Hi, thats sounds good, and sqlightbrowser tells me the BatterieStatus fiels are empty, most likely a type mismatch as you say. Just wonder, if I map wh51_ch1_batt to * BatteryStatus2*, I need to mention * BatteryStatus2* in extension.py. righ?
Rainer Lang schrieb am Donnerstag, 10. August 2023 um 12:51:54 UTC+2: > in principle all seems to be correct in weewx.conf > > now, how to check the database: get yourself the sqlitebrowser and look it > up yourself > > sudo apt-get install sqlitebrowser > > you will have to load your database and you can see everything, all > records etc. > > but you may have a unit problem as the Ecowitt battery status comes over > either as integer values (0, 1, 2, 3) or as voltage e.g. 1.64 > > As far as I know Gary has described this in the Ecowitt Gateway WiKi > > therefore the units to be used (which may be different from > wsview_extended schema) need to be added to > extensions.py > > https://github.com/gjr80/weewx-gw1000/wiki/Sensor-battery-states > > and make sure you have the respective entries in your extension.py > > e.g. > weewx.units.obs_group_dict['wh51_ch1_batt'] = 'group_volt' > weewx.units.obs_group_dict['wn34_ch1_batt'] = 'group_volt' > > and > weewx.units.obs_group_dict['wh31_ch1_batt'] = 'group_count' > etc. > > the signal levels should also belong to group_count > > try that ... > > > On 10.08.2023 10:48, Daidl Himself wrote: > > Hi, > I got a GW2000 and several sensors and use them with the gw1000 driver. So > far so good, the most temeratures and stuff is automatically logged fine. > But, I would like to see trends from the battery values as well. Searching > in the manuals let me learn, the data needs to be mapped to a field, either > creating new ones, or map to existing ones, which are "free". So, I checked > the "schemas.wview_extended.schema" that is used an made some mappings in > the weewx.conf: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > *[GW1000] # This section is for the Ecowitt Gateway driver. # > How often to poll the API, default is every 20 seconds: poll_interval = > 20 # The driver to use: driver = user.gw1000 ip_address = > 192.168.179.113 port = 45000 show_all_batt = True > [[field_map_extensions]] extraTemp8 = temp9 rain = > p_rain stormRain = p_rainevent rainRate = p_rainrate > dayRain = p_rainday weekRain = p_rainweek monthRain = > p_rainmonth yearRain = p_rainyear BatteryStatus1 = > ws90_batt BatteryStatus2 = wh51_ch1_batt BatteryStatus3 = > wh51_ch2_batt BatteryStatus4 = wn34_ch1_batt BatteryStatus5 = > wh45_batt BatteryStatus6 = wh75_ch1_batt signal1 = ws90_sig > signal2 = wh51_ch1_sig signal3 = wh51_ch2_sig signal4 = > wn34_ch1_sig signal5 = wh45_sig signal6 = wh31_ch1_sig signal7 > = wh31_ch2_sig signal8 = wh31_ch3_sig* > > The Temperature and the rain data is all fine, but the battery data can be > shown as $latest and $current, but the image generator just produced empty > fields. Looks for me, as the "BatteryStatus" fields are not storred in the > database. How can I advice this, and how can I check if there are already > part of a group (I would guess energy would make sense, as the value is > Volt) > > thanks a lot by the way, for this fantastic peace of software and user > friendly documentation. > > > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/437461fd-ddf9-49c6-a10b-a8ba8737690fn%40googlegroups.com > > <https://groups.google.com/d/msgid/weewx-user/437461fd-ddf9-49c6-a10b-a8ba8737690fn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/002dccfa-1e56-4c8d-8cdb-44fbd8e9285cn%40googlegroups.com.