My error was publishing the data as strings. Now that I am publishing
floats, all is working for me.
Thanks again for this app.
rich
On Wednesday, 9 December 2020 at 11:39:23 UTC-5 bell...@gmail.com wrote:
> I did. Since then I have tried the following.
> 1. Publish as metric and change the application configuration back to
> metric.
> 2. Only publish outTemp_C and configure only an ‘Outside Temperature’
> gauge.
> I’m sure I’m missing something obvious. I’ll keep experimenting.
> rich
>
> On Wednesday, 9 December 2020 at 05:54:49 UTC-5 sama...@gmail.com wrote:
>
>> In the application configuration have you turned your station units to
>> imperial? (I think they default to metric)
>>
>> That would make a difference between looking for example between
>> heatindex_F and headindex_C which is part of the whole topic string
>>
>>
>> Thanks
>>
>> On Tue, Dec 8, 2020 at 7:44 PM bell...@gmail.com <bell...@gmail.com>
>> wrote:
>>
>>>
>>> Interesting. The first time I clicked on the link it only installed
>>> TestFlight. But I digress. I must be doing something wrong. I get the
>>> green dot, so I think I am connected. I entered weather/individual as my
>>> topic.
>>> Here is some output from some test code
>>> Connected with result code 0
>>> Connected flags {'session present': 0}
>>> Subscribing to weather/individual/# has a mid 1 and rc 0
>>> Subscribed to topic mid: 1 is size 1 has a QOS of 0
>>> topic: weather/individual/monthET
>>> payload: b'"0.11"'
>>> topic: weather/individual/heatindex_F
>>> payload: b'"22.5"'
>>> topic: weather/individual/outHumidity
>>> payload: b'"86.0"'
>>> topic: weather/individual/dayET
>>> payload: b'"0.006"'
>>> topic: weather/individual/maxSolarRad_Wpm2
>>> payload: b'"0.0"'
>>> topic: weather/individual/consBatteryVoltage_volt
>>> payload: b'"4.54"'
>>> topic: weather/individual/monthRain_in
>>> payload: b'"0.14"'
>>> topic: weather/individual/insideAlarm
>>> payload: b'"0.0"'
>>> topic: weather/individual/barometer_inHg
>>> payload: b'"29.282"'
>>> topic: weather/individual/dayRain_in
>>> payload: b'"0.0"'
>>> topic: weather/individual/stormRain_in
>>> payload: b'"0.0"'
>>> topic: weather/individual/sunrise
>>> payload: b'"1607429520.0"'
>>> topic: weather/individual/windchill_F
>>> payload: b'"22.5"'
>>> topic: weather/individual/dewpoint_F
>>> payload: b'"18.9577377882"'
>>> topic: weather/individual/outsideAlarm1
>>> payload: b'"0.0"'
>>> topic: weather/individual/soilLeafAlarm2
>>> payload: b'"0.0"'
>>> topic: weather/individual/outsideAlarm2
>>> payload: b'"0.0"'
>>> topic: weather/individual/radiation_Wpm2
>>> payload: b'"0.0"'
>>> topic: weather/individual/forecastRule
>>> payload: b'"192.0"'
>>> topic: weather/individual/rainAlarm
>>> payload: b'"0.0"'
>>> topic: weather/individual/inTemp_F
>>> payload: b'"67.4"'
>>> topic: weather/individual/inHumidity
>>> payload: b'"38.0"'
>>> topic: weather/individual/windSpeed10_mph
>>> payload: b'"0.0"'
>>> topic: weather/individual/yearRain_in
>>> payload: b'"23.37"'
>>> topic: weather/individual/inDewpoint_F
>>> payload: b'"40.9048059523 <(904)%20805-9523>"'
>>> topic: weather/individual/extraAlarm1
>>> payload: b'"0.0"'
>>> topic: weather/individual/extraAlarm2
>>> payload: b'"0.0"'
>>> topic: weather/individual/extraAlarm3
>>> payload: b'"0.0"'
>>> topic: weather/individual/extraAlarm4
>>> payload: b'"0.0"'
>>> topic: weather/individual/extraAlarm5
>>> payload: b'"0.0"'
>>> topic: weather/individual/extraAlarm6
>>> payload: b'"0.0"'
>>> topic: weather/individual/extraAlarm7
>>> payload: b'"0.0"'
>>> topic: weather/individual/extraAlarm8
>>> payload: b'"0.0"'
>>> topic: weather/individual/rainRate_inch_per_hour
>>> payload: b'"0.0"'
