Sure it could, try “lsusb” to list the usb devices found. You might need to
preface it with sudo. Alternately unplug it, wait a couple seconds, plug
it back in and run “sudo dmesg” to see kernel messages that usually have
enough info to figure it out.
On Sunday, February 2, 2025 at 4:01:50 PM UTC-8 scott pierce wrote:
> Ran the journal log and it produced this:
>
> Feb 01 16:48:38 scott systemd[1]: Started weewx.service - WeeWX.
> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Initializing weewxd
> version 5.1.0
> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Command line:
> /usr/share/weewx/weewxd.py /etc/weewx/weewx.conf
> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Using Python: 3.11.2
> (main, Nov 30 2024, 21:22:50) [GCC 12.2.0]
> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Located at:
> /usr/bin/python3
> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Platform:
> Linux-6.6.74+rpt-rpi-2712-aarch64-with-glibc2.36
> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Locale:
> 'en_US.UTF-8'
> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Entry path:
> /usr/share/weewx/weewxd.py
> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: WEEWX_ROOT: /etc/weewx
> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Config file:
> /etc/weewx/weewx.conf
> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: User module:
> /etc/weewx/bin/user
> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Debug: 0
> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: User: weewx
> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Group: weewx
> Feb 01 16:48:38 scott weewxd[3395]: INFO __main__: Groups: weewx
> Feb 01 16:48:38 scott weewxd[3395]: INFO weewx.engine: Loading station
> type Vantage (weewx.drivers.vantage)
> Feb 01 16:48:38 scott weewxd[3395]: ERROR weewx.engine: Import of driver
> failed: [Errno 2] could not open port /dev/ttyUSB0: [Errno 2] No such file
> or directory: '/dev/ttyUSB0' (<class 'serial.serialutil.SerialException'>)
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> Traceback (most recent call last):
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> File "/usr/lib/python3/dist-packages/serial/serialposix.py", line 322, in
> open
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> self.fd = os.open(self.portstr, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK)
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> FileNotFoundError: [Errno 2] No such file or directory: '/dev/ttyUSB0'
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> During handling of the above exception, another exception occurred:
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> Traceback (most recent call last):
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> File "/usr/share/weewx/weewx/engine.py", line 115, in setupStation
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> self.console = loader_function(config_dict, self)
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> File "/usr/share/weewx/weewx/drivers/vantage.py", line 32, in loader
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> return VantageService(engine, config_dict)
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> File "/usr/share/weewx/weewx/drivers/vantage.py", line 2046, in __init__
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> Vantage.__init__(self, **config_dict[DRIVER_NAME])
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> File "/usr/share/weewx/weewx/drivers/vantage.py", line 536, in __init__
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> self.port.openPort()
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> File "/usr/share/weewx/weewx/drivers/vantage.py", line 319, in openPort
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> self.serial_port = serial.Serial(self.port, self.baudrate,
> timeout=self.timeout)
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
>
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> File "/usr/lib/python3/dist-packages/serial/serialutil.py", line 244, in
> __init__
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> self.open()
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> File "/usr/lib/python3/dist-packages/serial/serialposix.py", line 325, in
> open
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> raise SerialException(msg.errno, "could not open port {}:
> {}".format(self._port, msg))
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL weewx.engine: ****
> serial.serialutil.SerialException: [Errno 2] could not open port
> /dev/ttyUSB0: [Errno 2] No such file or directory: '/dev/ttyUSB0'
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL __main__: Unable to load
> driver: [Errno 2] could not open port /dev/ttyUSB0: [Errno 2] No such file
> or directory: '/dev/ttyUSB0'
> Feb 01 16:48:38 scott weewxd[3395]: CRITICAL __main__: **** Exiting...
> Feb 01 16:48:38 scott systemd[1]: weewx.service: Main process exited,
> code=exited, status=4/NOPERMISSION
> Feb 01 16:48:38 scott systemd[1]: weewx.service: Failed with result
> 'exit-code'.
> Feb 01 20:26:36 spi-1 systemd[1]: Started weewx.service - WeeWX.
> Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Initializing weewxd
> version 5.1.0
> Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Command line:
> /usr/share/weewx/weewxd.py /etc/weewx/weewx.conf
> Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Using Python: 3.11.2
> (main, Nov 30 2024, 21:22:50) [GCC 12.2.0]
> Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Located at:
> /usr/bin/python3
> Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Platform:
> Linux-6.6.74+rpt-rpi-2712-aarch64-with-glibc2.36
> Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Locale:
> 'en_US.UTF-8'
> Feb 01 20:26:36 spi-1 weewxd[6036]: INFO __main__: Entry path:
> /usr/share/weewx/weewxd.py
> lines 1-56
>
> *To an uneducated brain, this looks like a problem with the driver for the
> USB data logger from the Envoy. I have NO idea what port the USB is going
> to on the Rpi so I just selected "the most common" option in the auto
> install process. Could this be the issue?*
> *Thanks*
> *Scott*
>
>
> On Sunday, February 2, 2025 at 6:22:56 PM UTC-5 scott pierce wrote:
>
>> Here is what I have:
>> scott@spi-1:~ $ groups
>> scott adm dialout cdrom sudo audio video plugdev games users input render
>> netdev lpadmin weewx gpio i2c spi
>> scott@spi-1:~ $
>>
>> and
>>
>> scott@spi-1:~ $ groups weewx
>> weewx : weewx
>>
>>
>> On Sunday, February 2, 2025 at 4:10:06 PM UTC-5 vince wrote:
>>
>>> weewx.service: Main process exited, code=exited, status=4/NOPERMISSION
>>> generally means the user running the command is not in the required unix
>>> groups, which can be a little tricky to get right especially as a new linuc
>>> user.
>>>
>>> Try ‘groups’ to see which groups your account is in, and ‘groups weewx’
>>> to see which groups the weewx user is in. Your shell prompt is a bit
>>> unusual so I can’t see which account you are using in your log excerpts.
