Maybe you can clarify something. Do you have a cabled VP2 with the serial connection, or a wireless VP2 and a serial datalogger in the console?
You can use the aprs extension or weewx to write a report in aprs format, then use packages like aprsdigi, aprx, direwolf, or xastir to send the data to a connected radio. All have their own special configs, etc. to set up, and you'll need the correct cable to connect your specific radio to your soundcard interface. I have had a serial datalogger for about 15 years and no connection issues. On Sunday, January 28, 2024 at 5:19:15 AM UTC-9 Massimiliano Buldrini wrote: > I'm fine with any software solutions. > > I read that there are problems with datalogger serial and usb. > Is better a datalogger WeatherLinkIP interfaces ? > > Regards > Massimiliano > IZ4SJB > > Il giorno domenica 28 gennaio 2024 alle 15:13:38 UTC+1 Massimiliano > Buldrini ha scritto: > >> Yes >> >> Il giorno sabato 27 gennaio 2024 alle 23:47:23 UTC+1 Devonian ha scritto: >> >>> Direwolf ? >>> >>> Nigel >>> G4ZAL >>> >>> On Saturday 27 January 2024 at 15:19:46 UTC Massimiliano Buldrini wrote: >>> >>>> I have a Davis Vantage Pro 2 with Serial". >>>> >>>> I have a Raspberry P4, a serial card to connect directly to the GPIO, a >>>> CM108 with audio and PTT that I want to connect to a portable radio that >>>> acts as a DIGIPEATER >>>> >>>> What software are needed besides weewx to transmit data via radio and >>>> via igate? >>>> >>>> Can someone give me some advice? >>>> >>>> Regards >>>> Massimiliano >>>> IZ4SJB[image: hardware.jpg] >>>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/534b60f9-2098-4625-b46c-1b4c104a5d22n%40googlegroups.com.