1

# How long to wait for a response from the station before giving up (in
# seconds; must be greater than 2)
timeout = 4

# How long to wait before trying again (in seconds)
wait_before_retry = 1.2

# How many times to try before giving up:
max_tries = 4

# Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2
model_type = 2

# The driver to use:
driver = weewx.drivers.vantage

##############################################################################

# This section is for uploading data to Internet sites

[StdRESTful]

[[StationRegistry]]
# To register this weather station with weewx, set this to true
register_this_station = true

[[AWEKAS]]
# This section is for configuring posts to AWEKAS.

# If you wish to do this, set the option 'enable' to true,
# and specify a username and password.
# To guard against parsing errors, put the password in quotes.
enable = false
username = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX

[[CWOP]]
# This section is for configuring posts to CWOP.

# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = false
station = XXX obfuscated by wee_debug XXX

# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
#passcode = replace_me (APRS stations only)

[[PWSweather]]
# This section is for configuring posts to PWSweather.com.

# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX

[[WOW]]
# This section is for configuring posts to WOW.

# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX

[[Wunderground]]
# This section is for configuring posts to the Weather Underground.

# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX

# If you plan on using wunderfixer, set the following
# to your API key:
api_key = XXX obfuscated by wee_debug XXX

# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False

##############################################################################

# This section specifies what reports, using which skins, to generate.

[StdReport]

# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = skins

# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = public_html

# The database binding indicates which data should be used in reports.
data_binding = wx_binding

# Whether to log a successful operation
log_success = True

# Whether to log an unsuccessful operation
log_failure = False

# Each of the following subsections defines a report that will be run.
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.

[[SeasonsReport]]
# The SeasonsReport uses the 'Seasons' skin, which contains the
# images, templates and plots for the report.
skin = Seasons
enable = false

[[SmartphoneReport]]
# The SmartphoneReport uses the 'Smartphone' skin, and the images and
# files are placed in a dedicated subdirectory.
skin = Smartphone
enable = false
HTML_ROOT = public_html/smartphone

[[MobileReport]]
# The MobileReport uses the 'Mobile' skin, and the images and files
# are placed in a dedicated subdirectory.
skin = Mobile
enable = false
HTML_ROOT = public_html/mobile

[[StandardReport]]
# This is the old "Standard" skin. By default, it is not enabled.
skin = Standard
enable = false

[[FTP]]
# FTP'ing the results to a webserver is treated as just another report,
# albeit one with an unusual report generator!
skin = Ftp

# If you wish to use FTP, set "enable" to "true", then
# fill out the next four lines.
# Use quotes around passwords to guard against parsing errors.
enable = false
user = XXX obfuscated by wee_debug XXX
password = XXX obfuscated by wee_debug XXX
server = replace_me # The ftp server name, e.g, www.myserver.org
path = replace_me # The destination directory, e.g., /weather

# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False

# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = public_html

# Most FTP servers use port 21
port = 21

# Set to 1 to use passive mode, zero for active mode
passive = 1

[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync

# If you wish to use rsync, you must configure passwordless ssh using
# public/private key authentication from the user account that weewx
# runs to the user account on the remote machine where the files
# will be copied.
#
# If you wish to use rsync, set "enable" to "true", then
# fill out server, user, and path.
# The server should appear in your .ssh/config file.
# The user is the username used in the identity file.
# The path is the destination directory, such as /var/www/html/weather.
# Be sure that the user has write permissions on the destination!
enable = false
server = replace_me
user = XXX obfuscated by wee_debug XXX
path = replace_me

# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = public_html

# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote file
# deletion, zero to allow files to accumulate remotely.
delete = 0

####

# Various options for customizing your reports.

[[Defaults]]

[[[Units]]]

# The following section sets what unit to use for each unit group.
# NB: The unit is always in the singular. I.e., 'mile_per_hour',
# NOT 'miles_per_hour'
[[[[Groups]]]]

group_altitude = meter # Options are 'foot' or 'meter'
group_degree_day = degree_C_day # Options are 'degree_F_day' or 'degree_C_day'
group_distance = km # Options are 'mile' or 'km'
group_pressure = mbar # Options are 'inHg', 'mmHg', 'mbar', or 'hPa'
group_rain = mm # Options are 'inch', 'cm', or 'mm'
group_rainrate = mm_per_hour # Options are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
group_speed = meter_per_second # Options are 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second'
group_speed2 = meter_per_second2 # Options are 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2'
group_temperature = degree_C # Options are 'degree_F' or 'degree_C'

