I'm getting a little closer. On Nero Express 6, I found a command to "Burn Image to Disc". Because pebuilder.iso had been created in my earlier run of 3.1.3, it burned something which seemed to have an autorun.inf along with other files. When inserting the CD-RW (learning) in an already running machine, it comes with a "Go" button (like the start button).
However, when I set the CD as the first boot device, and reboot, the machine stops at "Boot from ATAPI CD-ROM:" with a flashing cursor. No amount of key pressing, punching, smashing, swearing at, ... , allows me to get past that point. I would assume that I've done something wrong with BIOS, but don't know enough to know what. Next? Al ----- Original Message ----- From: "Wayne Johnson" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, November 25, 2005 1:15 PM Subject: Re: Nero Express 6 > At 03:15 PM 11/25/2005, Kylde typed: > >sounds like a Wayne thang .. :) > > It might be a Bart "thang" as PE Builder could call up Nero [not > Express] but in the old days when PE Builder was just a child I had > to write my own batch file to do such things but Bart now includes > cdrecord.exe & burns the ISO that you created directly if you so > chose with PE Builder 3.1 & above. If one doesn't create the ISO with > PE Builder then one MUST use Nero or some other image burning app. > > If I were to create say a self extracting archive that I wanted to > burn I might be inclined to have the archive when finished extracting > call Nero [not Express] from it's default location then that would be > a Wayne "thang" but of course one would NOT be limited to burn the > ISO with Nero if it wasn't there. ;-) > > ----------+---------- > Wayne D. Johnson -- ---------------------------------------- The WIN-HOME mailing list is powered by L-Soft's renowned LISTSERV(R) list management software. For more information, go to: http://www.lsoft.com/LISTSERV-powered.html
