Thanks all, I'll have to do the same (script to check). Mike
On Mon, Apr 28, 2014 at 11:42 AM, Earl Barfield < earl.barfi...@oit.gatech.edu> wrote: > On 04/26/14 00:00, WIRELESS-LAN automatic digest system wrote: > >> Date: Fri, 25 Apr 2014 17:49:42 -0700 >> From: Mike Albano<mike.alb...@unlv.edu> >> Subject: Disabled 2.4 Radios not staying disabled >> >> Anyone else seeing this? >> Cisco Wism2's ver. 7.6.100.10 (though I believe it affects all 7.6) >> When I disable radios "config 802.11b disable <ap_name>" the radios turn >> themselves back on after a "config ap reset" or power outage, changing AP >> Group's etc. Basically, when the AP reboots, the radio re-enables itself. >> >> TAC case pending. >> >> Mike Albano >> >> > > Yes, we saw this back with 7.4.103.6. It only did this if the AP had > a non-default RF profile. We opened a tac case (in Jun 2013) but > I don't see that a bugid was ever assigned. > > As a workaround, I wrote a simple script that periodically queries our > Airwave Management Platform server and alerts me if any radios are not > in the desired state. > > > > > > -- > Earl Barfield -- Academic & Research Tech / Information Technology > Georgia Institute of Technology, Atlanta Georgia, 30332 > Internet: earl.barfi...@oit.gatech.edu e...@gatech.edu > > ********** > Participation and subscription information for this EDUCAUSE Constituent > Group discussion list can be found at http://www.educause.edu/groups/. > ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
