Hi Ian
Thanks for looking.
I used this command to install WeeWx:
sudo apt install ./python3-weewx_5.0.0a24-a_all.deb
and this command to install GW1000
sudo weectl extension install
https://github.com/gjr80/weewx-gw1000/releases/download/v0.5.0b5/gw1000-0.5.0b5.tar.gz
>From syslog:
Aug 15 10:36:01 raspberrypi weewx[677] INFO weewx.engine: Loading station
type GW1000 (user.gw1000)
Aug 15 10:36:01 raspberrypi weewx[677] CRITICAL __main__: Caught
unrecoverable exception:
Aug 15 10:36:01 raspberrypi weewx[677] CRITICAL __main__: **** No
module named 'user.gw1000'
Aug 15 10:36:01 raspberrypi weewx[677] CRITICAL __main__: ****
Traceback (most recent call last):
Aug 15 10:36:01 raspberrypi weewx[677] CRITICAL __main__: **** File
"/usr/share/weewx/weewxd.py", line 149, in main
Aug 15 10:36:01 raspberrypi weewx[677] CRITICAL __main__: ****
engine = weewx.engine.StdEngine(config_dict)
Aug 15 10:36:01 raspberrypi weewx[677] CRITICAL __main__: **** File
"/usr/share/weewx/weewx/engine.py", line 78, in __init__
Aug 15 10:36:01 raspberrypi weewx[677] CRITICAL __main__: ****
self.setupStation(config_dict)
Aug 15 10:36:01 raspberrypi weewx[677] CRITICAL __main__: **** File
"/usr/share/weewx/weewx/engine.py", line 105, in setupStation
Aug 15 10:36:01 raspberrypi weewx[677] CRITICAL __main__: ****
__import__(driver)
Aug 15 10:36:01 raspberrypi weewx[677] CRITICAL __main__: ****
ModuleNotFoundError: No module named 'user.gw1000'
Aug 15 10:36:01 raspberrypi weewx[677] CRITICAL __main__: **** Exiting.
Aug 15 10:36:01 raspberrypi systemd[1]: weewx.service: Main process exited,
code=exited, status=1/FAILURE
Aug 15 10:36:01 raspberrypi systemd[1]: weewx.service: Failed with result
'exit-code'.
I have attached the weewx.conf file
Gert
On Tuesday, August 15, 2023 at 8:52:05 AM UTC+2 Ian Millard wrote:
> How did you attempt the install? I am running version 5 with a pip
> installation. I am also running the Gateway driver and it installed
> seamlessly using weectl extension install [URL]
>
> Sent from my iPad.
>
> On 15 Aug 2023, at 05:57, gert.a...@gmail.com <gert.a...@gmail.com> wrote:
>
> Hi Vince
>
> I followed the installation guide for the driver, but the installation
> used the folder structure from WeeWx version 4.
>
> Rgds
> Gert
>
> On Tuesday, August 15, 2023 at 1:44:12 AM UTC+2 vince wrote:
>
>> sure why wouldn't it be ?
>>
>> On Monday, August 14, 2023 at 2:03:23 PM UTC-7 gert.a...@gmail.com wrote:
>>
>>> Hi
>>> Is it possible to install the gateway with WeeWx 5.0
>>>
>>> Thanks
>>> Gert
>>>
>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/99af5f5f-3f49-441d-acf0-e4006a1e734fn%40googlegroups.com
>
> <https://groups.google.com/d/msgid/weewx-user/99af5f5f-3f49-441d-acf0-e4006a1e734fn%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/3cac5915-3b90-44f0-9f5d-e6e85ec506f4n%40googlegroups.com.
