ok :) thanks ! On Saturday, January 23, 2021 at 7:23:40 PM UTC+1 jo...@johnkline.com wrote:
> > I really fail to understand why the doc says to do that... > > When freshly installing weewx, it is not possible to choose a driver > UNLESS it comes with weewx. But you need to pick something, so the doc > says to pick simulator. Once you install the wmr200 driver, you want to > switch to using the wmr200 driver and forget about the simulator forever > (unless you install weewx from scratch again). > > On Jan 23, 2021, at 10:17 AM, Invisible Man <axelle....@gmail.com> wrote: > > > > > You are seeing dummy data from the simulator. > > Hmmm... that's what I was starting to understand. > I really fail to understand why the doc says to do that... > A bit lost there, but as @tke said, I've run "sudo wee_config > --reconfigure --driver=user.wmr200 --no-prompt" again and that removed the > Simulator option. > > So now, I have station_type = WMR200 > > and > > [WMR200] > # This section is for the Oregon Scientific WMR200 > > # The station model, e.g., WMR200, WMR200A, Radio Shack W200 > model = WMR200 > > # The driver to use: > driver = user.wmr200 > > > and the data looks better :=) I'm waiting through a cycle to see if data > is okay + reports too... > > > On Saturday, January 23, 2021 at 6:49:42 PM UTC+1 jo...@johnkline.com > wrote: > >> I meant to say station_type. >> >> You do not want: >> station_type = Simulator >> >> You are seeing dummy data from the simulator. >> >> On Jan 23, 2021, at 9:43 AM, Invisible Man <axelle....@gmail.com> wrote: >> >> >> >> > sudo wee_config --reconfigure --driver=user.wmr200 --no-prompt >> >> I have to do it after an apt upgrade weewx ? >> >> Anyway, I did do it again. >> It changes station_type to WMR200 (not Simulator) again. >> Is that normal ? >> >> >> On Saturday, January 23, 2021 at 6:25:46 PM UTC+1 tke...@gmail.com wrote: >> >>> Did you do step #4? >>> >>> sudo wee_config --reconfigure --driver=user.wmr200 --no-prompt >>> >>> >>> On Sat, Jan 23, 2021 at 9:16 AM Invisible Man <axelle....@gmail.com> >>> wrote: >>> >>>> > I’m not sure why you keep mentioning simulator (as in >>>> extension/simulator). >>>> >>>> Because the doc https://github.com/weewx/weewx-wmr200 says "Install >>>> WeeWX, selecting 'Simulator' driver. See directions at >>>> http://weewx.com/docs/usersguide.htm#installing" >>>> >>>> >driver = simulator >>>> >>>> No, I don't have "driver = simulator", but I have: >>>> >>>> station_type = Simulator >>>> >>>> [Simulator] >>>> driver = weewx.drivers.simulator >>>> >>>> Is that normal ? >>>> >>>> On Saturday, January 23, 2021 at 5:58:38 PM UTC+1 jo...@johnkline.com >>>> wrote: >>>> >>>>> I’m not sure why you keep mentioning simulator (as in >>>>> extension/simulator). >>>>> >>>>> Do you have the following line in your weewx.conf? >>>>> >>>>> driver = simulator >>>>> >>>>> If so, it should not be there. >>>>> >>>>> On Jan 23, 2021, at 8:49 AM, Invisible Man <axelle....@gmail.com> >>>>> wrote: >>>>> >>>>> >>>>> >>>>> Hello, >>>>> >>>>> My outside temperature, my barometer, my dew point, my gust wind are >>>>> completely crazy! >>>>> >>>>> Important: this happened after an upgrade from 4.2.0 to 4.3.0, where I >>>>> had to install the WMR200 extension as it is no longer in the main weewx >>>>> in >>>>> 4.3.0. So please consider something might be wrong with my config for the >>>>> extension/simulator. >>>>> >>>>> Also, I used to use Python 2.7 and have shifted to Python 3.x. So, >>>>> that also might be a source of issue. >>>>> >>>>> My configuration is : >>>>> >>>>> - WMR200 station (using weewx-wmr200 extension) >>>>> - My original WMR200 temperature sensor is KO and I have >>>>> "replaced" it with a DIY sensor that sends its data using MQTT. Thus >>>>> the >>>>> MQTT extension. >>>>> - My wind battery and my UV battery are low (but I wonder if it's >>>>> not just a detection issue, because they are always low even when I >>>>> change >>>>> batteries). >>>>> - I attach my weewx.conf >>>>> >>>>> >>>>> *Temperature: * >>>>> >>>>> The current outside temperature is 9°C. You see