# The following section sets the formatting for each type of unit.
[[[[StringFormats]]]]

centibar = %.0f
cm = %.2f
cm_per_hour = %.2f
degree_C = %.1f
degree_F = %.1f
degree_compass = %.0f
foot = %.0f
hPa = %.1f
hour = %.1f
inHg = %.3f
inch = %.2f
inch_per_hour = %.2f
km = %.1f
km_per_hour = %.0f
km_per_hour2 = %.1f
knot = %.0f
knot2 = %.1f
mbar = %.1f
meter = %.0f
meter_per_second = %.1f
meter_per_second2 = %.1f
mile = %.1f
mile_per_hour = %.0f
mile_per_hour2 = %.1f
mm = %.1f
mmHg = %.1f
mm_per_hour = %.1f
percent = %.0f
second = %.0f
uv_index = %.1f
volt = %.1f
watt_per_meter_squared = %.0f
NONE = " N/A"

# The following section overrides the label used for each type of unit
[[[[Labels]]]]

meter = " meter", " meters" # You may prefer "metre".
day = " day", " days"
hour = " hour", " hours"
minute = " minute", " minutes"
second = " second", " seconds"
NONE = ""

# The following section sets the format for each time scale.
# The values below will work in every locale, but they may not look
# particularly attractive.
[[[[TimeFormats]]]]

hour = %H:%M
day = %X
week = %X (%A)
month = %x %X
year = %x %X
rainyear = %x %X
current = %x %X
ephem_day = %X
ephem_year = %x %X

[[[[Ordinates]]]]

# Ordinal directions. The last one is for no wind direction
directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW, WSW, W, WNW, NW, NNW, N/A

# The following section sets the base temperatures used for the
# calculation of heating, cooling, and growing degree-days.
[[[[DegreeDays]]]]

# Base temperature for heating days, with unit:
heating_base = 65, degree_F
# Base temperature for cooling days, with unit:
cooling_base = 65, degree_F
# Base temperature for growing days, with unit:
growing_base = 50, degree_F

# A trend takes a difference across a time period. The following
# section sets the time period, and how big an error is allowed to
# still be counted as the start or end of a period.
[[[[Trend]]]]

time_delta = 10800 # 3 hours
time_grace = 300 # 5 minutes

# The labels to be used for each observation type
[[[Labels]]]

# Set to hemisphere abbreviations suitable for your location:
hemispheres = N, S, E, W

# Formats to be used for latitude whole degrees, longitude whole
# degrees, and minutes:
latlon_formats = %02d, %03d, %05.2f

# Generic labels, keyed by an observation type.
[[[[Generic]]]]
barometer = Barometer
dewpoint = Dew Point
ET = ET
heatindex = Heat Index
inHumidity = Inside Humidity
inTemp = Inside Temperature
outHumidity = Humidity
outTemp = Outside Temperature
radiation = Radiation
rain = Rain
rainRate = Rain Rate
UV = UV Index
windDir = Wind Direction
windGust = Gust Speed
windGustDir = Gust Direction
windSpeed = Wind Speed
windchill = Wind Chill
windgustvec = Gust Vector
windvec = Wind Vector
extraTemp1 = Temperature1
extraTemp2 = Temperature2
extraTemp3 = Temperature3

# Sensor status indicators

rxCheckPercent = Signal Quality
txBatteryStatus = Transmitter Battery
windBatteryStatus = Wind Battery
rainBatteryStatus = Rain Battery
outTempBatteryStatus = Outside Temperature Battery
inTempBatteryStatus = Inside Temperature Battery
consBatteryVoltage = Console Battery
heatingVoltage = Heating Battery
supplyVoltage = Supply Voltage
referenceVoltage = Reference Voltage

[[[Almanac]]]

# The labels to be used for the phases of the moon:
moon_phases = New, Waxing crescent, First quarter, Waxing gibbous, Full, Waning gibbous, Last quarter, Waning crescent
#
############################################################################