>>> On Sunday, February 2, 2025 at 12:15:45 PM UTC-8 scott pierce wrote:
>>>
>>>> *and here are the results when I run weectl device...still showing an
>>>> unknown hardware issue:*
>>>>
>>>> @-1:~ $ weectl device
>>>> Using configuration file /etc/weewx/weewx.conf
>>>> Using driver weewx.drivers.vantage.
>>>> Using Vantage driver version 3.6.2 (weewx.drivers.vantage)
>>>> Unable to wake up console... sleeping
>>>> Unable to wake up console... retrying
>>>> Traceback (most recent call last):
>>>> File "/usr/share/weewx/weectl.py", line 75, in <module>
>>>> main()
>>>> File "/usr/share/weewx/weectl.py", line 42, in main
>>>> weectllib.device_actions.device()
>>>> File "/usr/share/weewx/weectllib/device_actions.py", line 91, in
>>>> device
>>>> configurator.configure(config_dict)
>>>> File "/usr/share/weewx/weewx/drivers/__init__.py", line 71, in
>>>> configure
>>>> self.do_options(options, parser, config_dict, not options.noprompt)
>>>> File "/usr/share/weewx/weewx/drivers/vantage.py", line 2238, in
>>>> do_options
>>>> station = Vantage(**config_dict[DRIVER_NAME])
>>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>>> File "/usr/share/weewx/weewx/drivers/vantage.py", line 540, in
>>>> __init__
>>>>
>>>> log.debug("Hardware name: %s", self.hardware_name)
>>>> ^^^^^^^^^^^^^^^^^^
>>>>
>>>> File "/usr/share/weewx/weewx/drivers/vantage.py", line 1416, in
>>>> hardware_name
>>>> raise weewx.UnsupportedFeature("Unknown hardware type %d" %
>>>> self.hardware_type)
>>>> weewx.UnsupportedFeature: Unknown hardware type 10
>>>> @1:~ $
>>>>
>>>> On Sunday, February 2, 2025 at 3:10:39 PM UTC-5 scott pierce wrote:
>>>>
>>>>> *Here is the info that came through after running weectl debug:*
>>>>>
>>>>> System info
>>>>> Platform: Linux-6.6.74+rpt-rpi-2712-aarch64-with-glibc2.36
>>>>> Python Version: 3.11.2
>>>>>
>>>>> Load Information
>>>>> 1 minute load average: 0.00
>>>>> 5 minute load average: 0.04
>>>>> 15 minute load average: 0.13
>>>>>
>>>>> General Weewx info
>>>>> Weewx version 5.1.0 detected.
>>>>>
>>>>> Currently installed extensions
>>>>> No extensions installed.
>>>>>
>>>>> Archive info
>>>>> Database name: weewx.sdb
>>>>> Table name: archive
>>>>> Version 4.0
>>>>> Unit system: 1 (US)
>>>>> First good timestamp: 2025-01-30 14:50:00 EST (1738266600)
>>>>> Last good timestamp: 2025-02-02 15:00:00 EST (1738526400)
>>>>> Number of records: 434
>>>>> weewx (weewx.conf) is set to use an archive interval of 300 seconds.
>>>>> The station hardware was not interrogated to determine the archive
>>>>> interval.
>>>>>
>>>>> Supported SQL keys
>>>>> dateTime usUnits interval
>>>>>
>>>>> altimeter appTemp appTemp1
>>>>>
>>>>> barometer batteryStatus1 batteryStatus2
>>>>>
>>>>> batteryStatus3 batteryStatus4 batteryStatus5
>>>>>
>>>>> batteryStatus6 batteryStatus7 batteryStatus8
>>>>>
>>>>> cloudbase co co2
>>>>>
>>>>> consBatteryVoltage dewpoint dewpoint1
>>>>>
>>>>> ET extraHumid1 extraHumid2
>>>>>
>>>>> extraHumid3 extraHumid4 extraHumid5
>>>>>
>>>>> extraHumid6 extraHumid7 extraHumid8
>>>>>
>>>>> extraTemp1 extraTemp2 extraTemp3
>>>>>
>>>>> extraTemp4 extraTemp5 extraTemp6
>>>>>
>>>>> extraTemp7 extraTemp8 forecast
>>>>>
>>>>> hail hailBatteryStatus hailRate
>>>>>
>>>>> heatindex heatindex1 heatingTemp
>>>>>
>>>>> heatingVoltage humidex humidex1
>>>>>
>>>>> inDewpoint inHumidity inTemp
>>>>>
>>>>> inTempBatteryStatus leafTemp1 leafTemp2
>>>>>
>>>>> leafWet1 leafWet2
>>>>> lightning_distance
>>>>> lightning_disturber_count lightning_energy
>>>>> lightning_noise_count
>>>>> lightning_strike_count luminosity maxSolarRad
>>>>>
>>>>> nh3 no2 noise
>>>>>
>>>>> o3 outHumidity outTemp
>>>>>
>>>>> outTempBatteryStatus pb pm10_0
>>>>>
>>>>> pm1_0 pm2_5 pressure
>>>>>
>>>>> radiation rain
>>>>> rainBatteryStatus
>>>>> rainRate referenceVoltage rxCheckPercent
>>>>>
>>>>> signal1 signal2 signal3
>>>>>
>>>>> signal4 signal5 signal6
>>>>>
>>>>> signal7 signal8 snow
>>>>>
>>>>> snowBatteryStatus snowDepth snowMoisture
>>>>>
>>>>> snowRate so2 soilMoist1
>>>>>
>>>>> soilMoist2 soilMoist3 soilMoist4
>>>>>
>>>>> soilTemp1 soilTemp2 soilTemp3
>>>>>
>>>>> soilTemp4 supplyVoltage txBatteryStatus
>>>>>
>>>>> UV uvBatteryStatus
>>>>> windBatteryStatus
>>>>> windchill windDir windGust
>>>>>
>>>>> windGustDir windrun windSpeed
>>>>>
>>>>>
>>>>> Databases configured in weewx.conf:
>>>>> archive_sqlite:
>>>>> database_name weewx.sdb
>>>>> driver weedb.sqlite
>>>>> SQLITE_ROOT /var/lib/weewx
>>>>> archive_mysql:
>>>>> database_name weewx
>>>>> driver weedb.mysql
>>>>> host localhost
>>>>> user weewx
>>>>> password weewx
>>>>>
>>>>> --- Start configuration file /etc/weewx/weewx.conf ---
>>>>> # WEEWX CONFIGURATION FILE
>>>>> #
>>>>> # Copyright (c) 2009-2024 Tom Keffer
>>>>> # See the file LICENSE.txt for your rights.
