go to http://192.168.1.5/client?command=record Do you get a result?
On Saturday, June 22, 2024 at 6:35:17 PM UTC-7 Eddie Bryant wrote: > Michael, > > Thank you for your response. I am not familiar with JSON. The WiFi setup > for the WF-100SE says to connect to the L7-xxxx network and using a browser > type in 192.168.1.5. That brings up a page where I type in my network SSID > and the pass key. Below that is sections for adding IDs and keys for > linking to weather unground and weather cloud. > > I reason if I can link to those I should be able to link to APRS.fi and > CWOP but I am not sure how to do that. > > Eddie > > > > On Sat, Jun 22, 2024, 9:12 PM Michael <m.j.za...@gmail.com> wrote: > >> I would verify if you can get the observations out of the unit like I was >> able to. >> >> I went with CumulusMX instead of WeeWX and their board suggested >> translating the JSON to a ECOWITT HTTP Post. Script is in the thread >> below. Overall, I am happier with CumulusMX both in terms of product and >> support community over WeeWX. I was able to enable the WXNOW file for >> Direwolf to post APRS reports easily. >> >> https://cumulus.hosiene.co.uk/viewtopic.php?t=22258&start=15 >> >> On Saturday, June 22, 2024 at 5:47:05 PM UTC-7 Ebryant wrote: >> >>> I have a Raddy WF-100SE station that I would like to get data to aprs.fi >>> and CWOP. If anyone has any suggestions it would help. >>> >>> >>> On Wednesday, March 13, 2024 at 11:42:52 AM UTC-4 Michael wrote: >>> >>>> Hello, >>>> >>>> I currently have a Raddy L7 LoRA station. It appears that that the >>>> weather station provides a JSON output of observations. I am soliciting a >>>> paid opportunity to develop a driver for this weather station and create a >>>> Github page for driver to spread the word. I am just a personal user, but >>>> figure this may be a better approach than having to buy a supported >>>> station. I am not a developer and simply don't have the time to undertake >>>> the effort, but want users of this weather station to be able to use WeeWx >>>> (Yes, I tried Interceptor, but I failed in getting to work and this >>>> appears >>>> to be a more graceful approach). If you are interested in the work, >>>> please >>>> let me know. >>>> >>>> The JSON URL is http://ip/client?command=record >>>> >>>> The update period appears to vary between 5-30 seconds. >>>> >>>> Example output >>>> Sensor Parameter Value >>>> ------------------------------------------------------- >>>> Indoor Temperature 69.4 >>>> Indoor Humidity 43 >>>> Outdoor Temperature 44.7 >>>> Outdoor Humidity 70 >>>> Pressure Absolute 26.74 >>>> Pressure Relative 29.86 >>>> Wind Speed Max Daily Gust 3.8 >>>> Wind Speed Wind 0.0 >>>> Wind Speed Gust 0.0 >>>> Wind Speed Direction 213 >>>> Wind Speed Wind Average 2 Minute0.0 >>>> Wind Speed Direction Average 2 Minute204 >>>> Wind Speed Wind Average 10 Minute0.2 >>>> Wind Speed Direction Average 10 Minute300 >>>> Rainfall Rate 0.0 >>>> Rainfall Hour 0.0 >>>> Rainfall Day 0.0 >>>> Rainfall Week 0.73 >>>> Rainfall Month 0.73 >>>> Rainfall Year 6.45 >>>> Rainfall Total 11.39 >>>> Solar Light 0.3 >>>> Solar UVI 0.0 >>>> JSON Message: >>>> {"sensor":[ >>>> {"title":"Indoor","list":[["Temperature","71.6","°F"],["Humidity","41","%"]]},{"title":"Outdoor","list":[["Temperature","59.2","°F"],["Humidity","44","%"]]},{"title":"Pressure","list":[["Absolute","26.77","inhg"],["Relative","29.89","inhg"]]},{"title":"Wind >>>> >>>> Speed","list":[["Max Daily >>>> Gust","8.9","mph"],["Wind","3.6","mph"],["Gust","3.8","mph"],["Direction","264","°"],["Wind >>>> >>>> Average 2 Minute","4.3","mph"],["Direction Average 2 >>>> Minute","246","°"],["Wind Average 10 Minute","3.1","mph"],["Direction >>>> Average 10 >>>> Minute","241","°"]]},{"title":"Rainfall","list":[["Rate","0.0","inch/hr"],["Hour","0.0","inch","43"],["Day","0.0","inch","44"],["Week","0.73","inch","45"],["Month","0.73","inch","46"],["Year","6.45","inch","47"],["Total","11.39","inch","48"]],"range":"Range: >>>> >>>> 0inch to >>>> 393.7inch."},{"title":"Solar","list":[["Light","153.59","w/m²"],["UVI","0.8",""]]}],"battery":{"title":"Battery","list":["All >>>> >>>> battery are ok"]}} >>>> >>>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/28bf858b-693d-4dc0-9ac1-182cc61fa7den%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/28bf858b-693d-4dc0-9ac1-182cc61fa7den%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/357ea7c6-b2a7-47a5-ac75-d5e90b96b72fn%40googlegroups.com.
