I have been using Weewx for some years, and decided to export data to MQTT to put into HomeAssistant. It has been successful on Weewx version = 4.10.2 from Debian with Matthew Wall's MQTT extension. I have been following some instructions from a 2018 thread https://groups.google.com/g/weewx-user/c/MkP6Tacef7k and have managed to change units for rain on the MQTT extension but not for rainRate. When I had rainRate set for mm_per_hour Weewx refused to start.
log excerpt for one cycle which was successful and the next try with mm_per_hour in the config is attached offending part of weewx.conf also attached. Commenting out the three lines allows weewx to run The 2018 post describes success with using mm_per_hour for rain rate. The designation seems to be a current unit in https://weewx.com/docs/5.0/reference/units/ Can anyone help me to get mm_per_hour not cm_per_hour outputted by mqtt? Liz -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/0b563308-b34e-412a-9d41-6c73f1dd2c50n%40googlegroups.com.
<<attachment: conf_extract.doc>>
<<attachment: weewx_log.doc>>