>>>>>
>>>>>
>>>>> ##############################################################################
>>>>>
>>>>> # This section is for general configuration information.
>>>>>
>>>>> # Set to 1 for extra debug info, otherwise comment it out or set to
>>>>> zero.
>>>>> debug = 1
>>>>>
>>>>> # Whether to log successful operations. May get overridden below.
>>>>> log_success = True
>>>>>
>>>>> # Whether to log unsuccessful operations. May get overridden below.
>>>>> log_failure = True
>>>>>
>>>>> # This configuration file was created by ...
>>>>> version = 5.1.0
>>>>> config_path = /etc/weewx/weewx.conf
>>>>> WEEWX_ROOT = /etc/weewx
>>>>>
>>>>>
>>>>> ##############################################################################
>>>>>
>>>>> # This section is for information about the station.
>>>>>
>>>>> [Station]
>>>>>
>>>>> # Description of the station location, such as your town.
>>>>> location = "Savannah, GA"
>>>>>
>>>>> # Latitude in decimal degrees. Negative for southern hemisphere.
>>>>> latitude = 31.919095
>>>>> # Longitude in decimal degrees. Negative for western hemisphere.
>>>>> longitude = -81.075874
>>>>>
>>>>> # Altitude of the station, with the unit it is in. This is used
>>>>> only
>>>>> # if the hardware cannot supply a value.
>>>>> altitude = 14, foot # Choose 'foot' or 'meter' for unit
>>>>>
>>>>> # Set to type of station hardware. There must be a corresponding
>>>>> stanza
>>>>> # in this file, which includes a value for the 'driver' option.
>>>>> station_type = Vantage
>>>>>
>>>>> # If you have a website, you may specify an URL
>>>>> station_url = XXXXXX
>>>>>
>>>>> # The start of the rain year (1=January; 10=October, etc.). This is
>>>>> # downloaded from the station if the hardware supports it.
>>>>> rain_year_start = 1
>>>>>
>>>>> # Start of week (0=Monday, 6=Sunday)
>>>>> week_start = 0
>>>>>
>>>>>
>>>>> ##############################################################################
>>>>>
>>>>> [Vantage]
>>>>> # This section is for the Davis Vantage series of weather stations.
>>>>>
>>>>> # Connection type: serial or ethernet
>>>>> # serial (the classic VantagePro)
>>>>> # ethernet (the WeatherLinkIP or Serial-Ethernet bridge)
>>>>> type = serial
>>>>>
>>>>> # If the connection type is serial, a port must be specified:
>>>>> # Debian, Ubuntu, Redhat, Fedora, and SuSE:
>>>>> # /dev/ttyUSB0 is a common USB port name
>>>>> # /dev/ttyS0 is a common serial port name
>>>>> # BSD:
>>>>> # /dev/cuaU0 is a common serial port name
>>>>> port = /dev/ttyUSB0
>>>>>
>>>>> # If the connection type is ethernet, an IP Address/hostname is
>>>>> required:
>>>>> host = 1.2.3.4
>>>>>
>>>>> ######################################################
>>>>> # The rest of this section rarely needs any attention.
>>>>> # You can safely leave it "as is."
>>>>> ######################################################
>>>>>
>>>>> # Serial baud rate (usually 19200)
>>>>> baudrate = 19200
>>>>>
>>>>> # TCP port (when using the WeatherLinkIP)
>>>>> tcp_port = 22222
>>>>>
>>>>> # TCP send delay (when using the WeatherLinkIP):
>>>>> tcp_send_delay = 0.5
>>>>>
>>>>> # The type of LOOP packet to request: 1 = LOOP1; 2 = LOOP2; 3 =
>>>>> both
>>>>> loop_request = 1
>>>>>
>>>>> # The id of your ISS station (usually 1). If you use a wind meter
>>>>> connected
>>>>> # to a anemometer transmitter kit, use its id
>>>>> iss_id = 1
>>>>>
>>>>> # How long to wait for a response from the station before giving
>>>>> up (in
>>>>> # seconds; must be greater than 2)
>>>>> timeout = 4
>>>>>
>>>>> # How long to wait before trying again (in seconds)
>>>>> wait_before_retry = 1.2
>>>>>
>>>>> # How many times to try before giving up:
>>>>> max_tries = 4
>>>>>
>>>>> # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2
>>>>> model_type = 2
>>>>>
>>>>> # The driver to use:
>>>>> driver = weewx.drivers.vantage
>>>>>
>>>>>
>>>>> ##############################################################################
>>>>>
>>>>> [Simulator]
>>>>> # This section is for the weewx weather station simulator.
>>>>>
>>>>> # The time (in seconds) between LOOP packets.
>>>>> loop_interval = 2.5
>>>>>
>>>>> # The simulator mode can be either 'simulator' or 'generator'.
>>>>> # Real-time simulator. Sleep between each LOOP packet.
>>>>> mode = simulator
>>>>> # Generator. Emit LOOP packets as fast as possible (useful for
>>>>> testing).
>>>>> #mode = generator
>>>>>
>>>>> # The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the
>>>>> # default is to use the present time.
>>>>> #start = 2011-01-01T00:00
>>>>>
>>>>> # The driver to use.
