Did you ever find a solution to this? I also have the Rapidfire enabled and have a 10s interval but the pressure only appears on WU every 30 or seconds for a brief period of time too. https://www.wunderground.com/dashboard/pws/KTXAUSTI2863
thanks On Saturday, February 26, 2022 at 7:14:06 AM UTC-6 rory.g...@googlemail.com wrote: > I meant to say, WeatherLinkLiveUDP is set to 10s interval, it makes no > difference at 30s, so I assume the UDP packets from WLL only send the > pressure every 30 seconds or so. > > On Saturday, February 26, 2022 at 12:42:05 PM UTC Rory Gillies wrote: > >> Hi, >> >> I am using the WeatherLinkLiveUDP driver with Weewx to access my David >> Vantage Pro2 Plus station. Everything works a treat (you can see my weather >> page here using the excellent Neowx-Material skin: >> https://www.360shetland.co.uk/weather/index.html >> >> I upload to PWS Weather, Windy, and Weather Underground using the >> rapidfire mode. I had an issue with wind speed being higher than wind gust >> speed which I have fixed, however the pressure value only seems to be >> updated every 30 seconds rather than with each loop. My WU Rapid station is >> here: https://www.wunderground.com/dashboard/pws/ISHETL39/ >> >> Is there any way to append the pressure value to the loop data that is >> uploaded? Although the pressure is recorded and can be seen in the station >> current condition, the pressure dial disappears for 30 seconds then appears >> briefly until the next loop packet is uploaded. It's not the end of the >> world, but I would like the pressure dial to be there all the time. >> >> Thanks, >> >> Rory >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/59775c70-2ae4-48b3-a245-81caa7e04cd5n%40googlegroups.com.
