I have vantage pro 2 station and weatherlink live with ethernet connection. I have used the standard pip installation and copied all the commands into the terminal as indicated in the guide on the WEEWX website. In Weewx.conf i entered the ip address of the weatherlink live. Otherwise i have not touched any file. I could not verify the installation because there ìs no public_html/index.html in weewx-data.
Op donderdag 13 februari 2025 om 22:05:12 UTC+1 schreef vince: > It means you likely have a typo on your port line in the Vantage driver > section, if you are connecting to the station over the network. You > provided no details regarding your setup so it is impossible to guess > otherwise. > On Thursday, February 13, 2025 at 11:22:46 AM UTC-8 Artvd wrote: > >> Hello I have been using Weewx for some years on an Raspberry Pi 3 (RPI) >> I wanted to upgrade to Weewx 5.1 but somewhere something went wrong and >> i decided to reinstall the RPI and then Weewx 5.1. Whilst doing so i >> encouter a problem. The logfile is below. I am not sure what it means and >> what i should do to repair it. [image: PXL_20250213_191532120.jpg] >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/eccbd030-1d82-45f8-8ddd-4dc78674c176n%40googlegroups.com.
