RE: [WhatsUp Forum] cant get paging to work

[Tonya Spurlock]

Title: Nachricht

When using a HyperTerminal I get “no answer.”� I am trying to locate me an older modem (33.6) to see if maybe it will work.� But if you know other things to try keep them coming I will try anything.   Again…..Thanks…., Tonya Spurlock   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Dahinden Erwin Sent: Monday, January 20, 2003 8:39 AM To: '[EMAIL PROTECTED]' Subject: AW: [WhatsUp Forum] cant get paging to work   What happens if you try to connect your pager service with the windows terminal emulation program (hyperterminal)? Do you get a connection?   Erwin -----Urspr�ngliche Nachricht----- Von: Tonya Spurlock [mailto:[EMAIL PROTECTED]] Gesendet: Montag, 20. Januar 2003 15:13 An: [EMAIL PROTECTED] Betreff: RE: [WhatsUp Forum] cant get paging to work Still getting the same "no carrier" error when testing the pager.� I tried changing the modem initialization string to X1, X2, X3, and X4, but neither worked.�   Thanks, Tonya Spurlock   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Dahinden Erwin Sent: Monday, January 20, 2003 1:03 AM To: '[EMAIL PROTECTED]' Subject: AW: [WhatsUp Forum] cant get paging to work   Hello   Try to change the modem initialize string. One of the biggest problem is to set the X-Parameter to the right value. Try the values X1, X2, X3 and X4.   Good Look Erwin -----Urspr�ngliche Nachricht----- Von: Tonya Spurlock [mailto:[EMAIL PROTECTED]] Gesendet: Freitag, 17. Januar 2003 17:54 An: [EMAIL PROTECTED] Betreff: [WhatsUp Forum] cant get paging to work I have looked in the kb and on this forum and as of yet I haven't been able to find anything that helped...� I am trying to setup my paging, however when I enter in all of my information and hit test I get the following error "no carrier".� I hear the modem dial out and pick up but then "no carrier" and I get a pop up saying "pager failed."� I have tried commas in behind the number it too was unsuccessful.� Here are the settings I am currently using:   Display name:� Test Terminal number:� "the number I received from my paging service" which is metrocall Terminal password:� "this isn't needed" Pager ID;�� " I entered in my pager number here" Message string;� "using default" Protocol:� TAP-"confirmed with my pager service Modem Initialization string:� "using default" Baud Rate:� 2400 COM Port: COM 1 8N1 is NOT checked   I am currently using brand new� US Robotics 56k faxmodem.   �Any and all suggestions would be very helpful. Thanks in advance, Tonya Spurlock