[[Weather34Report]]
skin = Weather34
HTML_ROOT = /var/www/html/weewx/weather34/
[[[Units]]]
[[[[Groups]]]]
group_altitude = meter
group_degree_day = degree_C_day
group_pressure = hPa
group_rain = mm
group_rainrate = mm_per_hour
group_speed = meter_per_second
group_speed2 = meter_per_second2
group_temperature = degree_C
#
############################################################################

[[w34Highcharts]]
HTML_ROOT = /var/www/html/weewx/weather34/w34highcharts
skin = w34Highcharts
enable = true
[[[CheetahGenerator]]]
[[[[ToDate]]]]
[[[[[YearJSON]]]]]
stale_age = 600
[[[Units]]]
[[[[StringFormats]]]]
centibar = %.0f
cm = %.2f
cm_per_hour = %.2f
degree_C = %.1f
degree_F = %.1f
degree_compass = %.0f
foot = %.0f
hPa = %.1f
inHg = %.3f
inch = %.2f
inch_per_hour = %.2f
km_per_hour = %.0f
km_per_hour2 = %.1f
knot = %.0f
knot2 = %.1f
mbar = %.1f
meter = %.0f
meter_per_second = %.1f
meter_per_second2 = %.1f
mile_per_hour = %.0f
mile_per_hour2 = %.1f
mm = %.1f
mmHg = %.1f
mm_per_hour = %.1f
percent = %.0f
uv_index = %.1f
volt = %.1f
watt_per_meter_squared = %.0f
NONE = N/A
[[[[Labels]]]]
centibar = cb
cm = cm
cm_per_hour = cm/hr
degree_C = ° C
degree_F = ° F
degree_compass = °
foot = feet
hPa = hPa
inHg = inHg
inch = in
inch_per_hour = in/hr
km_per_hour = km/hr
km_per_hour2 = km/hr
knot = knots
knot2 = knots
mbar = mbar
meter = meters
meter_per_second = m/s
meter_per_second2 = m/s
mile_per_hour = mph
mile_per_hour2 = mph
mm = mm
mmHg = mmHg
mm_per_hour = mm/hr
percent = %
uv_index = Index
volt = V
watt_per_meter_squared = W/m²
NONE = ""
[[[Extras]]]
[[[[MinRange]]]]
outTemp = 10, degree_C
windchill = 10, degree_C
barometer = 20, hPa
windSpeed = 10
rain = 5, mm
radiation = 500
UV = 16
[[[[WindRose]]]]
title = Wind Rose
source = windSpeed
period = 3600, 86400, 604800, month, year
aggregate_type = ""
aggregate_interval = ""
petals = 16
petal_colors = aqua, 0x0099FF, 0x0033FF, 0x009900, 0x00CC00, 0x33FF33, 0xCCFF00
speedfactor = 0.0, 0.1, 0.2, 0.3, 0.5, 0.7, 1.0
legend_title = True
band_percent = True
bullseye_percent = True
precision = 1
bullseye_size = 20
bullseye_color = 0xFFFACD
calm_limit = 0.1

##############################################################################

# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.

[StdConvert]

# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.

# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = METRIC # Options are 'US', 'METRICWX', or 'METRIC'

##############################################################################

# This section can adjust data using calibration expressions.

[StdCalibrate]

[[Corrections]]
# For each type, an arbitrary calibration _expression_ can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2

##############################################################################

# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.

[StdQC]

[[MinMax]]
barometer = 26, 32.5, inHg
pressure = 24, 34.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
rain = 0, 10, inch

##############################################################################

# This section controls the origin of derived values.

[StdWXCalculate]

[[Calculations]]
# How to calculate derived quantities. Possible values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx

pressure = prefer_hardware
altimeter = prefer_hardware
appTemp = prefer_hardware
barometer = prefer_hardware
beaufort = prefer_hardware
cloudbase = prefer_hardware
dewpoint = prefer_hardware
ET = prefer_hardware
heatindex = prefer_hardware
humidex = prefer_hardware
inDewpoint = prefer_hardware
maxSolarRad = prefer_hardware
rainRate = prefer_hardware
windchill = prefer_hardware
windrun = prefer_hardware

##############################################################################

# For hardware that supports it, this section controls how often the
# onboard clock gets updated.

[StdTimeSynch]

# How often to check the weather station clock for drift (in seconds)
clock_check = 14400

# How much it can drift before we will correct it (in seconds)
max_drift = 5

##############################################################################

# This section is for configuring the archive service.

[StdArchive]

