oh and another question I forgot to ask... I set the customizued server to enabled for the Interceptor Driver. Now, I assume, for the GW1000 driver it is not needed anymore, right ?
Markus Lösch schrieb am Donnerstag, 5. Juni 2025 um 09:06:05 UTC+2: > Thanks guys, I switched now to GW1000 Driver. Test driver also seems to be > looking quite good. > > Is there any chance to add the rain data in the database? I had 15.3mm > rain yesterday, which is also the week, month and year totatl, since I > started the weather station on tuesday night. > [image: rain.PNG] > > > vince schrieb am Mittwoch, 4. Juni 2025 um 23:08:17 UTC+2: > > In case you switch to the nice gw1000 driver via Ian's link, here's my old > config for my WS85 which is similar to your WS90, as well as the > incantation to test the driver interactively. Be a little forewarned this > was quite a while ago and I decommissioned the ecowitt haptic sensor > because it wasn't too accurate, but the weewx setup did work as I recall. > Your paths vs. the example --test-driver below will vary if you did a dpkg > installation. > > [GW1000] > # This section is for the Ecowitt Gateway driver. > > # How often to poll the API, default is every 20 seconds: > poll_interval = 20 > > # The driver to use: > driver = user.gw1000 > ip_address = 192.168.2.87 # gw1200 > port = 45000 > [[field_map_extensions]] > outTempBatteryStatus = wh26_batt > batteryStatus1 = wh31_ch1__batt > batteryStatus2 = wh31_ch2__batt > batteryStatus3 = wh31_ch3__batt > batteryStatus4 = wh31_ch4__batt > batteryStatus5 = wh31_ch5__batt > batteryStatus8 = wh51_ch1__batt > soilTemp1 = temp9 # wh34 > ######batteryStatus8 = wh34_ch1__batt > rain = p_rain > stormRain = p_rainevent > rainRate = p_rainrate > dayRain = p_rainday > weekRain = p_rainweek > monthRain = p_rainmonth > yearRain = p_rainyear > > windBatteryStatus = ws85_batt > > # PYTHONPATH=~/weewx/src python3 ~/weewx-data/bin/user/gw1000.py > --test-driver --ip-address=192.168.2.87 > # 2024-08-30 11:01:19 PDT (1725040879): 'dateTime': '1725040879', > 'daymaxwind': '2.9', 'extraHumid1': '56', 'extraHumid2': '54', > 'extraHumid3': '56', 'extraHumid4': '59', 'extraHumid5': '70', > 'extraTemp1': '23.3', 'extraTemp2': '22.2', 'extraTemp3': '22.1', > 'extraTemp4': '22.0', 'extraTemp5': '21.8', 'extraTemp9': '17.8', > 'inHumidity': '53', 'inTemp': '22.5', 'outHumidity': '77', 'outTemp': > '19.5', 'p_dayRain': '0.0', 'p_monthRain': '34.3', 'p_rain': 'None', > 'p_rainRate': '0.0', 'p_stormRain': '0.0', 'p_weekRain': '1.0', > 'p_yearRain': '42.4', 'pressure': '1006.5', 'relbarometer': '1006.5', > 'soilMoist1': '41', 'usUnits': '17', 'wh31_ch1_batt': '0', 'wh31_ch1_sig': > '4', 'wh31_ch2_batt': '0', 'wh31_ch2_sig': '4', 'wh31_ch3_batt': '0', > 'wh31_ch3_sig': '4', 'wh31_ch4_batt': '0', 'wh31_ch4_sig': '4', > 'wh31_ch5_batt': '0', 'wh31_ch5_sig': '4', 'wh32_batt': '0', 'wh32_sig': > '4', 'wh51_ch1_batt': '1.4', 'wh51_ch1_sig': '4', 'windDir': '280', > 'windGust': '1.2', 'windSpeed': '1.1', 'wn34_ch1_batt': '1.5', > 'wn34_ch1_sig': '4', 'ws85_batt': '3.08', 'ws85_sig': '4' > > > On Wednesday, June 4, 2025 at 2:01:24 PM UTC-7 Steeple Ian wrote: > > There is a fork of the GW1000 driver here which was synced with Gary's > main branch just before he went 'off air'. It is a better bet than the > Interceptor driver. I have GW1000, GW2000 and GW3000 devices and they all > wrk perfectly. > > https://github.com/Millardiang/weewx-gw1000 > > On Wednesday, June 4, 2025 at 10:37:53 PM UTC+2 Markus Lösch wrote: > > Also after some rain now, nothing shows up at rain. There is also nothing > written down in the database… > Anyone that can help? > > chin0x schrieb am Mittwoch, 4. Juni 2025 um 14:47:06 UTC+2: > > Hey guys, > > I've been going through some discussions but not quite sure if I did > everything rigth. > > Due to the circumstances that the GW1000 Driver is all of a sudden not > available anymore, I decided to use the Interceptor driver when I changed > from "Simulation" to "Productive" mode yesterday evening. > > I found out that the rain is not available in the database and saw some > discussions about it. > What I now did was adding some values to the Interceptor Stanza in the > weewx.conf: > [Interceptor] > > driver = user.interceptor > device_type = ecowitt-client > port = 8000 > [[sensor_map_extensions]] > rain = drain_piezo > rainRate = rrain_piezo > supplyVoltage = wh90batt > referenceVoltage = ws90cap_volt > > But it shows me no rain in my skins. Currently it is not raining, but > there was rain this morning. Is the data only filling the actuall rain into > the database or also the data from this morning? If not from this morning, > how can I insert that data afterwards ? > > in the log it shows me the following entries: > Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized > parameter runtime=80319 > Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized > parameter heap=94012 > Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized > parameter vpd=0.071 > Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized > parameter rrain_piezo=0.000 > Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized > parameter erain_piezo=0.157 > Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized > parameter hrain_piezo=0.008 > Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized > parameter drain_piezo=0.157 > Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized > parameter wrain_piezo=0.157 > Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized > parameter mrain_piezo=0.157 > Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized > parameter yrain_piezo=0.157 > Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized > parameter srain_piezo=1 > Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized > parameter ws90cap_volt=2.5 > Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized > parameter ws90_ver=155 > Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized > parameter wh90batt=3.14 > Jun 4 14:46:10 weewx weewxd[1727]: INFO user.interceptor: unrecognized > parameter interval=16 > > so rain is showing some values here... > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/032b665e-e83b-48dc-90c9-dff2c1f781aen%40googlegroups.com.