>>> topic: weather/individual/rain_in
>>> payload: b'"0.0"'
>>> topic: weather/individual/humidex_F
>>> payload: b'"22.5"'
>>> topic: weather/individual/forecastIcon
>>> payload: b'"18.0"'
>>> topic: weather/individual/pressure_inHg
>>> payload: b'"28.7311013367"'
>>> topic: weather/individual/soilLeafAlarm4
>>> payload: b'"0.0"'
>>> topic: weather/individual/trendIcon
>>> payload: b'"0.0"'
>>> topic: weather/individual/altimeter_inHg
>>> payload: b'"29.2387383925"'
>>> topic: weather/individual/soilLeafAlarm3
>>> payload: b'"0.0"'
>>> topic: weather/individual/usUnits
>>> payload: b'"1.0"'
>>> topic: weather/individual/soilLeafAlarm1
>>> payload: b'"0.0"'
>>> topic: weather/individual/leafWet4
>>> payload: b'"0.0"'
>>> topic: weather/individual/yearET
>>> payload: b'"25.01"'
>>> topic: weather/individual/txBatteryStatus
>>> payload: b'"0.0"'
>>> topic: weather/individual/appTemp_F
>>> payload: b'"17.4069618021 <(406)%20961-8021>"'
>>> topic: weather/individual/UV
>>> payload: b'"0.0"'
>>> topic: weather/individual/dateTime
>>> payload: b'"1607474098.0"'
>>> topic: weather/individual/outTemp_F
>>> payload: b'"22.5"'
>>> topic: weather/individual/windSpeed_mph
>>> payload: b'"0.0"'
>>> topic: weather/individual/sunset
>>> payload: b'"1607464200.0"'
>>> topic: weather/individual/windGust_mph
>>> payload: b'"0.0"'
>>> topic: weather/individual/cloudbase_foot
>>> payload: b'"1295.05959359"'
>>> topic: weather/individual/hourRain_in
>>> payload: b'"0.0"'
>>> topic: weather/individual/rain24_in
>>> payload: b'"0.0"'
>>> Exception in thread Thread-4:
>>> Traceback (most recent call last):
>>> File
>>> "/var/containers/Bundle/Application/98214C3F-7429-489D-8C5B-62EBF1A92501/Pythonista3.app/Frameworks/Py3Kit.framework/pylib/threading.py",
>>>
>>> line 917, in _bootstrap_inner
>>> self.run()
>>> File
>>> "/var/containers/Bundle/Application/98214C3F-7429-489D-8C5B-62EBF1A92501/Pythonista3.app/Frameworks/Py3Kit.framework/pylib/threading.py",
>>>
>>> line 865, in run
>>> self._target(*self._args, **self._kwargs)
>>> File
>>> "/private/var/mobile/Containers/Shared/AppGroup/03C7B2FF-1C6F-474E-A5E4-35A11C6986BE/Pythonista3/Documents/site-packages-3/paho/mqtt/client.py",
>>>
>>> line 3428, in _thread_main
>>> self.loop_forever(retry_first_connection=True)
>>> File
>>> "/private/var/mobile/Containers/Shared/AppGroup/03C7B2FF-1C6F-474E-A5E4-35A11C6986BE/Pythonista3/Documents/site-packages-3/paho/mqtt/client.py",
>>>
>>> line 1782, in loop_forever
>>> rc = self.loop(timeout, max_packets)
>>> File
>>> "/private/var/mobile/Containers/Shared/AppGroup/03C7B2FF-1C6F-474E-A5E4-35A11C6986BE/Pythonista3/Documents/site-packages-3/paho/mqtt/client.py",
>>>
>>> line 1163, in loop
>>> socklist = select.select(rlist, wlist, [], timeout)
>>> KeyboardInterrupt
>>>
>>>
>>> On Tuesday, 8 December 2020 at 19:23:48 UTC-5 sama...@gmail.com wrote:
>>>
>>>> *https://testflight.apple.com/join/EPwi6NBP
>>>> <https://testflight.apple.com/join/EPwi6NBP>* <-- This is the link.
>>>> (also in the previous post) you can visit it from your iOS device and it
>>>> will open testflight and ask you to open the application, etc.
>>>>
>>>> On Tuesday, December 8, 2020 at 7:20:46 PM UTC-5 bell...@gmail.com
>>>> wrote:
>>>>
>>>>> OK, I’m new to this. I’ve installed TestFlight, but it seems like I
>>>>> need a link or something to your app...
>>>>> rich
>>>>>
>>>>> On Tuesday, 8 December 2020 at 17:14:52 UTC-5 sama...@gmail.com wrote:
>>>>>
>>>>>> TestFlight link for testing the build:
>>>>>> https://testflight.apple.com/join/EPwi6NBP
>>>>>>
>>>>>> Let me know if that works for you with the custom topic name and I
>>>>>> will push to the Apple store if it does.