below that I receive a >>>>> MQTT message saying it is 9.14. Unit is degrees celsius. This is okay. >>>>> >>>>> Jan 23 17:10:22 vegan weewx[18515] DEBUG user.MQTTSubscribe: (Service) >>>>> MessageCallbackProvider data-> incoming topic: temperature/jardin, QOS: >>>>> 0, >>>>> retain: 0, payload: b'9.14' >>>>> Jan 23 17:10:22 vegan weewx[18515] DEBUG user.MQTTSubscribe: (Service) >>>>> TopicManager data-> incoming temperature/jardin: outTemp: 9.14 >>>>> Jan 23 17:10:24 vegan weewx[18515] DEBUG user.MQTTSubscribe: (Service) >>>>> TopicManager data-> outgoing temperature/jardin: dateTime: >>>>> 1611418222.9963524, outTemp: 9.14, usUnits: 16 >>>>> >>>>> I also have an 'accumulated temperature'. Don't know exactly what that >>>>> is, and I'm surprised usUnits is 1. Strange. >>>>> >>>>> Jan 23 17:10:24 vegan weewx[18515] DEBUG user.MQTTSubscribe: (Service) >>>>> TopicManager data-> outgoing accumulated temperature/jardin: dateTime: >>>>> 1611418225.0, outTemp: 48.452, usUnits: 1 >>>>> >>>>> A bit later, I have this kind of messages: >>>>> >>>>> - outTemp is 48.452. For some reason, this is Fahrenheit. Indeed >>>>> 48.452F=9C. >>>>> >>>>> Jan 23 17:10:24 vegan weewx[18515] DEBUG user.MQTTSubscribe: (Service) >>>>> data-> final packet is 2021-01-23 17:10:25 CET (1611418225): barometer: >>>>> 31.042868851248706, consBatteryVoltage: 12.564392224893147, dateTime: >>>>> 1611418225.0, heatingVoltage: 12.0, inHumidity: 27.78003341310109, >>>>> inTemp: >>>>> 64.10998329344946, inTempBatteryStatus: 0, outHumidity: >>>>> 78.28606553746118, >>>>> outTemp: 48.452, outTempBatteryStatus: 0, pressure: 31.042868851248706, >>>>> radiation: 46.14176895043754, rain: 0, rainBatteryStatus: 0, >>>>> referenceVoltage: 12.0, rxCheckPercent: 36.11042934389155, supplyVoltage: >>>>> 12.0, txBatteryStatus: 0, usUnits: 1, UV: 0.6459847653061255, >>>>> windBatteryStatus: 0, windDir: 349.7163932247671, windGust: >>>>> 0.34278689250776395, windGustDir: 349.7163932247671, windSpeed: >>>>> 0.28565574375646996 >>>>> >>>>> My report in my template displays $current.outTemp to "-0.9°C" !!! >>>>> This not 9C, nor 48F :( >>>>> >>>>> *Barometer* >>>>> >>>>> On the WMR console, barometer indicates approx 980 mbar. >>>>> Why does this log say 31??? Other unit? >>>>> >>>>> Jan 23 17:10:24 vegan weewx[18515] DEBUG user.MQTTSubscribe: (Service) >>>>> data-> final packet is 2021-01-23 17:10:25 CET (1611418225): barometer: >>>>> 31.042868851248706, >>>>> >>>>> My report displays $current.barometer to 1053 mbar !!! This is not 980 >>>>> !! >>>>> >>>>> *Wind gust* >>>>> >>>>> I have currently 3/5 km/h. But my report says 0 km/h. It could happen >>>>> that at a given time it is zero, but still I am suspicious about the >>>>> value. >>>>> >>>>> I think there's a configuration issue somewhere in my files. This is >>>>> crazy. >>>>> >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to weewx-user+...@googlegroups.com. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/477cec36-536b-4d10-a095-ebc732e09548n%40googlegroups.com >>>>> >>>>> <https://groups.google.com/d/msgid/weewx-user/477cec36-536b-4d10-a095-ebc732e09548n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> <weewx.conf> >>>>> >>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to weewx-user+...@googlegroups.com. >>>> >>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/6a24ee31-18e1-4c6f-93a3-bde38084b3b0n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/6a24ee31-18e1-4c6f-93a3-bde38084b3b0n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com. >> >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/a3efc5ac-c3cc-4a81-9299-189a3141ef94n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/a3efc5ac-c3cc-4a81-9299-189a3141ef94n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+...@googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/b2bbb5b2-9bd9-4c6a-b32f-4e927de7d5c8n%40googlegroups.com > > <https://groups.google.com/d/msgid/weewx-user/b2bbb5b2-9bd9-4c6a-b32f-4e927de7d5c8n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/3c5c5ad9-aaed-467f-b475-b5c31d65462dn%40googlegroups.com.