>>>>> driver = weewx.drivers.simulator
>>>>>
>>>>>
>>>>> ##############################################################################
>>>>>
>>>>> # This section is for uploading data to Internet sites
>>>>>
>>>>> [StdRESTful]
>>>>>
>>>>> # Uncomment and change to override logging for uploading services.
>>>>> # log_success = True
>>>>> # log_failure = True
>>>>>
>>>>> [[StationRegistry]]
>>>>> # To register this weather station at weewx.com, set this to
>>>>> true, and
>>>>> # set option 'station_url', located in the [Station] section
>>>>> above.
>>>>> register_this_station = True
>>>>>
>>>>> [[AWEKAS]]
>>>>> # This section is for configuring posts to AWEKAS.
>>>>>
>>>>> # If you wish to post to AWEKAS, set the option 'enable' to
>>>>> true, then
>>>>> # specify a username and password.
>>>>> # Use quotes around the password to guard against parsing
>>>>> errors.
>>>>> enable = false
>>>>> username = XXXXXX
>>>>> password = XXXXXX
>>>>>
>>>>> [[CWOP]]
>>>>> # This section is for configuring posts to CWOP.
>>>>>
>>>>> # If you wish to post to CWOP, set the option 'enable' to true,
>>>>> # then specify the station ID (e.g., CW1234).
>>>>> enable = false
>>>>> station = XXXXXX
>>>>> # If this is an APRS (radio amateur) station, specify the
>>>>> # passcode (e.g., 12345). Otherwise, ignore.
>>>>> passcode = XXXXXX
>>>>>
>>>>> [[PWSweather]]
>>>>> # This section is for configuring posts to PWSweather.com.
>>>>>
>>>>> # If you wish to post to PWSweather.com, set the option
>>>>> 'enable' to
>>>>> # true, then specify a station and password.
>>>>> # Use quotes around the password to guard against parsing
>>>>> errors.
>>>>> enable = false
>>>>> station = XXXXXX
>>>>> password = XXXXXX
>>>>>
>>>>> [[WOW]]
>>>>> # This section is for configuring posts to WOW.
>>>>>
>>>>> # If you wish to post to WOW, set the option 'enable' to true,
>>>>> then
>>>>> # specify a station and password.
>>>>> # Use quotes around the password to guard against parsing
>>>>> errors.
>>>>> enable = false
>>>>> station = XXXXXX
>>>>> password = XXXXXX
>>>>>
>>>>> [[Wunderground]]
>>>>> # This section is for configuring posts to the Weather
>>>>> Underground.
>>>>>
>>>>> # If you wish to post to the Weather Underground, set the
>>>>> option
>>>>> # 'enable' to true, then specify a station (e.g.,
>>>>> 'KORHOODR3'). Use
>>>>> # the station key (find it at
>>>>> # https://www.wunderground.com/member/devices) for the
>>>>> password.
>>>>> enable = false
>>>>> station = XXXXXX
>>>>> password = XXXXXX
>>>>>
>>>>> # Set the following to True to have weewx use the WU
>>>>> "Rapidfire"
>>>>> # protocol. Not all hardware can support it. See the User's
>>>>> Guide.
>>>>> rapidfire = False
>>>>>
>>>>>
>>>>> ##############################################################################
>>>>>
>>>>> # This section specifies what reports, using which skins, to
>>>>> generate.
>>>>>
>>>>> [StdReport]
>>>>>
>>>>> # Where the skins reside, relative to WEEWX_ROOT
>>>>> SKIN_ROOT = skins
>>>>>
>>>>> # Where the generated reports should go, relative to WEEWX_ROOT
>>>>> HTML_ROOT = /var/www/html/weewx
>>>>>
>>>>> # Uncomment and change to override logging for reports.
>>>>> # log_success = True
>>>>> # log_failure = True
>>>>>
>>>>> # The database binding indicates which data should be used in
>>>>> reports.
>>>>> data_binding = wx_binding
>>>>>
>>>>> # Each of the following subsections defines a report that will be
>>>>> run.
>>>>> # See the customizing guide to change the units, plot types and
>>>>> line
>>>>> # colors, modify the fonts, display additional sensor data, and
>>>>> other
>>>>> # customizations. Many of those changes can be made here by
>>>>> overriding
>>>>> # parameters, or by modifying templates within the skin itself.
>>>>>
>>>>> [[SeasonsReport]]
>>>>> # The SeasonsReport uses the 'Seasons' skin, which contains the
>>>>> # images, templates and plots for the report.
>>>>> skin = Seasons
>>>>> enable = true
>>>>>
>>>>> [[SmartphoneReport]]
>>>>> # The SmartphoneReport uses the 'Smartphone' skin, and the
>>>>> images and
>>>>> # files are placed in a dedicated subdirectory.
>>>>> skin = Smartphone
>>>>> enable = false
>>>>> HTML_ROOT = /var/www/html/weewx/smartphone
>>>>>
>>>>> [[MobileReport]]
>>>>> # The MobileReport uses the 'Mobile' skin, and the images and
>>>>> files
>>>>> # are placed in a dedicated subdirectory.
>>>>> skin = Mobile
>>>>> enable = false
>>>>> HTML_ROOT = /var/www/html/weewx/mobile
>>>>>
>>>>> [[StandardReport]]
>>>>> # This is the old "Standard" skin. By default, it is not
>>>>> enabled.
>>>>> skin = Standard
>>>>> enable = false
>>>>>
>>>>> [[FTP]]
>>>>> # FTP'ing the results to a webserver is treated as just
>>>>> another report,
>>>>> # albeit one with an unusual report generator!
>>>>> skin = Ftp
>>>>>
>>>>> # If you wish to use FTP, set "enable" to "true", then fill
>>>>> out the
>>>>> # next four lines.
>>>>> # Use quotes around the password to guard against parsing
>>>>> errors.