# If the station hardware supports data logging then the archive interval
# will be downloaded from the station. Otherwise, specify it (in seconds).
archive_interval = 300

# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = hardware

# Whether to include LOOP data in hi/low statistics
loop_hilo = True

# The data binding used to save archive records
data_binding = wx_binding

##############################################################################

# This section binds a data store to a database.

[DataBindings]

[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_sqlite
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.manager.DaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview_extended.schema

##############################################################################

# This section defines various databases.

[Databases]

# A SQLite database is simply a single file
[[archive_sqlite]]
database_name = weewx.sdb
database_type = SQLite

# MySQL
[[archive_mysql]]
database_name = weewx
database_type = MySQL

##############################################################################

# This section defines defaults for the different types of databases.

[DatabaseTypes]

# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /home/weewx/archive

# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user = XXX obfuscated by wee_debug XXX
# The password for the user name (quotes guard against parsing errors)
password = XXX obfuscated by wee_debug XXX

##############################################################################

# This section configures the internal weewx engine.

[Engine]

[[Services]]
# This section specifies the services that should be run. They are
# grouped by type, and the order of services within each group
# determines the order in which the services will be run.
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate, user.weather34.Weather34RealTime
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
#
################################################################################

[Weather34RealTime]
filename = /var/www/html/weewx/weather34/w34realtime.txt
unit_system = METRICWX
exclude_fields = rain
cache_enable = True
cache_directory = /tmp
cache_stale_time = 900
weewx_port = 25252
webserver_address = ""
weewxserver_address = ""
weewx_file_transfer = ""
#
################################################################################

[Weather34WebServices]
filename = /var/www/html/weewx/weather34/settings1.php
#
################################################################################

[Weather34WebServer]
enable = true
#
################################################################################

[Weather34CloudCover]
enable = true
db_field = signal8

wee_debug report successfully generated

Il giorno mercoledì 12 agosto 2020 alle 16:25:42 UTC+2 Mauro De Lauretis ha scritto:
This the syslog:

Aug 12 16:19:33 raspberrypi systemd[1]: Starting LSB: weewx weather system...
Aug 12 16:19:36 raspberrypi weewx[14231] INFO __main__: Initializing weewx version 4.1.1
Aug 12 16:19:36 raspberrypi weewx[14231] INFO __main__: Using Python 3.7.3 (default, Dec 20 2019, 18:57:59) #012[GCC 8.3.0]
Aug 12 16:19:36 raspberrypi weewx[14231] INFO __main__: Platform Linux-5.4.51+-armv6l-with-debian-10.4
Aug 12 16:19:36 raspberrypi weewx[14231] INFO __main__: Locale is 'it_IT.UTF-8'
Aug 12 16:19:36 raspberrypi weewx[14231] INFO __main__: PID file is /var/run/weewx.pid
Aug 12 16:19:36 raspberrypi weewx[14220]: Starting weewx weather system: weewx.
Aug 12 16:19:36 raspberrypi systemd[1]: Started LSB: weewx weather system.
Aug 12 16:19:37 raspberrypi weewx[14240] INFO __main__: Using configuration file /home/weewx/weewx.conf
Aug 12 16:19:37 raspberrypi weewx[14240] INFO __main__: Debug is 1
Aug 12 16:19:37 raspberrypi weewx[14240] DEBUG __main__: Initializing engine
Aug 12 16:19:37 raspberrypi weewx[14240] INFO weewx.engine: Loading station type Vantage (weewx.drivers.vantage)
Aug 12 16:19:37 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage: Driver version is 3.2.1
Aug 12 16:19:37 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage: Opened up serial port /dev/ttyUSB0; baud 19200; timeout 4.00
Aug 12 16:19:37 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Aug 12 16:19:37 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage: Hardware type is 16
Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage: ISS ID is 1
Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage: Hardware name: Vantage Pro2
Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.engine: Loading service weewx.engine.StdTimeSynch
Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.engine: Finished loading service weewx.engine.StdTimeSynch
Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.engine: Loading service weewx.engine.StdConvert
Aug 12 16:19:38 raspberrypi weewx[14240] INFO weewx.engine: StdConvert target unit is 0x10
Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.engine: Finished loading service weewx.engine.StdConvert
Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.engine: Loading service weewx.engine.StdCalibrate
Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.engine: Finished loading service weewx.engine.StdCalibrate
Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.engine: Loading service weewx.engine.StdQC
Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.engine: Finished loading service weewx.engine.StdQC
Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.engine: Loading service weewx.wxservices.StdWXCalculate
Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.manager: Daily summary version is 2.0
Aug 12 16:19:38 raspberrypi weewx[14240] INFO weewx.wxservices: The following values will be calculated: pressure=prefer_hardware, altimeter=prefer_hardware, appTemp=prefer_hardware, barometer=prefer_hardware, beaufort=prefer_hardware, cloudbase=prefer_hardware, dewpoint=prefer_hardware, ET=prefer_hardware, heatindex=prefer_hardware, humidex=prefer_hardware, inDewpoint=prefer_hardware, maxSolarRad=prefer_hardware, rainRate=prefer_hardware, windchill=prefer_hardware, windrun=prefer_hardware
Aug 12 16:19:38 raspberrypi weewx[14240] INFO weewx.wxservices: The following algorithms will be used for calculations: altimeter=aaASOS, maxSolarRad=RS
Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.engine: Finished loading service weewx.wxservices.StdWXCalculate
Aug 12 16:19:38 raspberrypi weewx[14240] DEBUG weewx.engine: Loading service user.weather34.Weather34RealTime
Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: service version is 0.0.5
Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: output goes to /var/www/html/weewx/weather34/w34realtime.txt
Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: 'None' values will be displayed as NULL
Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: units will be displayed as METRICWX
Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: zambretti forecast: False
Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: Web Service: ds is installed
Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: Web Service: me is installed
Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: Web Service: eq is installed
Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: Web Service: ki is installed
Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: Web Service: wu is installed
Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: Web Service: aq is installed
Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: Web Service: al is installed
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG user.weather34: CloudCover Url 1 "https://api.sat24.com/crop?type=visual5hdcomplete&lat=42.634585&lon=14.040554&width=300&height=300&zoom=1.00&continent=eu"
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG user.weather34: CloudCover service has started
