Hello, I need help with the Bresser 6in1 Pro Wifi. (sends data to WeatherUnderground). Unfortunatelly it is the "stupid" not FINEOffset version, so I have to use the interceptor, but I'm unable to get the interceptor working. I'm really unhappy with WU (now they even dont let you download your own data!) and thats why I will use weewx. By the way - this whole raspbian, linux,... thing is also new to me, so I struggle with this all and can only do things I found on the internet. So please, in case you write back, dont think I know anything - tell me like I'm a litte kid or so ;)
My setup: Bresser Weather 6in1 Pro WiFi (the one with the display) (IP 192.168.188.60- I guess, because the Bresser configuration site is here) Raspberry Pi3 (with weewx, interceptor and apache) Fritz.Box as router IPs: Bresser Weather IP 192.168.188.60 (I guess, because the Bresser configuration site is here) Raspbi IP LAN 192.168.188.34, IP WLan 192.168.188.35 (raspbiweather.fritz.box also works) FritzBox IP (as gateway?) 192.168.188.1 The problem: I permanently get this error: pi@raspbiWeather:~ $ sudo /etc/init.d/weewx status ● weewx.service - LSB: weewx weather system Loaded: loaded (/etc/init.d/weewx; generated) Active: active (exited) since Sun 2021-01-17 13:50:40 GMT; 3s ago Docs: man:systemd-sysv-generator(8) Process: 2410 ExecStart=/etc/init.d/weewx start (code=exited, status=0/SUCCESS) Jän 17 13:50:40 raspbiWeather python3[2426]: weewx[2426] CRITICAL weewx.engine: **** self._server = Consumer.TCPServer(address, port, handler) Jän 17 13:50:40 raspbiWeather python3[2426]: weewx[2426] CRITICAL weewx.engine: **** File "/usr/share/weewx/user/interceptor.py", line 584, in __init__ Jän 17 13:50:40 raspbiWeather python3[2426]: weewx[2426] CRITICAL weewx.engine: **** TCPServer.__init__(self, (address, int(port)), handler) Jän 17 13:50:40 raspbiWeather python3[2426]: weewx[2426] CRITICAL weewx.engine: **** File "/usr/lib/python3.7/socketserver.py", line 452, in __init__ Jän 17 13:50:40 raspbiWeather python3[2426]: weewx[2426] CRITICAL weewx.engine: **** self.server_bind() Jän 17 13:50:40 raspbiWeather python3[2426]: weewx[2426] CRITICAL weewx.engine: **** File "/usr/lib/python3.7/socketserver.py", line 466, in server_bind Jän 17 13:50:40 raspbiWeather python3[2426]: weewx[2426] CRITICAL weewx.engine: **** self.socket.bind(self.server_address) Jän 17 13:50:40 raspbiWeather python3[2426]: weewx[2426] CRITICAL weewx.engine: **** OSError: [Errno 99] Die angeforderte Adresse kann nicht zugewiesen werden Jän 17 13:50:40 raspbiWeather python3[2426]: weewx[2426] CRITICAL __main__: Unable to load driver: [Errno 99] Die angeforderte Adresse kann nicht zugewiesen werden Jän 17 13:50:40 raspbiWeather python3[2426]: weewx[2426] CRITICAL __main__: **** Exiting... So that " Die angeforderte Adresse kann nicht zugewiesen werden" means in english "The requested address cannot be assigned". I think that the IP address of the PWS is wrong or so? If I do (didn't know what the commands exactly do, but found this on another help thread of some user) "sudo tcpdump -Anpl -s0 -w - -i eth0 src 192.168.188.60 | stdbuf -oL strings -n8", I get (after a few seconds waiting and Cntr+C) this: tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes _services 3881D711F7A3-mysimplelink 3881D711F7A3-mysimplelink 3881D711F7A3-mysimplelink ^C2 packets captured 2 packets received by filter 0 packets dropped by kernel " 3881D711F7A3-mysimplelink" is the Bresser PWS on the Fritzbox. Pakets received are sometimes more, sometimes less. I guess that the PWS sends every 10 secs or so, and thats why. So is this correct? Than why it doesn't work? In the weewx config I have: station_type = Interceptor ############################################################################## [Interceptor] # This section is for the network traffic interceptor driver. # The driver to use: driver = user.interceptor #device_type = lw30x device_type = wu-client #mode = sniff address = 192.168.188.60 #port = 80 ############################################################################## Port is with "#" because I dont know the port and the the query above only works without " and port 80". Please be so kind and help. BR, Steinwolf -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/839f388e-4b53-4233-87b4-63019e79395cn%40googlegroups.com.