On Mon, 21 Feb 2005 21:49:32 +0100 Rein Klazes <[EMAIL PROTECTED]> wrote:
> On Sun, 20 Feb 2005 16:41:09 +0100, you wrote: > > > On Sun, 20 Feb 2005 16:04:54 +0100 > > Rein Klazes <[EMAIL PROTECTED]> wrote: > > > > > > Does this patch help? > > > > > > Rein. > > > > Unfortunately not - still the exact same error. > > Surprise :( > > OK, I can try once more, perhaps the counter is much more then the > program expects (it resets when windows is restarted, here it counts up > from 1970/1/1). Try attached patch (first reverse previous patch, them > make; make install and test again) > > Then if it does not work. As the patch fixes a real problem, reverting > is not an option. You will need to debug this to find out why the crash > happens. > > If you run this with WINEDEBUG=+relay, can you look for both > QueryPerformanceCounter or QueryPerformanceFrequency in the lines just > before the crash? > > With some luck the addresses of the call (look at ret=......) is near > where the crash happens ( it is reported by the debugger: 0x00500280) > and we can look at the disassembled code (debugger command > "disass adr1, addr2"). > > Rein. Thanks a lot! That did it. Everything is back to normal again. -- Sebastian Schlingmann