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG user.weather34: CloudCover Url 2 "https://api.sat24.com/crop?type=infraPolair&lat=42.634585&lon=14.040554&width=300&height=300&zoom=1.00&continent=eu"
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG user.weather34: CloudCover File 1 /var/www/html/weewx/weather34/jsondata/sat1.png
Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: Check lightning Strike Count: False
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG user.weather34: CloudCover File 2 /var/www/html/weewx/weather34/jsondata/sat2.png
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG user.weather34: excluding fields: {'rain'}
Aug 12 16:19:39 raspberrypi weewx[14240] INFO user.weather34: Weather34 Weather34RealTime in cache is: True
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Finished loading service user.weather34.Weather34RealTime
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Loading service weewx.engine.StdArchive
Aug 12 16:19:39 raspberrypi weewx[14240] INFO weewx.engine: Archive will use data binding wx_binding
Aug 12 16:19:39 raspberrypi weewx[14240] INFO weewx.engine: Record generation will be attempted in 'hardware'
Aug 12 16:19:39 raspberrypi weewx[14240] INFO weewx.engine: Using archive interval of 300 seconds (specified by hardware)
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Use LOOP data in hi/low calculations: 1
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Finished loading service weewx.engine.StdArchive
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Loading service weewx.restx.StdStationRegistry
Aug 12 16:19:39 raspberrypi weewx[14240] INFO weewx.restx: StationRegistry: Station will be registered.
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Finished loading service weewx.restx.StdStationRegistry
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Loading service weewx.restx.StdWunderground
Aug 12 16:19:39 raspberrypi weewx[14240] INFO weewx.restx: Wunderground: Posting not enabled.
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Finished loading service weewx.restx.StdWunderground
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Loading service weewx.restx.StdPWSweather
Aug 12 16:19:39 raspberrypi weewx[14240] INFO weewx.restx: PWSweather: Posting not enabled.
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Finished loading service weewx.restx.StdPWSweather
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Loading service weewx.restx.StdCWOP
Aug 12 16:19:39 raspberrypi weewx[14240] INFO weewx.restx: CWOP: Posting not enabled.
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Finished loading service weewx.restx.StdCWOP
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Loading service weewx.restx.StdWOW
Aug 12 16:19:39 raspberrypi weewx[14240] INFO weewx.restx: WOW: Posting not enabled.
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Finished loading service weewx.restx.StdWOW
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Loading service weewx.restx.StdAWEKAS
Aug 12 16:19:39 raspberrypi weewx[14240] INFO weewx.restx: AWEKAS: Posting not enabled.
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Finished loading service weewx.restx.StdAWEKAS
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Loading service weewx.engine.StdPrint
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Finished loading service weewx.engine.StdPrint
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Loading service weewx.engine.StdReport
Aug 12 16:19:39 raspberrypi weewx[14240] DEBUG weewx.engine: Finished loading service weewx.engine.StdReport
Aug 12 16:19:40 raspberrypi weewx[14240] INFO __main__: Starting up weewx version 4.1.1
Aug 12 16:19:40 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Aug 12 16:19:40 raspberrypi weewx[14240] INFO weewx.engine: Clock error is -3.06 seconds (positive is fast)
Aug 12 16:19:40 raspberrypi weewx[14240] INFO weewx.engine: Using binding 'wx_binding' to database 'weewx.sdb'
Aug 12 16:19:40 raspberrypi weewx[14240] INFO weewx.manager: Starting backfill of daily summaries
Aug 12 16:19:40 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage: Getting archive packets since 2020-08-12 16:15:00 CEST (1597241700)
Aug 12 16:19:40 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Aug 12 16:19:40 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage: Retrieving 0 page(s); starting index= 0
Aug 12 16:19:40 raspberrypi weewx[14240] INFO weewx.engine: Starting main packet loop.
Aug 12 16:19:40 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Aug 12 16:19:40 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage: Requesting 200 LOOP packets.
Aug 12 16:19:40 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Aug 12 16:19:40 raspberrypi weewx[14240] DEBUG user.weather34: CloudCover url1 exit code 0
Aug 12 16:19:42 raspberrypi weewx[14240] DEBUG user.weather34: CloudCover url2 exit code 0
Aug 12 16:19:42 raspberrypi weewx[14240] DEBUG PIL.PngImagePlugin: STREAM b'IHDR' 16 13
Aug 12 16:19:42 raspberrypi weewx[14240] DEBUG PIL.PngImagePlugin: STREAM b'gAMA' 41 4