>>>>> enable = false
>>>>> user = XXXXXX
>>>>> password = XXXXXX
>>>>> server = XXXXXX # The ftp server name, e.g,
>>>>> www.myserver.org
>>>>> path = replace_me # The destination directory, e.g.,
>>>>> /weather
>>>>>
>>>>> # Set to True for an FTP over TLS (FTPS) connection. Not all
>>>>> servers
>>>>> # support this.
>>>>> secure_ftp = False
>>>>>
>>>>> # To upload files from something other than what HTML_ROOT is
>>>>> set
>>>>> # to above, specify a different HTML_ROOT here.
>>>>> #HTML_ROOT = /var/www/html/weewx
>>>>>
>>>>> # Most FTP servers use port 21.
>>>>> port = 21
>>>>>
>>>>> # Set to 1 to use passive mode, zero for active mode
>>>>> passive = 1
>>>>>
>>>>> [[RSYNC]]
>>>>> # rsync'ing to a webserver is treated as just another report.
>>>>> skin = Rsync
>>>>>
>>>>> # If you wish to use rsync, you must configure passwordless
>>>>> ssh using
>>>>> # public/private key authentication from the user account that
>>>>> weewx
>>>>> # runs to the user account on the remote machine where the
>>>>> files
>>>>> # will be copied.
>>>>> #
>>>>> # If you wish to use rsync, set "enable" to "true", then
>>>>> # fill out server, user, and path.
>>>>> # The server should appear in your .ssh/config file.
>>>>> # The user is the username used in the identity file.
>>>>> # The path is the destination directory, such as
>>>>> /var/www/html/weather.
>>>>> # Be sure that the user has write permissions on the
>>>>> destination!
>>>>> enable = false
>>>>> server = XXXXXX
>>>>> user = XXXXXX
>>>>> path = replace_me
>>>>>
>>>>> # To upload files from something other than what HTML_ROOT is
>>>>> set
>>>>> # to above, specify a different HTML_ROOT here.
>>>>> #HTML_ROOT = /var/www/html/weewx
>>>>>
>>>>> # Rsync can be configured to remove files from the remote
>>>>> server if
>>>>> # they don't exist under HTML_ROOT locally. USE WITH CAUTION:
>>>>> if you
>>>>> # make a mistake in the remote path, you could could
>>>>> unintentionally
>>>>> # cause unrelated files to be deleted. Set to 1 to enable
>>>>> remote file
>>>>> # deletion, zero to allow files to accumulate remotely.
>>>>> delete = 0
>>>>>
>>>>> # Options in the [[Defaults]] section below will apply to all
>>>>> reports.
>>>>> # What follows are a few of the more popular options you may want
>>>>> to
>>>>> # uncomment, then change.
>>>>> [[Defaults]]
>>>>>
>>>>> # Which language to use for all reports. Not all skins support
>>>>> all
>>>>> # languages. You can override this for individual reports.
>>>>> lang = en
>>>>>
>>>>> # Which unit system to use for all reports. Choices are 'us',
>>>>> 'metric',
>>>>> # or 'metricwx'. You can override this for individual reports.
>>>>> unit_system = us
>>>>>
>>>>> [[[Units]]]
>>>>>
>>>>> # Option "unit_system" above sets the general unit system,
>>>>> but
>>>>> # overriding specific unit groups is possible. These are
>>>>> popular
>>>>> # choices. Uncomment and set as appropriate. The unit is
>>>>> always
>>>>> # in the singular, e.g., 'mile_per_hour', NOT
>>>>> 'miles_per_hour'
>>>>> [[[[Groups]]]]
>>>>> # group_altitude = meter # Options
>>>>> are 'foot' or 'meter'
>>>>> # group_pressure = mbar # Options
>>>>> are 'inHg', 'mmHg', 'mbar', or 'hPa'
>>>>> # group_rain = mm # Options
>>>>> are 'inch', 'cm', or 'mm'
>>>>> # group_rainrate = mm_per_hour # Options
>>>>> are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
>>>>> # group_temperature = degree_C # Options
>>>>> are 'degree_C', 'degree_F', or 'degree_K'
>>>>> # The following line is used to keep the above lines
>>>>> indented
>>>>> # properly. It can be ignored.
>>>>> unused = unused
>>>>>
>>>>> # Uncommenting the following section frequently results in
>>>>> more
>>>>> # attractive formatting of times and dates, but may not
>>>>> work in
>>>>> # your locale.
>>>>> [[[[TimeFormats]]]]
>>>>> # day = %H:%M
>>>>> # week = %H:%M on %A
>>>>> # month = %d-%b-%Y %H:%M
>>>>> # year = %d-%b-%Y %H:%M
>>>>> # rainyear = %d-%b-%Y %H:%M
>>>>> # current = %d-%b-%Y %H:%M
>>>>> # ephem_day = %H:%M
>>>>> # ephem_year = %d-%b-%Y %H:%M
>>>>> # The following line is used to keep the above lines
>>>>> indented
>>>>> # properly. It can be ignored.
>>>>> unused = unused
>>>>>
>>>>> [[[Labels]]]
>>>>> # Users frequently change the labels for these observation
>>>>> types.
>>>>> [[[[Generic]]]]
>>>>> # inHumidity = Inside Humidity
>>>>> # inTemp = Inside Temperature
>>>>> # outHumidity = Outside Humidity
>>>>> # outTemp = Outside Temperature
>>>>> # extraTemp1 = Temperature1
>>>>> # extraTemp2 = Temperature2
>>>>> # extraTemp3 = Temperature3
>>>>> # The following line is used to keep the above lines
>>>>> indented
>>>>> # properly. It can be ignored.
>>>>> unused = unused
>>>>>
>>>>>
>>>>> ##############################################################################
>>>>>
>>>>> # This service converts the unit system coming from the hardware to
>>>>> a unit
>>>>> # system in the database.
>>>>>
>>>>> [StdConvert]
>>>>>
>>>>> # The target_unit affects only the unit system in the database.
>>>>> Once
>>>>> # chosen it cannot be changed without converting the entire
>>>>> database.
