Correction
Le 25/08/2021 à 17:25, Daniel a écrit :
Hi list,
I setup wireguard on a server running Debian 11 and get it to work with
2 clients (Debian 11 and Ubuntu 20.04). Clients and server are on
separate networks, one client behind a FW the other direct on Internet,
no FW at all (VPS).
With this setup and ipv4 connection to the public IP of the server,
everything is working as expected, ipv4 as well as ipv6 are passing
smoothly.
Now I want to connect using the ipv6 address of the wg interface as both
clients and server have ULA ipv6.
Here is GUA to read.
This fail, wg show that connection is
established but VPN is not usable. It's not a FW problem as I can ssh to
the ipv6 address, as well as a netcat test from/to server IP -from each
client- on an UDP port is working properly. Also,
net.ipv6.conf.all.forwarding=1 is activated in sysctl.conf
All network stuff is done in /etc/network/interfaces which call the
config file. The ipv6 address of the server is affected _to the
wireguard interface_ (in ipv4 it's another interface who take care of
the public address)
Server version is wireguard-tools v1.0.20210223.
If someone have any hint, thanks to share ;)
--
Daniel Huhardeaux
+33.368460...@tootai.net sip:8...@sip.tootai.net
+41.445532...@swiss-itech.ch tootaiNET
