Did you make it work? I received a WS1040 station last Christmas and I wanted to connect it to weewx. Thank you!
On Tuesday, 29 January 2019 at 13:18:36 UTC+1 mwall wrote: > On Tuesday, January 29, 2019 at 5:14:32 AM UTC-5, Wifi75 wrote: >> >> at each time I have already installed everything. >> just a problem I can not understand this important command to be given: >> # see how the sensor data from rtl_433 are mapped to fully-qualified names >> sudo PYTHONPATH = / usr / share / weewx python >> /usr/share/weewx/user/sdr.py --cmd = "rtl_433 -M utc -F json -G" >> >> weewx is installed on raspberry in home / weewx >> can you help me to understand the correct command to execute? >> > > please read the wiki page about paths: > > https://github.com/weewx/weewx/wiki/Understanding-paths > > assuming that rtl_433 works properly, and if you installed using setup.py > to /home/weewx, and if your rtl_433 command is the invocation described in > the sdr guide, then you probably want something like this: > > sudo PYTHONPATH=/home/weewx/bin python /home/weewx/bin/user/sdr.py > --cmd="rtl_433 -M utc -F json -G" > > m > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/e28533ee-64e5-44a0-9489-e6860c75f5d4n%40googlegroups.com.
