Fresh install of Trixie (Raspberry Pi OS Lite (64-bit)) on the Raspberry Pie that was running WeeWX 4.10.2 for years under Buster. After the upgrade to Trixie, I installed the latest copy of WeeWX and now I get this in debug
DEBUG weewx.drivers.acurite: Found station at bus= device= ERROR weewx.drivers.acurite: Failed attempt 1 of 10 to get LOOP data: [Errno 32] Pipe error I did removed the adapter, batteries of my Acurite console and rebooted the Pie. Still the same error (USB Mode 3 and 4 tried). Running dmesg | grep -i usb shows: [ 4.377914] usb 1-1.1.2: new low-speed USB device number 5 using dwc_otg [ 4.499443] usb 1-1.1.2: New USB device found, idVendor=24c0, idProduct=0003, bcdDevice= 0.20 [ 4.509628] usb 1-1.1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 4.518694] usb 1-1.1.2: Product: Chaney Instrument [ 4.526086] usbhid 1-1.1.2:1.0: can't add hid device: -22 *[ 4.533261] usbhid 1-1.1.2:1.0: probe with driver usbhid failed with error -22*[ 4.745931] usb 1-1.1.1: new high-speed USB device number 6 using dwc_otg [ 4.842201] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdDevice= 3.00 [ 4.852375] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 >From what I gathered, Trixie uses a much newer kernel with stricter HID validation and my old console USB port isn't compatible with Trixie's USB driver. What Acurite console can I use that would make it work with Trixie? My station is the 5in1 weather station. Thanks -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/b6619708-15f8-4a5a-a39c-ce9604242822n%40googlegroups.com.