>>>>> # Modification of target_unit after starting weewx will result in
>>>>> # corrupt data - the database will contain a mix of US and METRIC
>>>>> data.
>>>>> #
>>>>> # The value of target_unit does not affect the unit system for
>>>>> # reporting - reports can display US, Metric, or any combination
>>>>> of units.
>>>>> #
>>>>> # In most cases, target_unit should be left as the default: US
>>>>> #
>>>>> # In particular, those migrating from a standard wview installation
>>>>> # should use US since that is what the wview database contains.
>>>>>
>>>>> # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
>>>>> target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
>>>>>
>>>>>
>>>>> ##############################################################################
>>>>>
>>>>> # This section can adjust data using calibration expressions.
>>>>>
>>>>> [StdCalibrate]
>>>>>
>>>>> [[Corrections]]
>>>>> # For each type, an arbitrary calibration expression can be
>>>>> given.
>>>>> # It should be in the units defined in the StdConvert section.
>>>>> # Example:
>>>>> foo = foo + 0.2
>>>>>
>>>>>
>>>>> ##############################################################################
>>>>>
>>>>> # This section is for quality control checks. If units are not
>>>>> specified,
>>>>> # values must be in the units defined in the StdConvert section.
>>>>>
>>>>> [StdQC]
>>>>>
>>>>> [[MinMax]]
>>>>> barometer = 26, 32.5, inHg
>>>>> pressure = 24, 34.5, inHg
>>>>> outTemp = -40, 120, degree_F
>>>>> inTemp = 10, 120, degree_F
>>>>> outHumidity = 0, 100
>>>>> inHumidity = 0, 100
>>>>> windSpeed = 0, 120, mile_per_hour
>>>>> rain = 0, 10, inch
>>>>>
>>>>>
>>>>> ##############################################################################
>>>>>
>>>>> # This section controls the origin of derived values.
>>>>>
>>>>> [StdWXCalculate]
>>>>>
>>>>> [[Calculations]]
>>>>> # How to calculate derived quantities. Possible values are:
>>>>> # hardware - use the value provided by hardware
>>>>> # software - use the value calculated by weewx
>>>>> # prefer_hardware - use value provide by hardware if
>>>>> available,
>>>>> # otherwise use value calculated by weewx
>>>>>
>>>>> pressure = prefer_hardware
>>>>> altimeter = prefer_hardware
>>>>> appTemp = prefer_hardware
>>>>> barometer = prefer_hardware
>>>>> cloudbase = prefer_hardware
>>>>> dewpoint = prefer_hardware
>>>>> ET = prefer_hardware
>>>>> heatindex = prefer_hardware
>>>>> humidex = prefer_hardware
>>>>> inDewpoint = prefer_hardware
>>>>> maxSolarRad = prefer_hardware
>>>>> rainRate = prefer_hardware
>>>>> windchill = prefer_hardware
>>>>> windrun = prefer_hardware
>>>>>
>>>>>
>>>>> ##############################################################################
>>>>>
>>>>> # For hardware that supports it, this section controls how often the
>>>>> # onboard clock gets updated.
>>>>>
>>>>> [StdTimeSynch]
>>>>>
>>>>> # How often to check the weather station clock for drift (in
>>>>> seconds)
>>>>> clock_check = 14400
>>>>>
>>>>> # How much it can drift before we will correct it (in seconds)
>>>>> max_drift = 5
>>>>>
>>>>>
>>>>> ##############################################################################
>>>>>
>>>>> # This section is for configuring the archive service.
>>>>>
>>>>> [StdArchive]
>>>>>
>>>>> # If the station hardware supports data logging then the archive
>>>>> interval
>>>>> # will be downloaded from the station. Otherwise, specify it (in
>>>>> seconds).
>>>>> archive_interval = 300
>>>>>
>>>>> # If possible, new archive records are downloaded from the station
>>>>> # hardware. If the hardware does not support this, then new archive
>>>>> # records will be generated in software.
>>>>> # Set the following to "software" to force software record
>>>>> generation.
>>>>> record_generation = hardware
>>>>>
>>>>> # Whether to include LOOP data in hi/low statistics.
>>>>> loop_hilo = True
>>>>>
>>>>> # Uncomment and change to override logging for archive operations.
>>>>> # log_success = True
>>>>> # log_failure = True
>>>>>
>>>>> # The data binding used to save archive records.
>>>>> data_binding = wx_binding
>>>>>
>>>>>
>>>>> ##############################################################################
>>>>>
>>>>> # This section binds a data store to a database.
>>>>>
>>>>> [DataBindings]
>>>>>
>>>>> [[wx_binding]]
>>>>> # The database must match one of the sections in [Databases].
>>>>> # This is likely to be the only option you would want to
>>>>> change.
>>>>> database = archive_sqlite
>>>>> # The name of the table within the database.
>>>>> table_name = archive
>>>>> # The manager handles aggregation of data for historical
>>>>> summaries.
>>>>> manager = weewx.manager.DaySummaryManager
>>>>> # The schema defines the structure of the database.
>>>>> # It is *only* used when the database is created.
>>>>> schema = schemas.wview_extended.schema
>>>>>
>>>>>
>>>>> ##############################################################################
>>>>>
>>>>> # This section defines various databases.
>>>>>
>>>>> [Databases]
>>>>>
>>>>> # A SQLite database is simply a single file.
>>>>> [[archive_sqlite]]
>>>>> database_name = weewx.sdb
>>>>> database_type = SQLite
>>>>>
>>>>> # MySQL
>>>>> [[archive_mysql]]
>>>>> database_name = weewx
>>>>> database_type = MySQL
>>>>>
>>>>>
>>>>> ##############################################################################
>>>>>
>>>>> # This section defines defaults for the different types of databases.
>>>>>
>>>>> [DatabaseTypes]
>>>>>
>>>>> # Defaults for SQLite databases.
>>>>> [[SQLite]]
>>>>> driver = weedb.sqlite
>>>>> # Directory in which database files are located, relative to
>>>>> WEEWX_ROOT
>>>>> SQLITE_ROOT = /var/lib/weewx
>>>>>
>>>>> # Defaults for MySQL databases.
