I've installed it on two Pi zero W installations (with designated static IP address). Perfect installation, no problems whatsoever.
On Tuesday, August 18, 2020 at 8:23:36 AM UTC-5 gjr80 wrote: > On Tuesday, 18 August 2020 13:49:39 UTC+10, Graham Eddy wrote: >> >> unable to reproduce error - driver too reliable! >> >> sending the debug==3 logs anyway (direct to gary rather than clog up the >> forum) in case they prove useful later. >> three logs, one with GW1000 disconnected a bit more than 30 secs, another >> with just a few secs disconnection and another much longer (about 15 mins) >> - with suffix .txt (sorry about previous .log). >> at that debug level there is a lot of noise from my Alarms service… >> > > Thanks, replied separately re the logs. > > >> i must have hit a corner case on my first test. >> i don’t know weewx guts well enough but OSError exception (rather than >> IOError) coming from StdPrint sounds very strange, maybe a resource >> exhaustion >> > > I still can't quite get my head around exactly what happened, in some > regards it looked like the driver (run as a service in this case) was sent > a command to shutdown. I have found some faulty logic in the lost contact > handling in the driver that I believe could cause such a shutdown if the > GW1000 was lost. I need to work through that logic again and I need to look > at where the OSError was coming from. But that will have to wait a few days. > > >> >> Q: “Is there anything noteworthy about your GW1000/WeeWX machine network >> connections? Does the log cover two disconnections of the GW1000?" >> A: single disconnect, while moving GW1000 to its permanent position ready >> for cutover. no unusual config - both server (RPi 4) and GW1000 on wifi >> only, no service interruptions during tests, no weird interface-bending apps >> > > Just a single disconnect, interesting that that OSError was recurring, I > first thought you had two disconnections. Makes me think there was > something else going on but it stills seems to have been triggered by the > GW1000 disconnection. > > Gary > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/557a147e-29f1-4cbd-a879-8486f7305236n%40googlegroups.com.