Yep, we used all of the parts that came with them and they are sitting in server cabinets as well.
Respectfully, Matthew Williams IT Manager, Wireless Kent State University Office: (330) 672-7246 Mobile: (330) 469-0445 From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU] On Behalf Of Sullivan, Don Sent: Friday, January 16, 2015 10:58 AM To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU Subject: Re: [WIRELESS-LAN] Cisco 8510 Controllers We have 2 8510s and we are using a 4 post rack (server cabinet). We are not seeing this. Did you use the rack mounts that came with the 8510s? Don Sullivan Network Adminstrator Samford University 205-726-2111 From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU] On Behalf Of Williams, Matthew Sent: Friday, January 16, 2015 9:44 AM To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU<mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU> Subject: [WIRELESS-LAN] Cisco 8510 Controllers Good morning all, We've got 8 Cisco 8510 controllers that we are getting ready to deploy and we've run into a very strange issue. The 8510 controller is a 1 RU server-like form factor that requires a 4-post rack. We've racked 4 of them and all 4 of them are literally bowing at the join between the "board" and power supplies. Has anyone else with 8500s seen this? Respectfully, Matthew Williams IT Manager, Wireless Kent State University Office: (330) 672-7246 Mobile: (330) 469-0445 ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