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2022 Tom Keffer <tkef...@gmail.com>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 0
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /
# Whether to log successful operations. May get overridden below.
log_success = True
# Whether to log unsuccessful operations. May get overridden below.
log_failure = True
# Do not modify this. It is used when installing and updating weewx.
version = 5.0.0b10
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = Kongens Lyngby
# Latitude in decimal degrees. Negative for southern hemisphere
latitude = 55.768663592
# Longitude in decimal degrees. Negative for western hemisphere.
longitude = 12.499998
# Altitude of the station, with the unit it is in. This is used only
# if the hardware cannot supply a value.
altitude = 33, meter
# Set to type of station hardware. There must be a corresponding stanza
# in this file, which includes a value for the 'driver' option.
station_type = GW1000
# If you have a website, you may specify an URL. This is required if you
# intend to register your station.
#station_url = http://www.example.com
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 0
##############################################################################
[Simulator]
# This section is for the weewx weather station simulator
# The time (in seconds) between LOOP packets.
loop_interval = 2.5
# The simulator mode can be either 'simulator' or 'generator'.
# Real-time simulator. Sleep between each LOOP packet.
mode = simulator
# Generator. Emit LOOP packets as fast as possible (useful for testing).
#mode = generator
# The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the default
# is to use the present time.
#start = 2011-01-01T00:00
# The driver to use:
driver = weewx.drivers.simulator
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
# Uncomment and change to override logging for uploading services.
# log_success = True
# log_failure = True
[[StationRegistry]]
# To register this weather station with weewx, set this to true,
# then fill out option 'station_url', located in the [Station] section
above.
register_this_station = False
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to post to AWEKAS, set the option 'enable' to true, then
specify a username
# and password. To guard against parsing errors, put the password in
quotes.
enable = false
username = replace_me
password = replace_me
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to post to CWOP, set the option 'enable' to true,
# then specify the station ID (e.g., CW1234).
enable = false
station = replace_me
# If this is an APRS (radio amateur) station, specify the
# passcode (e.g., 12345). Otherwise, ignore.
passcode = replace_me
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to post to PWSweather.com, set the option 'enable' to
true, then specify a
# station and password. To guard against parsing errors, put the
password in quotes.
enable = false
station = replace_me
password = replace_me
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to post to WOW, set the option 'enable' to true, then
specify a station and
# password. To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to post to the Weather Underground, set the option
'enable' to true, then
# specify a station (e.g., 'KORHOODR3') and password. To guard against
parsing errors, put
# the password in quotes.
enable = false
station = replace_me
password = replace_me
# If you plan on using wunderfixer, set the following
# to your API key:
api_key = replace_me
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = /etc/weewx/skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/html/weewx
# Uncomment and change to override logging for reports
# log_success = True
# log_failure = True
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Each of the following subsections defines a report that will be run.
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.
[[SeasonsReport]]
# The SeasonsReport uses the 'Seasons' skin, which contains the
# images, templates and plots for the report.
skin = Seasons
enable = true
[[SmartphoneReport]]
# The SmartphoneReport uses the 'Smartphone' skin, and the images and
# files are placed in a dedicated subdirectory.
skin = Smartphone
enable = false
HTML_ROOT = /var/www/html/weewx/smartphone
[[MobileReport]]
# The MobileReport uses the 'Mobile' skin, and the images and files
# are placed in a dedicated subdirectory.
skin = Mobile
enable = false
HTML_ROOT = /var/www/html/weewx/mobile
[[StandardReport]]
# This is the old "Standard" skin. By default, it is not enabled.
skin = Standard
enable = false
[[FTP]]
# FTP'ing the results to a webserver is treated as just another report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, set "enable" to "true", then
# fill out the next four lines.
# Use quotes around passwords to guard against parsing errors.
enable = false
user = replace_me
password = replace_me
server = replace_me # The ftp server name, e.g, www.myserver.org
path = replace_me # The destination directory, e.g., /weather
# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Most FTP servers use port 21
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh using
# public/private key authentication from the user account that weewx
# runs to the user account on the remote machine where the files
# will be copied.
#
# If you wish to use rsync, set "enable" to "true", then
# fill out server, user, and path.
# The server should appear in your .ssh/config file.
# The user is the username used in the identity file.
# The path is the destination directory, such as /var/www/html/weather.
# Be sure that the user has write permissions on the destination!
enable = false
server = replace_me
user = replace_me
path = replace_me
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote file
# deletion, zero to allow files to accumulate remotely.
delete = 0
# Options in the [[Defaults]] section below will apply to all reports.
# What follows are a few of the more popular options you may want to
# uncomment, then change.
[[Defaults]]
# Which language to use for all reports. Not all skins support all
languages.
