The warning tells you: WeeWX is receiving 0.0 for "pressure". You say, "The hardware console is operating correctly as expected", so the problem is somewhere in between the hardware and the LOOP. It may be, that your hardware/driver combination doesn't supply a valid value for "pressure" (it should return "None" instead of "0.0" in this case), did you try "barometer" or "altimeter" instead? You can also check in your database, if there are values for these types. If so, take a look into this article <https://github.com/weewx/weewx/wiki/Barometer,-pressure,-and-altimeter>, to make sure, you really use the correct type for your needs. Having only one out of the three "pressure", "altimeter" and "barometer", it should be possible to calculate the others, when you have the altitude, the temperature and humidity (or even something in addition to that).
Alan Salmon schrieb am Dienstag, 6. Februar 2024 um 12:48:48 UTC+1: > Hello everyone. > > I installed weewx for the first time today on a Raspberry Pi Zero 2W, > using a Fine Offset 3081 station that I used for about 10 years until the > local cockatoos decided it would be fun to dismantle it! > > It came up on the second attempt after a few minor adjustments to the > config file, paths, etc. (I used the pip install method on Debian 11). > > The hardware console is operating correctly as expected, but weewx is > giving me the following error: > > Feb 6 22:26:01 bigfish-08 weewxd[1909]: WARNING weewx.qc: 2024-02-06 > 22:26:02 AEDT (1707218762) LOOP value 'pressure' 0.0 outside limits (24.0, > 34.5) > > As the value displayed on the console (roughly) agrees with a BME680 I > have running, can anyone suggest where I should start trying to solve this? > > Note that I am configured for metric with barometric pressure in > hectopascals (hPa) which is currently just over 1010hPa, so I am at a bit > of a loss as to why it is showing '0.0' and where the range "24.0 to 34.5' > comes from. > > The error has been consistent for the 9 hours it has been running. > > Thanks for any advice you can offer. > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/31ad1404-a6ee-4245-868b-15f75bd7e73bn%40googlegroups.com.
