Hi. I noticed a massive performance regression for WireGuard on Ubuntu 20.04, Ubuntu 22.04 and Fedora 37. I reported in Ubuntu and Fedora users mailing list and was advised to post here.
It's possible I did something wrong(?), but I have fully reproducible steps to demonstrate this issue on a vanilla DigitalOcean droplet, minimal WireGuard configuration and no firewall rules. I've also seen this issue on other hosting providers. Testing between two droplets (over VPC) with `iperf3 -c XXX -P 5`: - DigitalOcean's VPC = ~2Gbps - WireGuard Ubuntu 18.04 = ~1.3Gbps - WireGuard Ubuntu 20.04 = ~400Mbps - WireGuard Ubuntu 22.04 = ~400Mbps - WireGuard Fedora 37 = ~400Mbps htop reported only 20-30% load on the vCPU core so it isn't CPU-bound. After doing these tests, I did them all again on a different day to rule out temporary network congestion. Steps to reproduce below. Repeat with each OS version. 0. Create a DigitalOcean account. 1. Create two $6 droplets (eg, LON1 region) with Regular CPU & 1GB RAM each, called test01 & test02. 2. `apt-get update && DEBIAN_FRONTEND=noninteractive apt-get dist-upgrade -y && reboot` 3. `apt-get install -y wireguard iperf3` 4. On test01, create `/etc/wireguard/test.conf` with these contents. Replace `YYY` with the IP address of the eth1 interface (VPC) on test02. -------------------- [Interface] PrivateKey = wOEa8/RS2v065wgYGQn5k7FqOXuZJ9aC/6NDW569c3g= Address = 192.168.200.10/24 ListenPort = 51820 SaveConfig = false [Peer] PublicKey = wdXOzBptLD/QMZjhG475GErrz95Vpj4S7JPEwzcDMV8= PresharedKey = j5Oeyhu/qDag2LunpVlFqKycp/9CH+Izjza5aq2cYss= Endpoint = YYY:51820 AllowedIPs = 192.168.200.20/32 -------------------- 5. On test02, create `/etc/wireguard/test.conf` with these contents. Replace `XXX` with the IP address of the eth1 interface (VPC) on test01. -------------------- [Interface] PrivateKey = kCJ/4rVDTy86HxP9N5wUmgMF1Esqjc051jQPGhrQIGw= Address = 192.168.200.20/24 ListenPort = 51820 SaveConfig = false [Peer] PublicKey = s/GtXkHOtPsqcNDy0BSRoMuxXYb4hK18dsQdkZk20yQ= PresharedKey = j5Oeyhu/qDag2LunpVlFqKycp/9CH+Izjza5aq2cYss= Endpoint = XXX:51820 AllowedIPs = 192.168.200.10/32 -------------------- 6. On both droplets, run `systemctl start wg-quick@test` 7. On test01, run `iperf3 -s -B XXX`. 8. On test02, run `iperf3 -c XXX -P 5 -t 30` and observe ~2Gbps. 9. On test01, run `iperf3 -s -B 192.168.200.10` 10. On test02, run `iperf3 -c 192.168.200.10 -P 5 -t 30` and observe ~400Mbps. In steps 7 and 8, replace XXX with the IP address of the eth1 interface on test01.