Aug 12 16:19:42 raspberrypi weewx[14240] DEBUG PIL.PngImagePlugin: STREAM b'pHYs' 57 9
Aug 12 16:19:42 raspberrypi weewx[14240] DEBUG PIL.PngImagePlugin: STREAM b'IDAT' 78 65458
Aug 12 16:19:42 raspberrypi weewx[14240] DEBUG PIL.Image: Error closing: 'Image' object has no attribute 'fp'
Aug 12 16:19:49 raspberrypi weewx[14240] DEBUG user.weather34: Webserver: weewx host ip 192.168.178.31 listening on port 25252
Aug 12 16:20:15 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage: Getting archive packets since 2020-08-12 16:15:00 CEST (1597241700)
Aug 12 16:20:15 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Aug 12 16:20:15 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage: Retrieving 1 page(s); starting index= 1
Aug 12 16:20:16 raspberrypi weewx[14240] DEBUG user.weather34: CloudCover: Percent value is 1
Aug 12 16:20:16 raspberrypi weewx[14240] INFO weewx.manager: Added record 2020-08-12 16:20:00 CEST (1597242000) to database 'weewx.sdb'
Aug 12 16:20:17 raspberrypi weewx[14240] INFO weewx.manager: Added record 2020-08-12 16:20:00 CEST (1597242000) to daily summary in 'weewx.sdb'
Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage: DMPAFT complete: page timestamp 2020-08-03 18:35:00 CEST (1596472500) less than final timestamp 2020-08-12 16:20:00 CEST (1597242000)
Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage: Catch up complete.
Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.reportengine: Running reports for latest time in the database.
Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage: Requesting 200 LOOP packets.
Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.reportengine: Report 'SeasonsReport' not enabled. Skipping.
Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.reportengine: Report 'SmartphoneReport' not enabled. Skipping.
Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.reportengine: Report 'MobileReport' not enabled. Skipping.
Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.drivers.vantage: Gentle wake up of console successful
Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.reportengine: Report 'StandardReport' not enabled. Skipping.
Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.reportengine: Report 'FTP' not enabled. Skipping.
Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.reportengine: Report 'RSYNC' not enabled. Skipping.
Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.reportengine: Running report 'Weather34Report'
Aug 12 16:20:17 raspberrypi weewx[14240] DEBUG weewx.reportengine: Found configuration file /home/weewx/skins/Weather34/skin.conf for report 'Weather34Report'
Aug 12 16:20:18 raspberrypi weewx[14240] INFO weewx.restx: StationRegistry: Published record 2020-08-12 16:20:00 CEST (1597242000)
Aug 12 16:20:21 raspberrypi weewx[14240] DEBUG weewx.cheetahgenerator: Using search list ['weewx.cheetahgenerator.Almanac', 'weewx.cheetahgenerator.Station', 'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.Stats', 'weewx.cheetahgenerator.UnitInfo', 'weewx.cheetahgenerator.Extras', 'user.stats.MyStats', 'user.lastrain.lastRainTags']
Aug 12 16:20:21 raspberrypi weewx[14240] DEBUG weewx.manager: Daily summary version is 2.0
Aug 12 16:20:31 raspberrypi weewx[14240] INFO weewx.cheetahgenerator: Generated 2 files for report Weather34Report in 10.23 seconds
Aug 12 16:20:31 raspberrypi weewx[14240] INFO weewx.reportengine: Copied 0 files to /var/www/html/weewx/weather34/
Aug 12 16:20:31 raspberrypi weewx[14240] DEBUG weewx.reportengine: Running report 'w34Highcharts'
Aug 12 16:20:31 raspberrypi weewx[14240] DEBUG weewx.reportengine: Found configuration file /home/weewx/skins/w34Highcharts/skin.conf for report 'w34Highcharts'
Aug 12 16:20:32 raspberrypi weewx[14240] DEBUG weewx.cheetahgenerator: Using search list ['weewx.cheetahgenerator.Almanac', 'weewx.cheetahgenerator.Station', 'weewx.cheetahgenerator.Current', 'weewx.cheetahgenerator.Stats', 'weewx.cheetahgenerator.UnitInfo', 'weewx.cheetahgenerator.Extras', 'user.w34highchartsSearchX.w34highcharts_temp_week', 'user.w34highchartsSearchX.w34highcharts_bar_rain_week', 'user.w34highchartsSearchX.w34highcharts_wind_week', 'user.w34highchartsSearchX.w34highcharts_solar_week', 'user.w34highchartsSearchX.w34highcharts_indoor_derived_week', 'user.w34highchartsSearchX.w34highcharts_wind_rose_week', 'user.w34highchartsSearchX.w34highchartsYear']
Aug 12 16:20:32 raspberrypi weewx[14240] DEBUG weewx.manager: Daily summary version is 2.0
Aug 12 16:20:40 raspberrypi weewx[14240] ERROR user.weather34: Failed getting web service data. URL: https://api.forecast.io/forecast/darksky_key/42.634585,14.040554?lang=it&units=uk2 Header: ["'User-Agent'", "'Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_4; en-US) AppleWebKit/534.3 (KHTML, like Gecko) Chrome/6.0.472.63 Safari/534.3'"], Error: HTTP Error 403: Forbidden
Aug 12 16:20:50 raspberrypi weewx[14240] INFO weewx.cheetahgenerator: Generated 7 files for report w34Highcharts in 18.34 seconds
Aug 12 16:20:50 raspberrypi weewx[14240] INFO weewx.reportengine: Copied 0 files to /var/www/html/weewx/weather34/w34highcharts

