This is what it should be:
Soil Temperature 50.9°F / 10.5°C at 15:15 Soil Conductivity (deciSiemens/meter) 0.03 dSm at 15:15 CO2 level (parts/million) 430 ppm at 15:45 Solar PV Volts (FARS) 0.00 V at 15:30 Ionizing Radiation Count per minute 15 cpm at 15:45 Ionizing Radiation Dose (microsieverts) 0.09 µSv at 15:45 On Sunday, March 29, 2026 at 3:58:57 PM UTC-4 [email protected] wrote: > > This is the display I get: > > > oil Temperature > 50.9°F / 10.5°C at 15:15 > Soil Conductivity > (deciSiemens/meter) > 0.030000 at 15:15 > CO2 level (parts/million) > 430 ppm at 15:45 > Solar PV Volts (FARS) > 0.000000 at 15:30 > Ionizing Radiation Count per minute > 15.428571 at 15:45 > Ionizing Radiation Dose (microsieverts) > 0.088571 at 15:45 > On Sunday, March 29, 2026 at 3:47:30 PM UTC-4 [email protected] wrote: > >> Tom, >> It’s both the « mu » not showing up and the data is not rounding >> correctly. It should look like my regular Standard display as seen on my >> site grattans.org/wx. I had the problem before with bookworm but I got >> it working—can’t remember exactly how I did it. I then transferred >> everything over to trixie on the new install and got this display problem. >> I have compared weewx.conf, weewx.css, skin.conf, index.html.tmpl and they >> all seem the same. Of course, I might have missed something but I wasn’t >> able to see a mistake. The data are coming in via MQTT but those sections >> seem to have transferred ok. Thanks for having a look. >> Bob >> >> On Sunday, March 29, 2026 at 2:34:16 PM UTC-4 Tom Keffer wrote: >> >>> Bob, could you be more specific about what you mean, "...not displaying >>> a couple of Geiger counter readings correctly." >>> >>> Is the problem the symbol itself? The formatting? Something else? >>> >>> On Sunday, March 29, 2026 at 8:54:33 AM UTC-7 [email protected] wrote: >>> >>>> As a non programmer, I am trying to slowly migrate my weewx 5.3.1 from >>>> bookworm to trixie, from one RPI5 to another with a fresh install on the >>>> new machine. Pip install. >>>> The old machine is running fine (grattans.org/wx) but the new one is >>>> not displaying a couple of Geiger counter readings correctly. >>>> >>>> The problem seems to be the Greek "mu" character and the data rounding >>>> format. The attached file shows my settings for both machines which is >>>> basically identical, I think. >>>> >>>> I'm wondering if the move to the new version of python is causing >>>> display problems which worked correctly in the previous version? I've >>>> attempted to move things intact from one computer to the new one but have >>>> possibly made a mistake at some point. >>>> >>>> Thanks in advance for any insight here. >>>> Cheers, >>>> Bob >>>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/weewx-user/fd24ca9c-93be-4fd4-a67a-925e519422aen%40googlegroups.com.
