We are currently testing setting up our Cisco Aironet 1100 and 1200 infrastructure with multiple VLANs
Our test device is statically configured for VLAN 168. We have another test VLAN 19 which we want to have trunked to the device. The access point is connected to a port on a Cisco 4500 chassis running native IOS. The port configuration that is currently on is: interface FastEthernet2/36 switchport access vlan 168 switchport trunk encapsulation dot1q switchport trunk native vlan 168 switchport trunk allowed vlan 1,19,168,998,999,1001-4094 qos trust cos no snmp trap link-status tx-queue 3 priority high spanning-tree portfast **************************** If I do a 'sh vlan id 19' on the same switch it does not show the VLAN active on the same port Should I be configuring the port differently to carry multiple VLANs to the access point? Any clues would be appreciated... Ranjit Philip ITR Network Engineering California State University, Northridge ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
