I knew no other solution than to rape the HP thin client with a windows operating system I had long forgotten. That worked! Then quickly installed Linux again.
Op maandag 9 januari 2023 om 18:28:56 UTC+1 schreef jschoonh: > Is there anyone who can point me in the right direction please? > > I have tried to read the ws-28xx driver and now I understand a bit about > the US or EU frequency. But I do not understand that EU is read with base > frequency: 868300000, after reading the USB dongle requency correction: > 95368 is found. (I think I also understand that each dongle has its own > frequency?) But then adjusted frequency: suddenly 910573909? Where does > that come from? That looks more like a US base of 905000000 and then > corrected. Although that is also more than the 95368. > I'm stuck at the moment, just like last time, I can't get Weewx to work. > Last time a rain issue that could not be solved. > > Op vrijdag 6 januari 2023 om 22:01:17 UTC+1 schreef jschoonh: > >> I'm trying to make a new start but this time in the Netherlands. >> Bought a WS 2818 and commissioned it without any problems. >> A thin client t620 with a small linux mint that works fine and is >> connected to the internet. >> But the USB dongle won't pair with the console. >> Temporarily installed weewx on a laptop with the console right next to >> it. But with the same results. >> The USB dongle is seen, the console shows "PC" after pressing "V". >> What I don't understand why the frequency is changed from 868300000 to >> 910573909 ? could that be the problem? >> Here below the printout of the laptop's terminal and part of the syslog. >> Can anyone give me any suggestions? >> >> >> >> sudo wee_device --pair >> >> Using configuration file /etc/weewx/weewx.conf >> >> Using WS28xx driver version 0.51 (weewx.drivers.ws28xx) >> >> Pairing transceiver with console... >> >> Press and hold the [v] key until "PC" appears (attempt 1 of 3) >> >> Press and hold the [v] key until "PC" appears (attempt 2 of 3) >> >> Press and hold the [v] key until "PC" appears (attempt 3 of 3) >> >> Transceiver not paired to console. >> >> Jan 6 21:40:36 jjs-SATELLITE-PRO-A50-C wee_device[84881] INFO >> weewx.drivers.ws28xx: driver version is 0.51 >> >> Jan 6 21:40:36 jjs-SATELLITE-PRO-A50-C wee_device[84881] INFO >> weewx.drivers.ws28xx: frequency is EU >> >> Jan 6 21:40:36 jjs-SATELLITE-PRO-A50-C wee_device[84881] INFO >> weewx.drivers.ws28xx: found transceiver at bus= device= >> >> Jan 6 21:40:36 jjs-SATELLITE-PRO-A50-C wee_device[84881] INFO >> weewx.drivers.ws28xx: manufacturer: b'LA CROSSE TECHNOLOGY' >> >> Jan 6 21:40:36 jjs-SATELLITE-PRO-A50-C wee_device[84881] INFO >> weewx.drivers.ws28xx: product: b'Weather Direct Light Wireless Device' >> >> Jan 6 21:40:36 jjs-SATELLITE-PRO-A50-C wee_device[84881] INFO >> weewx.drivers.ws28xx: interface: 0 >> >> Jan 6 21:40:36 jjs-SATELLITE-PRO-A50-C wee_device[84881] INFO >> weewx.drivers.ws28xx: base frequency: 868300000 >> >> Jan 6 21:40:36 jjs-SATELLITE-PRO-A50-C wee_device[84881] INFO >> weewx.drivers.ws28xx: frequency correction: 95368 (0x17488) >> >> Jan 6 21:40:36 jjs-SATELLITE-PRO-A50-C wee_device[84881] INFO >> weewx.drivers.ws28xx: adjusted frequency: 910573909 (0x36464155) >> >> Jan 6 21:40:36 jjs-SATELLITE-PRO-A50-C wee_device[84881] INFO >> weewx.drivers.ws28xx: transceiver identifier: 256 (0x0100) >> >> Jan 6 21:40:36 jjs-SATELLITE-PRO-A50-C wee_device[84881] INFO >> weewx.drivers.ws28xx: transceiver serial: 01022206180100 >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/40d534ce-b7f0-434d-883b-b6f39a8bbe0cn%40googlegroups.com.