# You can override this for individual reports.
lang = en
# Which unit system to use for all reports. Choices are 'us', 'metric',
or 'metricwx'.
# You can override this for individual reports.
unit_system = metricwx
[[[Units]]]
# Option "unit_system" above sets the general unit system, but
overriding specific unit
# groups is possible. These are popular choices. Uncomment and set
as appropriate.
# NB: The unit is always in the singular. I.e., 'mile_per_hour',
# NOT 'miles_per_hour'
[[[[Groups]]]]
# group_altitude = meter # Options are 'foot'
or 'meter'
# group_pressure = mbar # Options are 'inHg',
'mmHg', 'mbar', or 'hPa'
# group_rain = mm # Options are 'inch',
'cm', or 'mm'
# group_rainrate = mm_per_hour # Options are
'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
# group_temperature = degree_C # Options are
'degree_C', 'degree_F', or 'degree_K'
# The following line is used to keep the above lines indented
properly.
# It can be ignored.
unused = unused
# Uncommenting the following section frequently results in more
# attractive formatting of times and dates, but may not work in
# your locale.
[[[[TimeFormats]]]]
# day = %H:%M
# week = %H:%M on %A
# month = %d-%b-%Y %H:%M
# year = %d-%b-%Y %H:%M
# rainyear = %d-%b-%Y %H:%M
# current = %d-%b-%Y %H:%M
# ephem_day = %H:%M
# ephem_year = %d-%b-%Y %H:%M
# The following line is used to keep the above lines indented
properly.
# It can be ignored.
unused = unused
[[[Labels]]]
# Users frequently change the labels for these observation types
[[[[Generic]]]]
# inHumidity = Inside Humidity
# inTemp = Inside Temperature
# outHumidity = Outside Humidity
# outTemp = Outside Temperature
# extraTemp1 = Temperature1
# extraTemp2 = Temperature2
# extraTemp3 = Temperature3
# The following line is used to keep the above lines indented
properly.
# It can be ignored.
unused = unused
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 26, 32.5, inHg
pressure = 24, 34.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
rain = 0, 10, inch
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# How to calculate derived quantities. Possible values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
altimeter = prefer_hardware
appTemp = prefer_hardware
barometer = prefer_hardware
cloudbase = prefer_hardware
dewpoint = prefer_hardware
ET = prefer_hardware
heatindex = prefer_hardware
humidex = prefer_hardware
inDewpoint = prefer_hardware
maxSolarRad = prefer_hardware
rainRate = prefer_hardware
windchill = prefer_hardware
windrun = prefer_hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive interval
# will be downloaded from the station. Otherwise, specify it (in seconds).
archive_interval = 300
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = hardware
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# Uncomment and change to override logging for archive operations
# log_success = True
# log_failure = True
# The data binding used to save archive records
data_binding = wx_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_sqlite
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.manager.DaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview_extended.schema
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
[[archive_sqlite]]
database_name = weewx.sdb
database_type = SQLite
# MySQL
[[archive_mysql]]
database_name = weewx
database_type = MySQL
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /var/lib/weewx
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user = weewx
# The password (use quotes to guard against parsing errors)
password = weewx
##############################################################################
# This section configures the internal weewx engine.
[Engine]
# The following section specifies which services should be run and in what
order.
