Hard to say without seeing the log. See the wiki section *How to produce a useful log <https://github.com/weewx/weewx/wiki/view-logs#how-to-produce-a-useful-log-report>* .
-tk On Mon, Jan 26, 2026 at 7:01 AM killic <[email protected]> wrote: > Hello, > > My WeatherLink IP accepts TCP connections on port 22222 but does not > respond correctly to the Vantage protocol: > > - Errors: "Unable to wake up console" > - Errors: "Broken pipe" during communication attempts > - Unable to read EEPROM at address 0x2D > - Device does not transmit continuous LOOP data > > *Current firmware:* 115 > *Hardware version:* 111 > > The device successfully sends historical archive data when WeeWX first > connects, but then stops communicating and disconnects. I've tested with > both a Proxmox LXC container and a Raspberry Pi 4, with the same results. > The TCP connection is established successfully (verified with netcat), but > the Vantage protocol communication fails. > > I've tried: > > - Restarting the WeatherLink IP (power cycle) > - Testing from different systems (LXC container and Raspberry Pi) > - Verifying network connectivity (TCP port 22222 is accessible) > - Using WeeWX 5.2.0 with the standard Vantage driver > > The WeatherLink IP continues to upload data to WeatherLink.com > successfully, but local connectivity via the Vantage protocol does not work. > > Can you help me resolve this issue? > > Thank you, > > > > *Additional testing:* > > - Tried with loop_on_init = True to skip archive download > - Result: Still "Unable to wake up console" and "Connection reset by > peer" > - The device refuses even the basic wake-up command > - TCP connection works (verified with netcat) but protocol > communication fails immediately > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion visit > https://groups.google.com/d/msgid/weewx-user/4151b8f8-021a-41f3-92e4-9f8500118f8an%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/4151b8f8-021a-41f3-92e4-9f8500118f8an%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/CAPq0zEBy1EcFf5vRLmfMG%2B4-LW-Z%2B98iPUnF_sUWUSyumRPB0w%40mail.gmail.com.