>>>>> [[MySQL]]
>>>>> driver = weedb.mysql
>>>>> # The host where the database is located.
>>>>> host = localhost
>>>>> # The user name for logging in to the host.
>>>>> user = XXXXXX
>>>>> # Use quotes around the password to guard against parsing
>>>>> errors.
>>>>> password = XXXXXX
>>>>>
>>>>>
>>>>> ##############################################################################
>>>>>
>>>>> # This section configures the internal weewx engine.
>>>>>
>>>>> [Engine]
>>>>>
>>>>> # This section specifies which services should be run and in what
>>>>> order.
>>>>> [[Services]]
>>>>> prep_services = weewx.engine.StdTimeSynch
>>>>> data_services = ,
>>>>> process_services = weewx.engine.StdConvert,
>>>>> weewx.engine.StdCalibrate, weewx.engine.StdQC,
>>>>> weewx.wxservices.StdWXCalculate
>>>>> xtype_services = weewx.wxxtypes.StdWXXTypes,
>>>>> weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater,
>>>>> weewx.wxxtypes.StdDelta
>>>>> archive_services = weewx.engine.StdArchive
>>>>> restful_services = weewx.restx.StdStationRegistry,
>>>>> weewx.restx.StdWunderground, weewx.restx.StdPWSweather,
>>>>> weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
>>>>> report_services = weewx.engine.StdPrint, weewx.engine.StdReport
>>>>> scott@spi-1:~ $
>>>>>
>>>>>
>>>>> On Sunday, February 2, 2025 at 3:01:39 PM UTC-5 scott pierce wrote:
>>>>>
>>>>>> Yes, big rookie mistake. Working through it now. Thanks for
>>>>>> pointing out!!
>>>>>> Scott
>>>>>>
>>>>>>
>>>>>> On Sunday, February 2, 2025 at 2:37:45 PM UTC-5 [email protected]
>>>>>> wrote:
>>>>>>
>>>>>>> Maybe you missed that you refer to a 4.9 version of the docs, but
>>>>>>> you've installed a 5.1 version?
>>>>>>>
>>>>>>> https://weewx.com/docs/5.1/usersguide/where/?h=find#where-to-find-things
>>>>>>>
>>>>>>> scott pierce schrieb am Sonntag, 2. Februar 2025 um 20:33:42 UTC+1:
>>>>>>>
>>>>>>>> *Also....where are the executables? In the documentation it says:*
>>>>>>>>
>>>>>>>> This is a reference guide to the executable utilities that come
>>>>>>>> with WeeWX:
>>>>>>>>
>>>>>>>> - wee_config
>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_config_utility> for
>>>>>>>> changing the configuration file, and configuring new device drivers;
>>>>>>>> - wee_database
>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_database_utility> for
>>>>>>>> reconfiguring the database;
>>>>>>>> - wee_debug
>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_debug_utility> for
>>>>>>>> producing debug reports for remote support;
>>>>>>>> - wee_device
>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_device_utility> for
>>>>>>>> configuring your hardware;
>>>>>>>> - wee_extension
>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_extension_utility>
>>>>>>>> for
>>>>>>>> installing and removing extensions;
>>>>>>>> - wee_import
>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_import_utility> for
>>>>>>>> importing historical data from external sources;
>>>>>>>> - wee_reports
>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wee_reports_utility> for
>>>>>>>> running reports without running WeeWX itself;
>>>>>>>> - weewxd <https://weewx.com/docs/4.9/utilities.htm#weewxd> the
>>>>>>>> main weewx program;
>>>>>>>> - wunderfixer
>>>>>>>> <https://weewx.com/docs/4.9/utilities.htm#wunderfixer_utility> for
>>>>>>>> resending data missing on the Weather Underground site.
>>>>>>>>
>>>>>>>>
>>>>>>>> *And then to find them....*
>>>>>>>>
>>>>>>>> Location of WeeWX components¶
>>>>>>>> <https://weewx.com/docs/5.0/usersguide/where/#location-of-weewx-components>
>>>>>>>>
>>>>>>>>
>>>>>>>> Executables*BIN_ROOT*/usr/share/weewx/
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> *But when I look in that directory....*
>>>>>>>>
>>>>>>>> @spi-1:/usr/share/weewx $ ls
>>>>>>>> __pycache__ weecfg weectl.py weeimport weeutil weewx_data
>>>>>>>> schemas weectllib weedb weeplot weewx weewxd.py
>>>>>>>> @spi-1:/usr/share/weewx $
>>>>>>>>
>>>>>>>> *None of them show up. What am I missing?*
>>>>>>>>
>>>>>>>> *Thanks*
>>>>>>>> *Scott*
>>>>>>>>
>>>>>>>>
>>>>>>>> On Sunday, February 2, 2025 at 12:03:03 PM UTC-5 scott pierce wrote:
>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>> I was able to update the confi file and change the Debug to
>>>>>>>>> 1...which in itself is a huge win as it took me a while to figure out
>>>>>>>>> how
>>>>>>>>> to even access the file. (permissions have been a bear to learn). I
>>>>>>>>> have
>>>>>>>>> read a lot in the last 24 hours!
>>>>>>>>> That said, I still don't know how to access any additional log
>>>>>>>>> information. When I run the status check, it comes back with
>>>>>>>>> basically the
>>>>>>>>> same info...