>>>>>>
>>>>>> On Mon, Dec 7, 2020 at 17:26 Constantine Samaklis <sama...@gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> I have submitted a new build where the topic can be specified. As
>>>>>>> soon as it gets approved, I will post a link where you can use
>>>>>>> testflight
>>>>>>> for you to test it and see if it works as expected.
>>>>>>>
>>>>>>> On Sunday, December 6, 2020 at 7:42:20 PM UTC-5 bell...@gmail.com
>>>>>>> wrote:
>>>>>>>
>>>>>>>> This looks really cool. I too am anxiously awaiting to be able to
>>>>>>>> specify the topic. In my case, I am publishing json loop data to
>>>>>>>> weather/loop, json archive data to weather/archive, both to
>>>>>>>> weather/looparchive. So if I could specify something like
>>>>>>>> weather/loop-individual/#... but I could easily publish to almost
>>>>>>>> anything
>>>>>>>> but weather/#.
>>>>>>>> Again, thanks for sharing! If I can help in any way, let me know.
>>>>>>>> rich
>>>>>>>>
>>>>>>>> On Sunday, 6 December 2020 at 18:37:04 UTC-5 blu...@gmail.com
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> Ok understood; my topics are published as weather/corbett and
>>>>>>>>> weather/williams for different locations. I look forward to that
>>>>>>>>> enhancement! This looks like a cool app.
>>>>>>>>>
>>>>>>>>> On Dec 6, 2020, at 3:27 PM, Constantine Samaklis <
>>>>>>>>> sama...@gmail.com> wrote:
>>>>>>>>>
>>>>>>>>> Currently no. It defaults to weather/#. The gauges are also
>>>>>>>>> limited to the topics published by the MQTT extension so for example
>>>>>>>>> if you
>>>>>>>>> have configured the extension to run in metric, you will
>>>>>>>>> have weather/windchill_C for windchill and if you have it configured
>>>>>>>>> for
>>>>>>>>> imperial units, then it will listen for weather/windchill_F.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> The pattern is similar across all the available gauges.
>>>>>>>>>
>>>>>>>>> I have also left some topics as soil alarm and other alarm ones
>>>>>>>>> out, as they are present only in professional weather stations such
>>>>>>>>> as
>>>>>>>>> Vantage Pro, and have not seen them used, outside of farming
>>>>>>>>> applications.
>>>>>>>>> (On my todo list at some point though.)
>>>>>>>>>
>>>>>>>>> On Sunday, December 6, 2020 at 6:15:19 PM UTC-5 blu...@gmail.com
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> I love this! Is there a way to change the topic name to look
>>>>>>>>>> for?
>>>>>>>>>>
>>>>>>>>>> On Dec 6, 2020, at 12:42 PM, Christopher Joseph Alemany <
>>>>>>>>>> chri...@gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>> Very cool! Thank you Constantine and great work! I’ll install
>>>>>>>>>> the mqtt extension just for this. Consider this friendly and
>>>>>>>>>> appreciative
>>>>>>>>>> encouragement to port it to Swift!
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Cheers
>>>>>>>>>> Chris
>>>>>>>>>> www.Alberniweather.ca
>>>>>>>>>> “They always tell me it takes time. How much more time do you
>>>>>>>>>> want...for your progress?”
>>>>>>>>>> James Baldwin
>>>>>>>>>>
>>>>>>>>>> Chris Alemany
>>>>>>>>>> 3854 6th Ave
>>>>>>>>>> Port Alberni, BC
>>>>>>>>>> V9Y4M2
>>>>>>>>>> h:250-723-0889
>>>>>>>>>> w: 250-753-3245 x2106 <250-753-3245;2106>
>>>>>>>>>> e: chri...@gmail.com
>>>>>>>>>> w: www.chrisalemany.ca
>>>>>>>>>> w: www.alberniweather.ca
>>>>>>>>>> w: www.vifreightbyrail.ca
>>>>>>>>>>
>>>>>>>>>> On Dec 6, 2020, at 08:30, Constantine Samaklis <sama...@gmail.com>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>> I have been using WeeWX for seven years or so and I have been
>>>>>>>>>> inspired by the work that Tom and others have put into making this
>>>>>>>>>> software
>>>>>>>>>> better and also expandable.
>>>>>>>>>>
>>>>>>>>>> Ever since I added the MQTT extension to WeeWX I was able to
>>>>>>>>>> incorporate live weather data from my Vantage Pro weather station,
>>>>>>>>>> which I
>>>>>>>>>> think it is very cool.