[[Services]]
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate,
weewx.engine.StdQC, weewx.wxservices.StdWXCalculate
xtype_services = weewx.wxxtypes.StdWXXTypes,
weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater,
weewx.wxxtypes.StdDelta
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry,
weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP,
weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
[GW1000]
# This section is for the Ecowitt Gateway driver.
# How often to poll the API, default is every 20 seconds:
poll_interval = 16
# The driver to use:
driver = user.gw1000
port = 45000
ip_address = auto
[[field_map_extensions]]
inTemp = temp1
inHumidity = humid1
[Accumulator]
# Start Ecowitt Gateway driver extractors
[[daymaxwind]]
extractor = last
[[lightning_distance]]
extractor = last
[[lightning_strike_count]]
extractor = sum
[[lightningcount]]
extractor = last
[[lightning_last_det_time]]
extractor = last
[[stormRain]]
extractor = last
[[hourRain]]
extractor = last
[[dayRain]]
extractor = last
[[weekRain]]
extractor = last
[[monthRain]]
extractor = last
[[yearRain]]
extractor = last
[[totalRain]]
extractor = last
[[p_rain]]
extractor = sum
[[p_stormRain]]
extractor = last
[[p_dayRain]]
extractor = last
[[p_weekRain]]
extractor = last
[[p_monthRain]]
extractor = last
[[p_yearRain]]
extractor = last
[[t_rain]]
extractor = sum
[[t_stormRain]]
extractor = last
[[t_dayRain]]
extractor = last
[[t_weekRain]]
extractor = last
[[_monthRain]]
extractor = last
[[t_yearRain]]
extractor = last
[[pm2_51_24h_avg]]
extractor = last
[[pm2_52_24h_avg]]
extractor = last
[[pm2_53_24h_avg]]
extractor = last
[[pm2_54_24h_avg]]
extractor = last
[[pm2_55_24h_avg]]
extractor = last
[[pm10_24h_avg]]
extractor = last
[[co2_24h_avg]]
extractor = last
[[wh40_batt]]
extractor = last
[[wh26_batt]]
extractor = last
[[wh25_batt]]
extractor = last
[[wh24_batt]]
extractor = last
[[wh65_batt]]
extractor = last
[[wh31_ch1_batt]]
extractor = last
[[wh31_ch2_batt]]
extractor = last
[[wh31_ch3_batt]]
extractor = last
[[wh31_ch4_batt]]
extractor = last
[[wh31_ch5_batt]]
extractor = last
[[wh31_ch6_batt]]
extractor = last
[[wh31_ch7_batt]]
extractor = last
[[wh31_ch8_batt]]
extractor = last
[[wn34_ch1_batt]]
extractor = last
[[wn34_ch2_batt]]
extractor = last
[[wn34_ch3_batt]]
extractor = last
[[wn34_ch4_batt]]
extractor = last
[[wn34_ch5_batt]]
extractor = last
[[wn34_ch6_batt]]
extractor = last
[[wn34_ch7_batt]]
extractor = last
[[wn34_ch8_batt]]
extractor = last
[[wn35_ch1_batt]]
extractor = last
[[wn35_ch2_batt]]
extractor = last
[[wn35_ch3_batt]]
extractor = last
[[wn35_ch4_batt]]
extractor = last
[[wn35_ch5_batt]]
extractor = last
[[wn35_ch6_batt]]
extractor = last
[[wn35_ch7_batt]]
extractor = last
[[wn35_ch8_batt]]
extractor = last
[[wh41_ch1_batt]]
extractor = last
[[wh41_ch2_batt]]
extractor = last
[[wh41_ch3_batt]]