Il giorno mercoledì 12 agosto 2020 alle 16:24:51 UTC+2 Mauro De Lauretis ha scritto:
****
root@raspberrypi:/var/www/html/weewx/weather34/w34highcharts/scripts# cat plots_config.js
var pathjsonfiles = "json/"; //Location weewx report output json files from home location of weewx. DO NOT CHANGE UNLESS YOU CHANGE SKIN DIRECTORY.
var pathjsondayfiles = "json_day/"; //Location day report output json files from home location of where wee_report_34 run. DO NOT CHANGE UNLESS YOU CHANGE SKIN DIRECTORY.
var weereportcmd = "./wee_reports_w34"; //Command to run wee_report_34. DO NOT CHANGE.
var realtimefilename = "w34realtime.txt"; //File name must match what is in the weewx config for realtime

var autoupdateinterval = 60; //This is seconds
var realtimeinterval = 10; //This is seconds
var hide_zero_wind_barb = false; //Hide/display Zero Barb
var disable_day_plots = false; //Disable day plots

//[0] array offset(s) to wanted real-time data(s)(can be empty),[1] array offset(s) to data's real-time units(can be empty),[2] array of unit convert function(s)(can be empty), [3] plot type, [4] plot X resolution, [5] delta value
// The (can be empty) entries then must have a plot_type that is another plot type entry with fill in values this is how to display a different plot_type when using real-time data.
var realtimeplot = {
temperatureplot:[[2,4],[14,14],['convert_temp','convert_temp'],['temperatureplot'],[150]],
tempallplot:[[2,4,3],[14,14,-1],['convert_temp','convert_temp',null],['tempallplot'], [150]],
winddirplot:[[7],[13],['convert_wind'],['winddirplot'], [150]],
windplot:[[6],[13],['convert_wind'],['windplot'],[150]],
windallplot:[[5,40,46],[13,13,-1],['convert_wind','convert_wind',null],['windallplot'],[150]],
barometerplot:[[10],[15],['convert_pressure'],['barometerplot'],[150]],
rainplot:[[47,8],[16,16],['convert_rain','convert_rain'],['rainplot'],[50],[]],
windroseplot:[[6,11],[13,-1],['convert_wind', null],['windroseplot'],[150]],
windrosegustplot:[[63,46],[13,-1],['convert_wind', null],['windrosegustplot'],[150]]
};
****
Il giorno mercoledì 12 agosto 2020 alle 10:13:47 UTC+2 Mauro De Lauretis ha scritto:
The location of the executable is there because it is installed liked that to run on the local server.

If I try to do sudo PYTHONPATH=/home/weewx/bin python3 /var/www/html/weewx/weather34/w34highcharts/wee_reports_w34 I get this:

pi@raspberrypi:~ $ sudo su
root@raspberrypi:/home/pi# sudo PYTHONPATH=/home/weewx/bin python3 /var/www/html/weewx/weather34/w34highcharts/wee_reports_w34
Using configuration file /home/weewx/weewx.conf
Generating for all time
Traceback (most recent call last):
File "/var/www/html/weewx/weather34/w34highcharts/wee_reports_w34", line 99, in <module>
main()
File "/var/www/html/weewx/weather34/w34highcharts/wee_reports_w34", line 68, in main
config_dict['StdReport']['w34Highcharts']['CheetahGenerator'] = {'search_list_extensions': 'user.w34highchartsSearchX.w34highcharts_' + args[1].split('/')[-1].split('.')[0], 'encoding': 'strict_ascii', 'ToDate': {'DayJSON': {'template': args[1],'HTML_ROOT': args[2]}}}
IndexError: list index out of range

Il giorno mercoledì 12 agosto 2020 alle 03:27:38 UTC+2 tke...@gmail.com ha scritto:
You're probably right. I suspect the custom weather34 installer went a little ... off track.

On Tue, Aug 11, 2020 at 6:02 PM J D <balloon...@gmail.com> wrote:
This is not a weewx issue or a python path issue. The file is in the correct location, but the troubleshooting guide must be done to find out why there is an error.

On Tuesday, August 11, 2020 at 3:27:16 PM UTC-7, Mauro De Lauretis wrote:
Hi all!
I'm running the last version of weewx with python3 on my Raspberry Pi.
As skin I use the weather34 weewx version (https://github.com/steepleian/weewx-Weather34)

There are also incorporated highcharts that are created live from the database when selecting on the website.
However, a part of them won't work with my setup and this Is the message I get:

root@raspberrypi:~# sudo python3 /var/www/html/weewx/weather34/w34highcharts/wee_reports_w34
Traceback (most recent call last):
File "/var/www/html/weewx/weather34/w34highcharts/wee_reports_w34", line 8, in <module>
import weewx
ModuleNotFoundError: No module named 'weewx'

Do you have any ideas what the issue could be?

Thanks

Mauro
--
You received this message because you are subscribed to the Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/ca782342-2160-4630-aee3-438d53a85c50o%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/0366718c-aaa8-4a68-9e1b-7ab2f7006cdcn%40googlegroups.com.

--
You received this message because you are subscribed to the Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/b4e2ec0d-4c88-4094-9c6e-cc783056a138n%40googlegroups.com.

RE: [weewx-user] Re: Module Error

Reply via email to