>>>>>>>>> × weewx.service - WeeWX
>>>>>>>>> Loaded: loaded (/lib/systemd/system/weewx.service; enabled;
>>>>>>>>> preset: enabled)
>>>>>>>>> Active: failed (Result: exit-code) since Sun 2025-02-02
>>>>>>>>> 11:35:11 EST; 23min ago
>>>>>>>>> Duration: 18min 49.054s
>>>>>>>>> Docs: https://weewx.com/docs
>>>>>>>>> Process: 1261 ExecStart=weewxd /etc/weewx/weewx.conf
>>>>>>>>> (code=exited, status=4)
>>>>>>>>> Main PID: 1261 (code=exited, status=4)
>>>>>>>>> CPU: 873ms
>>>>>>>>>
>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine:
>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 1444,
>>>>>>>>> in
>>>>>>>>> _setup
>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine:
>>>>>>>>> **** self.hardware_type = self._determine_hardware()
>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine:
>>>>>>>>> **** ^^^^^^^^^^^^^^^^^^^^^^^^^^
>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine:
>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 1435,
>>>>>>>>> in
>>>>>>>>> _determine_hardware
>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine:
>>>>>>>>> **** raise weewx.WeeWxIOError("Unable to read hardware type")
>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL weewx.engine:
>>>>>>>>> **** weewx.WeeWxIOError: Unable to read hardware type
>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL __main__: Unable to
>>>>>>>>> load driver: Unable to read hardware type
>>>>>>>>> Feb 02 11:35:11 spi-1 weewxd[1261]: CRITICAL __main__: ****
>>>>>>>>> Exiting...
>>>>>>>>> Feb 02 11:35:11 spi-1 systemd[1]: weewx.service: Main process
>>>>>>>>> exited, code=exited, status=4/NOPERMISSION
>>>>>>>>> Feb 02 11:35:11 spi-1 systemd[1]: weewx.service: Failed with
>>>>>>>>> result 'exit-code'.
>>>>>>>>> ~
>>>>>>>>>
>>>>>>>>> Thanks
>>>>>>>>> Scott
>>>>>>>>> On Saturday, February 1, 2025 at 10:51:51 PM UTC-5 John Kline
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> If you set debug = 1 and restart weewx, we’ll get to see the
>>>>>>>>>> hardware_type read from the envoy.
>>>>>>>>>> The line in the log will contain “Hardware type is “
>>>>>>>>>>
>>>>>>>>>> On Feb 1, 2025, at 6:34 PM, scott pierce <[email protected]>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>> Successfully installed WeeWX on Rpi 5 and it's ingesting data
>>>>>>>>>> from Davis Envoy USB Weather Link data logger.
>>>>>>>>>>
>>>>>>>>>> Also, I have been able to view reports...so that's nice.
>>>>>>>>>> I'm just beginning this journey so still a lot to learn and set
>>>>>>>>>> up.
>>>>>>>>>> One quick question I can't find an answer to in the group or in
>>>>>>>>>> notes...
>>>>>>>>>> when I run a status check this is the result...
>>>>>>>>>> × weewx.service - WeeWX
>>>>>>>>>> Loaded: loaded (/lib/systemd/system/weewx.service; enabled;
>>>>>>>>>> preset: enabled)
>>>>>>>>>> Active: failed (Result: exit-code) since Sat 2025-02-01
>>>>>>>>>> 21:18:12 EST; 7min ago
>>>>>>>>>> Duration: 35min 33.415s
>>>>>>>>>> Docs: https://weewx.com/docs
>>>>>>>>>> Process: 6313 ExecStart=weewxd /etc/weewx/weewx.conf
>>>>>>>>>> (code=exited, status=4)
>>>>>>>>>> Main PID: 6313 (code=exited, status=4)
>>>>>>>>>> CPU: 2.339s
>>>>>>>>>>
>>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine:
>>>>>>>>>> **** log.debug("Hardware name: %s", self.hardware_name)
>>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine:
>>>>>>>>>> **** ^^^^^^^^^^^^^^^^^^
>>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine:
>>>>>>>>>> **** File "/usr/share/weewx/weewx/drivers/vantage.py", line 1416,
>>>>>>>>>> in
>>>>>>>>>> hardware_name
>>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine:
>>>>>>>>>> **** raise weewx.UnsupportedFeature("Unknown hardware type %d"
>>>>>>>>>> %
>>>>>>>>>> self.hardware_type)
>>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL weewx.engine:
>>>>>>>>>> **** weewx.UnsupportedFeature: Unknown hardware type 10
>>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL __main__: Unable to
>>>>>>>>>> load driver: Unknown hardware type 10
>>>>>>>>>> Feb 01 21:18:12 spi-1 weewxd[6313]: CRITICAL __main__: ****
>>>>>>>>>> Exiting...
>>>>>>>>>> Feb 01 21:18:12 spi-1 systemd[1]: weewx.service: Main process
>>>>>>>>>> exited, code=exited, status=4/NOPERMISSION
>>>>>>>>>> Feb 01 21:18:12 spi-1 systemd[1]: weewx.service: Failed with
>>>>>>>>>> result 'exit-code'.
>>>>>>>>>> Feb 01 21:18:12 spi-1 systemd[1]: weewx.service: Consumed 2.339s
>>>>>>>>>> CPU time.
>>>>>>>>>>
>>>>>>>>>> I'm guessing I put the hardware name in wrong in setup...not
>>>>>>>>>> sure. Also don't know where to look to check.
>>>>>>>>>> Any suggestions are appreciated.
>>>>>>>>>> Thanks
>>>>>>>>>> Scott
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> You received this message because you are subscribed to the
>>>>>>>>>> Google Groups "weewx-user" group.
>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>>>>> send an email to [email protected].
>>>>>>>>>> To view this discussion visit
>>>>>>>>>> https://groups.google.com/d/msgid/weewx-user/b5df5db2-394b-4467-8c33-f50631f7f65dn%40googlegroups.com
>>>>>>>>>>
>>>>>>>>>> <https://groups.google.com/d/msgid/weewx-user/b5df5db2-394b-4467-8c33-f50631f7f65dn%40googlegroups.com?utm_medium=email&utm_source=footer>
>>>>>>>>>> .
>>>>>>>>>>
>>>>>>>>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion visit
https://groups.google.com/d/msgid/weewx-user/19a162f4-0238-436b-8548-200881315b90n%40googlegroups.com.
