After taking a moment to evaluate my question, I figured I should clarify a bit of the situation.
I'm not monitoring a specific device, the machine runnning MRTG is also an IDS machine, and sits in a DMZ. Span's are set up on the switch to send all traffic to this machine, so in essence, all I'm monitoring is the traffic on the ethernet port on the MRTG machine. Hopefully that answers questions in advance! -David -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jones, David H Sent: Wednesday, August 13, 2003 11:29 AM To: [EMAIL PROTECTED] Subject: [WhatsUp Forum] OT - MRTG Port Monitoring I know this is off topic, but there seems to be a lot of MRTG gurus on this list. With the RPC DCOM worm out there, we're looking to monitor traffic patterns for certian ports, specifically 135 and 139. I was wondering if someone could give me some pointers on how to create this graph in MRTG, or point me to some good documentation to do so. I poked around the MRTG site, but didn't really find anything helpful. Thanks a lot! -David Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/ Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/whatsup_forum%40list.ipswitch.com/