extractor = last
[[wh41_ch4_batt]]
extractor = last
[[wh45_batt]]
extractor = last
[[wh51_ch1_batt]]
extractor = last
[[wh51_ch2_batt]]
extractor = last
[[wh51_ch3_batt]]
extractor = last
[[wh51_ch4_batt]]
extractor = last
[[wh51_ch5_batt]]
extractor = last
[[wh51_ch6_batt]]
extractor = last
[[wh51_ch7_batt]]
extractor = last
[[wh51_ch8_batt]]
extractor = last
[[wh51_ch9_batt]]
extractor = last
[[wh51_ch10_batt]]
extractor = last
[[wh51_ch11_batt]]
extractor = last
[[wh51_ch12_batt]]
extractor = last
[[wh51_ch13_batt]]
extractor = last
[[wh51_ch14_batt]]
extractor = last
[[wh51_ch15_batt]]
extractor = last
[[wh51_ch16_batt]]
extractor = last
[[wh55_ch1_batt]]
extractor = last
[[wh55_ch2_batt]]
extractor = last
[[wh55_ch3_batt]]
extractor = last
[[wh55_ch4_batt]]
extractor = last
[[wh57_batt]]
extractor = last
[[wh68_batt]]
extractor = last
[[ws80_batt]]
extractor = last
[[ws90_batt]]
extractor = last
[[wh40_sig]]
extractor = last
[[wh26_sig]]
extractor = last
[[wh25_sig]]
extractor = last
[[wh24_sig]]
extractor = last
[[wh65_sig]]
extractor = last
[[wh31_ch1_sig]]
extractor = last
[[wh31_ch2_sig]]
extractor = last
[[wh31_ch3_sig]]
extractor = last
[[wh31_ch4_sig]]
extractor = last
[[wh31_ch5_sig]]
extractor = last
[[wh31_ch6_sig]]
extractor = last
[[wh31_ch7_sig]]
extractor = last
[[wh31_ch8_sig]]
extractor = last
[[wn34_ch1_sig]]
extractor = last
[[wn34_ch2_sig]]
extractor = last
[[wn34_ch3_sig]]
extractor = last
[[wn34_ch4_sig]]
extractor = last
[[wn34_ch5_sig]]
extractor = last
[[wn34_ch6_sig]]
extractor = last
[[wn34_ch7_sig]]
extractor = last
[[wn34_ch8_sig]]
extractor = last
[[wn35_ch1_sig]]
extractor = last
[[wn35_ch2_sig]]
extractor = last
[[wn35_ch3_sig]]
extractor = last
[[wn35_ch4_sig]]
extractor = last
[[wn35_ch5_sig]]
extractor = last
[[wn35_ch6_sig]]
extractor = last
[[wn35_ch7_sig]]
extractor = last
[[wn35_ch8_sig]]
extractor = last
[[wh41_ch1_sig]]
extractor = last
[[wh41_ch2_sig]]
extractor = last
[[wh41_ch3_sig]]
extractor = last
[[wh41_ch4_sig]]
extractor = last
[[wh45_sig]]
extractor = last
[[wh51_ch1_sig]]
extractor = last
[[wh51_ch2_sig]]
extractor = last
[[wh51_ch3_sig]]
extractor = last
[[wh51_ch4_sig]]
extractor = last
[[wh51_ch5_sig]]
extractor = last
[[wh51_ch6_sig]]
extractor = last
[[wh51_ch7_sig]]
extractor = last
[[wh51_ch8_sig]]
extractor = last
[[wh51_ch9_sig]]
extractor = last
[[wh51_ch10_sig]]
extractor = last
[[wh51_ch11_sig]]
extractor = last
[[wh51_ch12_sig]]
extractor = last
[[wh51_ch13_sig]]
extractor = last
[[wh51_ch14_sig]]
extractor = last
[[wh51_ch15_sig]]
extractor = last
[[wh51_ch16_sig]]
extractor = last
[[wh55_ch1_sig]]
extractor = last
[[wh55_ch2_sig]]
extractor = last
[[wh55_ch3_sig]]
extractor = last
[[wh55_ch4_sig]]
extractor = last
[[wh57_sig]]
extractor = last
[[wh68_sig]]
extractor = last
[[ws80_sig]]
extractor = last
[[ws90_sig]]
extractor = last
