I've just run through those instructions here and it works for me.
What directory are you in, the one that you are running that command
from? Does it contain the file weewx-previmeteo-v0.1.tar.gz ?
wee_extension is running okay, it just complains about a read error
for the target file - "file could not be opened successfully". Meaning
it can't read (or find) the file that you've specified (which is your
current directory).
Give the full path to that file... eg:-
/where/it/was/stored/weewx-previmeteo-v0.1.tar.gz
There is an odd chance that the downloaded file is corrupt, but my
first instinct is that it literally can't find the file with the
instruction you gave it.
On 01/07/2022, rkluding...@gmail.com <rkluding...@gmail.com> wrote:
> Well here are the two attempts…. All the other extensions worked fine for me
> (I did have to use sudo for those as well) but they were all zip files. As
> this one is a ‘tar.gz’ am I missing the utility for doing so on my rpi
> maybe? – or I was searching around and is it possible someone tried to
> compress it twice?
>
>
>
> pi@kruse-pi:~ $ sudo wee_extension --install weewx-previmeteo-v0.1.tar.gz
>
> Request to install 'weewx-previmeteo-v0.1.tar.gz'
>
> Extracting from tar archive weewx-previmeteo-v0.1.tar.gz
>
> Traceback (most recent call last):
>
> File "/usr/share/weewx/wee_extension", line 92, in <module>
>
> main()
>
> File "/usr/share/weewx/wee_extension", line 84, in main
>
> ext.install_extension(options.install)
>
> File "/usr/share/weewx/weecfg/extension.py", line 122, in
> install_extension
>
> member_names = weecfg.extract_tar(extension_path,
>
> File "/usr/share/weewx/weecfg/__init__.py", line 1805, in extract_tar
>
> tar_archive = tarfile.open(filename, mode='r')
>
> File "/usr/lib/python3.9/tarfile.py", line 1616, in open
>
> raise ReadError("file could not be opened successfully")
>
> tarfile.ReadError: file could not be opened successfully
>
>
>
> pi@kruse-pi:~ $ sudo /home/weewx/bin/wee_extension --install
> weewx-previmeteo-v0.1.tar.gz
>
> sudo: /home/weewx/bin/wee_extension: command not found
>
>
>
> -Kruse
>
> 📱(M): <tel:+1.201.925.4410> +1.201.925.4410
>
> 📞(O): <tel:+1.201.857.8307> +1.862.308.7040
>
> 📞(H): <tel:+1.201.857.8307> +1.201.857.8307
>
> 📠(F): <tel:+1.201.857.7718> +1.201.857.7188
>
>
>
> From: rkluding...@gmail.com <rkluding...@gmail.com>
> Sent: Thursday, June 30, 2022 10:35 PM
> To: 'weewx-user@googlegroups.com' <weewx-user@googlegroups.com>
> Subject: RE: [weewx-user] Re: Unable to publish to previmeteo
>
>
>
> I’ll give them both a shot - thanks
>
>
>
> -Kruse
>
> 📱(M): <tel:+1.201.925.4410> +1.201.925.4410
>
> 📞(O): <tel:+1.201.857.8307> +1.862.308.7040
>
> 📞(H): <tel:+1.201.857.8307> +1.201.857.8307
>
> 📠(F): <tel:+1.201.857.7718> +1.201.857.7188
>
>
>
> From: weewx-user@googlegroups.com <mailto:weewx-user@googlegroups.com>
> <weewx-user@googlegroups.com <mailto:weewx-user@googlegroups.com> > On
> Behalf Of vince
> Sent: Thursday, June 30, 2022 10:20 PM
> To: weewx-user <weewx-user@googlegroups.com
> <mailto:weewx-user@googlegroups.com> >
> Subject: [weewx-user] Re: Unable to publish to previmeteo
>
>
>
> If you did a package install of weewx, try "sudo wee_extension --install
> weewx-previmeteo-v0.1.tar.gz", assuming you are in the same working
> directory as the .tar.gz file
>
>
>
> If you did a setup.py install of weewx, it would be "sudo
> /home/weewx/bin/wee_extension --install weewx-previmeteo-v0.1.tar.gz"
>
>
>
> On Thursday, June 30, 2022 at 7:00:50 PM UTC-7 rklud...@gmail.com
> <mailto:rklud...@gmail.com> wrote:
>
> Regarding this:
>
> https://github.com/previmeteo/weewx-previmeteo#readme
>
> Running this:
>
> setup.py install --extension weewx-previmeteo-v0.1.tar.gz
>
> ends up giving me this error:
>
> bash: setup.py: command not found
>
> So I also tried….
>
> python3 setup.py install --extension weewx-previmeteo-v0.1.tar.gz
>
> which gives me a similar error about not being able to fins setup.py
>
> FYI, there are about a gazillion “setup.py” files all over my machine – all
> different sizes - but none in any weewx directory I can find –
>
> Thoughts? Anyone publishing to previmeteo?
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "weewx-user" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/weewx-user/WN4vQOyNFrQ/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> weewx-user+unsubscr...@googlegroups.com
> <mailto:weewx-user+unsubscr...@googlegroups.com> .
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/76727a09-c125-4f57-bd4a-26df9cb66df4n%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/76727a09-c125-4f57-bd4a-26df9cb66df4n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/001801d88cf5%24464a72f0%24d2df58d0%24%40gmail.com.
>
--
Cheers
Glenn
rorpi - read only raspberry pi & various weewx addons
https://github.com/glennmckechnie
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/CAAraAzg_KJSWE0Q00DUnCi%2BwLRk%3Dh_Y91D0chq8jhr8%2BdvnBHw%40mail.gmail.com.
