No, no need for anything other than the in-built driver. Pretty self explanatory once you config with the Davis driver.
############################################################################## [Vantage] # This section is for the Davis Vantage series of weather stations. # Connection type: serial or ethernet # serial (the classic VantagePro) # ethernet (the WeatherLinkIP or Serial-Ethernet bridge) type = ethernet # If the connection type is serial, a port must be specified: # Debian, Ubuntu, Redhat, Fedora, and SuSE: # /dev/ttyUSB0 is a common USB port name # /dev/ttyS0 is a common serial port name # BSD: # /dev/cuaU0 is a common serial port name port = /dev/ttyUSB0 # If the connection type is ethernet, an IP Address/hostname is required: host = 10.10.10.10 ###################################################### # The rest of this section rarely needs any attention. # You can safely leave it "as is." ###################################################### # Serial baud rate (usually 19200) baudrate = 19200 # TCP port (when using the WeatherLinkIP) tcp_port = 22222 # TCP send delay (when using the WeatherLinkIP): tcp_send_delay = 0.5 # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 = both loop_request = 3 # The id of your ISS station (usually 1). If you use a wind meter connected # to a anemometer transmitter kit, use its id iss_id = 1 # How long to wait for a response from the station before giving up (in # seconds; must be greater than 2) timeout = 4 # How long to wait before trying again (in seconds) wait_before_retry = 1.2 # How many times to try before giving up: max_tries = 4 # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2 model_type = 2 # The driver to use: driver = weewx.drivers.vantage ############################################################################## On Wednesday, November 16, 2022 at 12:30:00 PM UTC-5 Kev D wrote: > Hi Gary, > > I have just upgraded my setup to VP2, WifiLogger2, and Belchertown skin > as well. Would you mind sharing your configuration setup in weewx to grab > data from the WifiLogger2? Are you also using the interceptor driver for > this config? > > Thanks! > > On Friday, February 11, 2022 at 9:00:57 AM UTC-5 gary....@gmail.com wrote: > >> With the rapid succession of releases, I just wanted to say that my >> upgrade to 4.6.2 went well and all is working with the VP2, WifiLogger2, >> and Belchertown skin. >> >> Thanks for an amazing system! >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/ac88d0b0-6adf-4048-8359-b031954f188an%40googlegroups.com.