Thanks Tom, for the answer to tell the truth I'm carrying out tests on a virtual machine with Raspberry operating system with virtual box it could probably be as you say that there is some unusual hardware. I have a Raspberry Model 3 B+ and I performed my first installation with setup.py. Over time I updated Python to 3.9 and always updated Weewx. the weewx installation in my case is located in /home so if I didn't misunderstand I should do the following steps 1 - sudo apt update sudo apt install python3-pip -y sudo apt install python3-venv -y (do I have to do them from the home folder?)
2 - # Create the virtual environment python3 -m venv ~/weewx-venv # Activate the WeeWX virtual environment source ~/weewx-venv/bin/activate # Install WeeWX into the virtual environment python3 -m pip install weewx 3 - weewxd --config=/home/weewx/weewx.conf 4 - # systems with systemd # This will run weekx as you, not root. If you prefer to run as # the root user, modify the weewx.service file. sudo cp /home/weewx/util/systemd/weewx.service /etc/systemd/system sudo systemctl daemon-reload sudo systemctl enable weewx sudo systemctl start weewx 5 - How do I start weewx version 5 when starting raspberry? with this? sudo sh ~/weewx-data/scripts/setup-daemon.sh This is what I understood from the guide Il giorno martedì 16 gennaio 2024 alle 13:55:25 UTC+1 Tom Keffer ha scritto: > The library "Pillow" is required by WeeWX. Normally, it is downloaded and > installed automatically by pip, but it appears that pip cannot find a > prebuilt Pillow library. This can be for a variety of reasons, but it's > usually as simple as an outdated copy of pip. It can also be because you > are running on an unusual operating system or hardware, but it appears that > you are on a Raspberry Pi, which is very common. So, odds are the problem > is just that your copy of pip is not up to date. For details, see the wiki > article *Troubleshooting pip installs > <https://github.com/weewx/weewx/wiki/pip-troubleshooting>*. > > As suggested in the article, try updating pip > > # Activate your virtual environment: > source /home/pi/weewx-venv/bin/activate > # Update pip > python3 -m pip install pip --upgrade > # Now try installing Pillow: > python3 -m pip install Pillow > > If that works, then proceed with installing weewx. > > -tk > > > On Tue, Jan 16, 2024 at 4:28 AM Francesco Fasano <fvirg...@gmail.com> > wrote: > >> >> Hi Gary, and thanks for the reply. I read all the guides and followed all >> the instructions step by step but in the end after the command in the >> virtual environment python3 - m pip install weewx I have the following error >> >> python3 -m pip install weewx >> Looking in indexes: https://pypi.org/simple, >> https://www.piwheels.org/simple >> Requirement already satisfied: weewx in >> ./pi/weewx-venv/lib/python3.9/site-packages (5.0.0) >> Requirement already satisfied: CT3<4.0,>=3.1 in >> ./pi/weewx-venv/lib/python3.9/site-packages (from weewx) (3.3.3) >> Collecting Pillow>=5.2 (from weewx) >> Using cached pillow-10.2.0.tar.gz (46.2 MB) >> Installing build dependencies ... done >> Getting requirements to build wheel ... done >> Installing backend dependencies ... done >> Preparing metadata (pyproject.toml) ... done >> Collecting PyMySQL<2.0,>=1.0 (from weewx) >> Using cached >> https://www.piwheels.org/simple/pymysql/PyMySQL-1.1.0-py3-none-any.whl >> (44 kB) >> Requirement already satisfied: configobj<6.0,>=5.0 in >> ./pi/weewx-venv/lib/python3.9/site-packages (from weewx) (5.0.8) >> Requirement already satisfied: ephem<5.0,>=4.1 in >> ./pi/weewx-venv/lib/python3.9/site-packages (from weewx) (4.1.5) >> Requirement already satisfied: pyserial<4.0,>=3.4 in >> ./pi/weewx-venv/lib/python3.9/site-packages (from weewx) (3.5) >> Requirement already satisfied: pyusb<2.0.0,>=1.0.2 in >> ./pi/weewx-venv/lib/python3.9/site-packages (from weewx) (1.2.1) >> Requirement already satisfied: six in >> ./pi/weewx-venv/lib/python3.9/site-packages (from >> configobj<6.0,>=5.0->weewx) (1.16.0) >> Building wheels for collected packages: Pillow >> Building wheel for Pillow (pyproject.toml) ... error >> error: subprocess-exited-with-error >> >> × Building wheel for Pillow (pyproject.toml) did not run successfully. >> │ exit code: 1 >> ╰─> [203 lines of output] >> running bdist_wheel >> running build >> running build_py >> creating build >> creating build/lib.linux-x86_64-cpython-39 >> creating build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/PalmImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/MicImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/PsdImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/GimpPaletteFile.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImageFilter.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/FitsImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImageColor.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImageFile.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImageDraw2.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImageWin.py -> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImageTk.py -> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/_typing.py -> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/_util.py -> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/Hdf5StubImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/PixarImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/DdsImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/GifImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImageQt.py -> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/BlpImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImageDraw.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/WebPImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImageMath.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/PcxImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/_binary.py -> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImtImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/McIdasImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/_deprecate.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/TiffImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/PSDraw.py -> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/Jpeg2KImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/SgiImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ExifTags.py -> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/FpxImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/GbrImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/_version.py -> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/XbmImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/__init__.py -> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/_tkinter_finder.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/XVThumbImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/GimpGradientFile.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/PdfImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/XpmImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/FliImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/IcoImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImageOps.py -> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/PpmImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/WalImageFile.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImageEnhance.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/QoiImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/TiffTags.py -> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/IptcImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImagePath.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/GribStubImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/WmfImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/CurImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/PngImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImageFont.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/GdImageFile.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/PyAccess.py -> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/BufrStubImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/EpsImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImageChops.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/BdfFontFile.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/PcdImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/DcxImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/PcfFontFile.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/MspImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/features.py -> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImageTransform.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/SunImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/PaletteFile.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/FtexImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/PdfParser.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/TgaImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImagePalette.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImageCms.py -> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/SpiderImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ContainerIO.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/IcnsImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImageMorph.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/__main__.py -> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/TarIO.py -> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImageShow.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/JpegImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImageMode.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/MpegImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/FontFile.py -> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImageStat.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/MpoImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/JpegPresets.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImageSequence.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/BmpImagePlugin.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/Image.py -> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/ImageGrab.py -> >> build/lib.linux-x86_64-cpython-39/PIL >> running egg_info >> writing src/pillow.egg-info/PKG-INFO >> writing dependency_links to src/pillow.egg-info/dependency_links.txt >> writing requirements to src/pillow.egg-info/requires.txt >> writing top-level names to src/pillow.egg-info/top_level.txt >> reading manifest file 'src/pillow.egg-info/SOURCES.txt' >> reading manifest template 'MANIFEST.in' >> warning: no files found matching '*.c' >> warning: no files found matching '*.h' >> warning: no files found matching '*.sh' >> warning: no files found matching '*.txt' >> warning: no files found matching '.flake8' >> warning: no previously-included files found matching '.appveyor.yml' >> warning: no previously-included files found matching '.clang-format' >> warning: no previously-included files found matching '.coveragerc' >> warning: no previously-included files found matching '.editorconfig' >> warning: no previously-included files found matching >> '.readthedocs.yml' >> warning: no previously-included files found matching 'codecov.yml' >> warning: no previously-included files found matching 'renovate.json' >> warning: no previously-included files matching '.git*' found >> anywhere in distribution >> warning: no previously-included files matching '*.so' found >> anywhere in distribution >> no previously-included directories found matching '.ci' >> no previously-included directories found matching 'wheels' >> adding license file 'LICENSE' >> writing manifest file 'src/pillow.egg-info/SOURCES.txt' >> copying src/PIL/_imagingcms.pyi -> >> build/lib.linux-x86_64-cpython-39/PIL >> copying src/PIL/_imagingft.pyi -> >> build/lib.linux-x86_64-cpython-39/PIL >> running build_ext >> >> >> The headers or library files could not be found for jpeg, >> a required dependency when compiling Pillow from source. >> >> Please see the install instructions at: >> https://pillow.readthedocs.io/en/latest/installation.html >> >> Traceback (most recent call last): >> File "<string>", line 989, in <module> >> File >> "/tmp/pip-build-env-7ueq13bs/overlay/lib/python3.9/site-packages/setuptools/__init__.py", >> >> line 103, in setup >> return distutils.core.setup(**attrs) >> File >> "/tmp/pip-build-env-7ueq13bs/overlay/lib/python3.9/site-packages/setuptools/_distutils/core.py", >> >> line 185, in setup >> return run_commands(dist) >> File >> "/tmp/pip-build-env-7ueq13bs/overlay/lib/python3.9/site-packages/setuptools/_distutils/core.py", >> >> line 201, in run_commands >> dist.run_commands() >> File >> "/tmp/pip-build-env-7ueq13bs/overlay/lib/python3.9/site-packages/setuptools/_distutils/dist.py", >> >> line 969, in run_commands >> self.run_command(cmd) >> File >> "/tmp/pip-build-env-7ueq13bs/overlay/lib/python3.9/site-packages/setuptools/dist.py", >> >> line 963, in run_command >> super().run_command(command) >> File >> "/tmp/pip-build-env-7ueq13bs/overlay/lib/python3.9/site-packages/setuptools/_distutils/dist.py", >> >> line 988, in run_command >> cmd_obj.run() >> File >> "/tmp/pip-build-env-7ueq13bs/normal/lib/python3.9/site-packages/wheel/bdist_wheel.py", >> >> line 368, in run >> self.run_command("build") >> File >> "/tmp/pip-build-env-7ueq13bs/overlay/lib/python3.9/site-packages/setuptools/_distutils/cmd.py", >> >> line 318, in run_command >> self.distribution.run_command(command) >> File >> "/tmp/pip-build-env-7ueq13bs/overlay/lib/python3.9/site-packages/setuptools/dist.py", >> >> line 963, in run_command >> super().run_command(command) >> File >> "/tmp/pip-build-env-7ueq13bs/overlay/lib/python3.9/site-packages/setuptools/_distutils/dist.py", >> >> line 988, in run_command >> cmd_obj.run() >> File >> "/tmp/pip-build-env-7ueq13bs/overlay/lib/python3.9/site-packages/setuptools/_distutils/command/build.py", >> >> line 131, in run >> self.run_command(cmd_name) >> File >> "/tmp/pip-build-env-7ueq13bs/overlay/lib/python3.9/site-packages/setuptools/_distutils/cmd.py", >> >> line 318, in run_command >> self.distribution.run_command(command) >> File >> "/tmp/pip-build-env-7ueq13bs/overlay/lib/python3.9/site-packages/setuptools/dist.py", >> >> line 963, in run_command >> super().run_command(command) >> File >> "/tmp/pip-build-env-7ueq13bs/overlay/lib/python3.9/site-packages/setuptools/_distutils/dist.py", >> >> line 988, in run_command >> cmd_obj.run() >> File >> "/tmp/pip-build-env-7ueq13bs/overlay/lib/python3.9/site-packages/setuptools/command/build_ext.py", >> >> line 88, in run >> _build_ext.run(self) >> File >> "/tmp/pip-build-env-7ueq13bs/overlay/lib/python3.9/site-packages/setuptools/_distutils/command/build_ext.py", >> >> line 345, in run >> self.build_extensions() >> File "<string>", line 812, in build_extensions >> __main__.RequiredDependencyException: jpeg >> >> During handling of the above exception, another exception occurred: >> >> Traceback (most recent call last): >> File >> "/home/pi/weewx-venv/lib/python3.9/site-packages/pip/_vendor/pyproject_hooks/_in_process/_in_process.py", >> >> line 353, in <module> >> main() >> File >> "/home/pi/weewx-venv/lib/python3.9/site-packages/pip/_vendor/pyproject_hooks/_in_process/_in_process.py", >> >> line 335, in main >> json_out['return_val'] = hook(**hook_input['kwargs']) >> File >> "/home/pi/weewx-venv/lib/python3.9/site-packages/pip/_vendor/pyproject_hooks/_in_process/_in_process.py", >> >> line 251, in build_wheel >> return _build_backend().build_wheel(wheel_directory, >> config_settings, >> File >> "/tmp/pip-install-iyqazst5/pillow_9cd4082e6510460f8c52b96f70668fb7/_custom_build/backend.py", >> >> line 55, in build_wheel >> return super().build_wheel(wheel_directory, config_settings, >> metadata_directory) >> File >> "/tmp/pip-build-env-7ueq13bs/overlay/lib/python3.9/site-packages/setuptools/build_meta.py", >> >> line 404, in build_wheel >> return self._build_with_temp_dir( >> File >> "/tmp/pip-build-env-7ueq13bs/overlay/lib/python3.9/site-packages/setuptools/build_meta.py", >> >> line 389, in _build_with_temp_dir >> self.run_setup() >> File >> "/tmp/pip-install-iyqazst5/pillow_9cd4082e6510460f8c52b96f70668fb7/_custom_build/backend.py", >> >> line 49, in run_setup >> return super().run_setup(setup_script) >> File >> "/tmp/pip-build-env-7ueq13bs/overlay/lib/python3.9/site-packages/setuptools/build_meta.py", >> >> line 311, in run_setup >> exec(code, locals()) >> File "<string>", line 1005, in <module> >> __main__.RequiredDependencyException: >> >> The headers or library files could not be found for jpeg, >> a required dependency when compiling Pillow from source. >> >> Please see the install instructions at: >> https://pillow.readthedocs.io/en/latest/installation.html >> >> >> [end of output] >> >> note: This error originates from a subprocess, and is likely not a >> problem with pip. >> ERROR: Failed building wheel for Pillow >> Failed to build Pillow >> ERROR: Could not build wheels for Pillow, which is required to install >> pyproject.toml-based projects >> >> >> >> Il giorno martedì 16 gennaio 2024 alle 12:59:32 UTC+1 gjr80 ha scritto: >> >>> You are not providing very much information. You say you "tried to >>> follow the steps in the guide but it didn't work". What steps in what >>> guide? What happened other than it did not work? >>> >>> Did you read the Upgrading to V5.0 section >>> <http://weewx.com/docs/5.0/upgrade/#upgrading-to-v50> of the Upgrade >>> Guide <http://weewx.com/docs/5.0/upgrade/>? This is mandatory reading >>> when (before) upgrading to version 5. The sub-section pip installs to a >>> new location >>> <http://weewx.com/docs/5.0/upgrade/#pip-installs-to-new-location> >>> actually provides a link to a wiki article titled Migrating setup.py >>> installs to Version 5.0 <https://github.com/weewx/weewx/wiki/v5-upgrade>, >>> did you work through those steps? If not perhaps you should try them, if >>> you did what happened? >>> >>> Gary >>> >>> On Tuesday 16 January 2024 at 20:07:40 UTC+10 fvirg...@gmail.com wrote: >>> >>>> Good morning, >>>> Congrats on the update to weewx 5, >>>> if I may I would like to ask if anyone managed to update weewx version >>>> 5 from 4.10.2 having installed with the old setup.py method. >>>> I tried to follow the steps in the guide but it didn't work. >>>> Has anyone done this update? What are the precise steps to take? >>>> Thank you >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/9c816b47-d908-47be-89b0-eafd87efe6bbn%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/9c816b47-d908-47be-89b0-eafd87efe6bbn%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/3c1e58cf-d386-4eec-b7be-6dfd32c8b85bn%40googlegroups.com.