>>>>>>>>>>
>>>>>>>>>> I wanted to give back something to the community, so I spent some
>>>>>>>>>> time writing a GUI in Pythonista on my iPad, and I have ported it
>>>>>>>>>> over to
>>>>>>>>>> the Apple store as a free application, in hopes that it can be
>>>>>>>>>> useful to
>>>>>>>>>> others.
>>>>>>>>>>
>>>>>>>>>> I am always mesmerized by moving dials and I also find that the
>>>>>>>>>> application, apart from giving you quick access to your weather
>>>>>>>>>> station's
>>>>>>>>>> data, it looks quite good as a make shift screen, especially on
>>>>>>>>>> larger iPad
>>>>>>>>>> screens. :-)
>>>>>>>>>>
>>>>>>>>>> You can fetch the application from the app store from the below
>>>>>>>>>> link or look for "weather mqtt"
>>>>>>>>>>
>>>>>>>>>> https://apps.apple.com/us/app/weather-mqtt/id1542679289
>>>>>>>>>>
>>>>>>>>>> I have also put together a quick user guide at;
>>>>>>>>>> https://www.samaklis.com/confluence/display/WEAT/2020/12/05/Weather+MQTT+Support
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> PS The application is a port from Python to Objective C, so you
>>>>>>>>>> may experience a crash from time to time as it is not OS native. I
>>>>>>>>>> am in
>>>>>>>>>> the process of looking into SWIFT and in time, based on community
>>>>>>>>>> interest,
>>>>>>>>>> I will try and put some work on porting the application to it. so it
>>>>>>>>>> is iOS
>>>>>>>>>> native.
>>>>>>>>>>
>>>>>>>>>> Thanks again to all the weather enthusiasts out there that make
>>>>>>>>>> applications like WeeWX possible.
>>>>>>>>>>
>>>>>>>>>> <IMG_0727.PNG>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>>> send an email to weewx-user+...@googlegroups.com.
>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/0084e413-3fac-446d-a8c1-7158db8ebb72n%40googlegroups.com
>>>>>>>>>>
>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/0084e413-3fac-446d-a8c1-7158db8ebb72n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>> .
>>>>>>>>>> <IMG_0727.PNG>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>>> send an email to weewx-user+...@googlegroups.com.
>>>>>>>>>>
>>>>>>>>>> To view this discussion on the web visit
>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/A0ED93AC-FC10-409C-B13C-CC6E2E2B5BE0%40gmail.com
>>>>>>>>>>
>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/A0ED93AC-FC10-409C-B13C-CC6E2E2B5BE0%40gmail.com?utm_medium=email&utm_source=footer>
>>>>>>>>>> .
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>> You received this message because you are subscribed to the Google
>>>>>>>>> Groups "weewx-user" group.
>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>> send an email to weewx-user+...@googlegroups.com.
>>>>>>>>>
>>>>>>>>> To view this discussion on the web visit
>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/678c9f2e-2d82-4bb4-bea1-448ac1494c6an%40googlegroups.com
>>>>>>>>>
>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/678c9f2e-2d82-4bb4-bea1-448ac1494c6an%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>> .
>>>>>>>>>
>>>>>>>>> --
>>>>>>>
>>>>>> You received this message because you are subscribed to a topic in
>>>>>>> the Google Groups "weewx-user" group.
>>>>>>> To unsubscribe from this topic, visit
>>>>>>> https://groups.google.com/d/topic/weewx-user/Vp4-lsjcDko/unsubscribe
>>>>>>> .
>>>>>>> To unsubscribe from this group and all its topics, send an email to
>>>>>>> weewx-user+...@googlegroups.com.
>>>>>>> To view this discussion on the web visit
>>>>>>> https://groups.google.com/d/msgid/weewx-user/c2ccd9cc-d929-40cc-a851-cc0d839d98ben%40googlegroups.com
>>>>>>>
>>>>>>> <https://groups.google.com/d/msgid/weewx-user/c2ccd9cc-d929-40cc-a851-cc0d839d98ben%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>> .
>>>>>>>
>>>>>> --
>>> You received this message because you are subscribed to a topic in the
>>> Google Groups "weewx-user" group.
>>> To unsubscribe from this topic, visit
>>> https://groups.google.com/d/topic/weewx-user/Vp4-lsjcDko/unsubscribe.
>>> To unsubscribe from this group and all its topics, send an email to
>>> weewx-user+...@googlegroups.com.
>>>
>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/weewx-user/9700a618-3586-43f2-9226-eb9a70c98616n%40googlegroups.com
>>>
>>> <https://groups.google.com/d/msgid/weewx-user/9700a618-3586-43f2-9226-eb9a70c98616n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/0dc281a9-3728-4795-9a95-2c99ecd0044dn%40googlegroups.com.
