Congratulations !
It is how it is .... - and, unless you do a factory reset, you won't
have to do this again.
For "general" FineOffset clone issues etc., WXforum is afaik the main
(in the sense most substantial) forum - for weewx there are some helpful
posts, too - but here is the main weewx user forum.
With the GW1000/WH2650
in weewx.conf you will have to add the line
------------------ start weewx.conf excerpt ------------------
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
*radiation = luminosity/126.7 if luminosity is not None else None*
---------------- end weewx.conf excerpt
otherwise you won't get data from a solar sensor displayed
Good luck - and have fun !
On 21.03.2021 14:48, Auchtermuchty Weather wrote:
Thanks, I knew I'd seen something about this but forgot about the
other forum.
That worked, but what a horrible method! A better way (in my view)
would be it picks up the network itself and has an inbuilt HTTP server
for any further configuration. I guess the prevalence of mobile
devices is affecting things, adversely IMHO - a mobile device is
perfectly capable of picking up data from an IP address...
I've given it a static IP, cycled the power and it's back on the
network with the right static IP. The new IP also shows in WS View
and on looking though the screens in WS View it looks like I have some
new data to play with, plus humidity looks about right so I imagine
the dew point will be.
Now to implement connecting to it from WeeWx...
On Sunday, 21 March 2021 at 13:12:59 UTC lang....@googlemail.com wrote:
You can go through the instructions/suggestions posted at
https://www.wxforum.net/index.php?topic=41575.0
<https://www.wxforum.net/index.php?topic=41575.0>
this works in 99.5% of all cases so far. 😁
From what I read, your main issue might be
that you probably use the wrong app (probably wrongly stated in
the reseller manual) - you have to use the WSView app - WS Tools
won't work for that purpose
On 21.03.2021 13:37, Auchtermuchty Weather wrote:
PS I've tried a reset just now, no idea at what point in the
flashing I should let the button go but again I have both sensors
connected but it's not connecting to the WiFi
On Sunday, 21 March 2021 at 12:25:13 UTC Auchtermuchty Weather wrote:
GW1000 - the tiny little thing with blue LEDs. Certainly not
a console.
On Sunday, 21 March 2021 at 12:18:10 UTC steep...@gmail.com
wrote:
Do you have a gateway device GW1000 or a console?
On Sun, 21 Mar 2021 at 12:03, Auchtermuchty Weather
<shunr...@gmail.com> wrote:
So my WH2650 clone eventually arrived and is
installed in the garden. However can't get the base
station to connect to my router. I've plugged it in,
it's connected to indoor & outdoor sensors but the
WiFi light continues to flash rapidly. I've turned
off the 5GHz Wifi, I've got the WS Tool app. And the
App won't let me put the SSID in either. If just has
'<Unknown SSID>'.
However I see what is meant by better sensors etc.
Should have done this bit before I turned off the old
one.
--
You received this message because you are subscribed
to the Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving
emails from it, send an email to
weewx-user+...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/73707865-d69c-4a18-8709-02142dae07dbn%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/73707865-d69c-4a18-8709-02142dae07dbn%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the
Google Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to weewx-user+...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/8a2e3a7e-399d-41e4-8dbc-9cbcedea100dn%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/8a2e3a7e-399d-41e4-8dbc-9cbcedea100dn%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google
Groups "weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to weewx-user+unsubscr...@googlegroups.com
<mailto:weewx-user+unsubscr...@googlegroups.com>.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/44dbd146-5a51-486a-a592-aa6bd021dec9n%40googlegroups.com
<https://groups.google.com/d/msgid/weewx-user/44dbd146-5a51-486a-a592-aa6bd021dec9n%40googlegroups.com?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/df4ea013-01da-336b-e7b0-f1b4176fe38b%40gmail.com.